Tender For Special Repair To Building No Et-15 And Et-16 At Mes Under Ge Saugor
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
12 Oct 2026
8 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No Et-15 And Et-16 At Mes Under Ge Saugor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Sep-2026 | Corrigendum No 01 | Date | 12-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 2 | M&L for 20mm thick cement plaster on brick / concrete/ stone surfaces in two coat (Ist coat 15mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mixed with liquid WPC @ 200ml Per litre) , finished surface fair and even complete all as specified and directed.Note:-WPC will be paid separately under respective item. |
| 3 | M&L for rendering cement plaster, 15mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 4 | M&L for rendering cement plaster, 5mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling by fully automatic airless spray machine as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 6 | M&L for complete removal of existing treatment using mechanical scrapping machine and applying two coats of cement base wall care putty by fully automatic airless spray machine in two coats @ 1Kg/Sqm (0.5Kg in each coat) on of wall/ceiling surfaces as preparatory work to painting including removing of nails, making good holes, cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 7 | M&L for applying two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall by fully automatic airless spray machine complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions |
| 8 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer by fully automatic airless spray machine on prepared surfaces of wall/ceiling complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass, joinery, electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 9 | M&L for applying two coats of cement base paint over and including one coat of exterior primer on prepared surfaces of wall by fully automatic airless spray machine complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions |
| 10 | M&L for two coats of white wash on old decorative ceiling surfaces including preparation of surface by, brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed. |
| 11 | Demolition of cement concrete (unreinforced) in ground floors and pavings (below or above ground level), n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 12 | M&L for 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregates) as in plinth protection finishing surface even and smooth without using extra cement including providing construction joint (at an interval not more than 3.0m) and filled with bitumen and sand mortar in 1:3 complete all as specified and directed. |
| 13 | Demolition of cement concrete (reinforced) below or above the ground floor, not exc 15cm thickness (reinforcement cut as required to facilitate demolition) such as in cooking platform, chajja etc complete all as specified and directed. |
| 14 | M&L for RCC( Nominal mix), 1:2:4 type B-1 (using 20mm graded stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 15 | M&L for mild steel TMT bars 10 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 16 | M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gde Fe... complete all as specified and directed. |
| 17 | M&L for Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing), any description including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 18 | M&L for 25mm thick PCC (1:2:4) type B-0 (using12.50mm graded stone aggregate) as in levelling course to sub base, finished surface rough to receive the tiles complete all as specified and directed. |
| 19 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base for floors, finished surface even and rough to receive the top finishing floor course complete all as specified and directed. |
| 20 | S&F 60mm thick Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment, any shape and size confirming to IS- 15658-2006 of M-35 grade, laid on 50mm thick sand cushion complete all as specified and directed.Note: The cost of sand cushion shall be deemed included in quoted unit rates.Make: M/S MEHTAB TILES, M/s NITCO (NITCO), M/s SUPREME TILES (SUPREME) |
| 21 | M&L for full body vitrified ceramic coloured tiles in floors etc, 8 to 10mm thick, area of each tiles exc 0.36 sqm but n'exc 1.20 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 22 | All as per item 21 above but as in Dado/skirting fixed over and including 10mm thick rendering in CM (1:4). |
| 23 | M&L for Non skid ceramic coloured tiles in floors etc, 7mm thick, area of each tiles exc 0.11 sqm but n'exc 0.18 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 24 | M&L for digital glazed ceramic coloured tiles on vertical surfaces, 8 to 10mm thick, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm (square/ rectangular), fixed with costra tile adhesive cosmic silvwe type 1T (EN-STD C1TE) over and including 10mm thick rendering in CM 1:4 as bedding layer complete all as specified and directed. |
| 25 | M&L for 16 to 18mm thick Granite slab of any shade (table rubbed and polished), machine cut for floors / shelves in steps, jambs, pillars, window cills & cooking platforms laid over and including 15 mm thick cement mortar 1:4 bedding, pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs, complete all as specified and directed |
| 26 | M&L for rounding to the edge of stone slabs one edges such as in steps, cooking platform and other similar situations complete all as specified and as directed. |
| 27 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 28 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm single sideprelam colour PVC sheet, reinforced with M.S. Square tube including painting edges to match with prelam sheet, fixed in opening with fastnes as per specification & drawing complete all as specified and directed. |
| 29 | S&F Factory made 30mm thick (stiles), Solid PVC Moulded Door Shutter with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixed in frame at site as per specification & drawing complete all as specified and directed. |
| 30 | S&F100mm long stainless steel butt hinges, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 31 | S&F 150mm long stainless steel barrel tower bolt, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 32 | S&F 100mm size stainless steel handle, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 33 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 34 | S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 35 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 36 | S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 37 | M&L for 2nd class HW (Teak) glazed and skeleton shutters ( factory made), 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkhats complete all as specified and directed.Note: (i) The glass and wire gauge shall be measured and paid separately under respective item here under. |
| 38 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 39 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise descri-bed, over 10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 40 | S&F 200mm long stainless steel barrel tower bolt, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 41 | S&F 150mm size stainless steel handle, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 42 | S&F 300mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel nut & bolts and fixed complete all as specified and directed. |
| 43 | S&F Aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixedcomplete all as specified and directed. |
| 44 | S&F 150mm long stainless steel floor door stopper, 304 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 45 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 46 | M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed |
| 47 | M&L for Brickwork with sub- class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed |
| 48 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 49 | S&F roof trusses ( framed), trussed, purlin, crane gantries, rails and fastenings and heavy bracket framing (beams, tee, angle, channel or flat sections) including distance pieces, cleats etc (welded/riveting) conforming to Fe 410-W (Gde-E250) quality 'A' complete all as specified and directed. |
| 50 | S&F pre-painted galvalume sheet 0.50 mm thick having aluminium zinc coating 150 gsm/ sqm double ribbed trapezoidal profile / corrugated steel sheet any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete, complete all as specified and directed. |
| 51 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 52 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 53 | S&F factory made uPVC white colour casement (Openable) window (area not exceeding 2.00 sqm each) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of 'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. and required accessories complete all as specified and directed.Note: The unit rate quoted by contractor includes cost of all fitting and fixtures, glass, and all other connected accessories. Net opening will be measured for payment purpose |
| 54 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 55 | M&L for Providing & fixing false ceiling at all heights with Semi perforated 12 mm thick Micro Tegular edged GRG (Glass Fibre Reinforced Gypsum) ceiling tiles of Size 595x595 mm of approved texture, design and patterns laid/fixed in true horizontal level inter-locking grid system suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shaped level adjuster of size 85x25x2 mm complete all as specified and directed. Note : (i) The snap grid system shall be consisted with hot dipped galvanized iron 'T' sections of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) and Galvanized iron perimeter wall angle sections.(ii) The main-T runners shall be of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm. The wall angle shall be of size 20 x 20 x 0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. (iii) GRG false ceiling tiles shall conforming to IS:2095 Part3, 2022 with a moisture content of less than 2%, humidity resistance of 99%, NRC ranging from 0.50 to 0.75 as per IS 8225:1987, non-combustible as per BS 476 (Part 4)-1970, and a minimum light reflectance of 90%. (iv) The work shall be carried out strctly as per specifications, drawing, manufecture's instructions, and as per directions of the Engineer-in-Charge.. |
| 56 | S&F in repair 25mm dia stainless steel (202 Grade) curtain rod not less than 0.70mm thick with decorative end caps (Latoo) and brackets complete all as specified and directed.Note : In openings exceeding 1.2m wide, additional brackets shall be provided so as the distance between two consecutive brackets shall not exceed 1.2m. |
| 57 | S&F in repair 18 mm thick prelaminated HDHMR board, laminated one side decorative choice printed/coloured PVC sheet and other side white PVC sheet, as in cupboards, shelves, pelmets etc, cut to required size and fixed to frame/any location as required/ directed complete all as specified & directed. |
| 58 | S&F kitchen sinks with drainage board, made out of 304 grade 0.8mm/1.0mm thick stainless steel sheet with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe including taking down existing sink of any description complete all as specified and directed.Make : Nirali (Popular range-SMALL-glossy finish) /Cera(Cat part No B4512122-glossy finish)/Johnson (Cat part No K030206SBG) |
| 59 | S&F Stainless steel Plate Rack, 900mmx600mmx250mm in size, made of 1mm thick 202 grade stainless steel sheet including taking down existing Plate rack ( any description) complete all as specified and directed. |
| 60 | M&L for refixing GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 61 | M&L for 20 mm outer dia CPVC pipes, SDR 11 grade including fittings on walls/ceiling or laying in floors including taking down existing tubing of any description complete all as specified and directed.Note : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 62 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 63 | M&L for refixing GI tubing 20mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 64 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, girth not exc 10 cm complete all as specified and directed. |
| 65 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank (any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 66 | M&L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed. |
| 67 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings of any discription and type complete all as specified and directed. |
| 68 | S&F in repair 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe complete all as specified and directed. |
| 69 | S&F Vitreous china vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe complete fixed including dismantling/taking down existing WC of any description, complete all as specified and directed.Make : Essco (Cat Part No ECS-WHT-451 or equivalent Hindware/ johans/ parryware |
| 70 | S&F Wall Hung Cistern (Compatible with 39mm Drainage Pipes) with Black Top & Installation Kit with Drainage Pipes of require length, connectyion to WC complete including dismantling/taking down existing cistern of any description, complete all as specified and directed.Make : Jaquar (Cat Part No ESH-WHT-184NBTT or equivalent Hindware/ johans/ parryware |
| 71 | S&F Vitreous china Wall Hung Basin with Fixing Accessories, Full Pedestal Wash Basin, Size: 560x415x200 mm including dismantling/taking down existing BHB of any description, complete all as specified and directed.Make : Essco (Cat Part No ECS-WHT-805- Basin & cant Part No. ECS-WHT-301- Full Pedestal) or equivalent in Hindware / Johanson/ Parryware |
| 72 | S&F Bib cock with wall flange, chromium plated, including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No FUP-CHR-29037PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 73 | S&F 15mm bore 2 Way Bib Cock with Wall Flange chromium plated including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar-(Cat Part No FUP-CHR-29041PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 74 | S&F Angular Stop Cock with Wall Flange, chromium plated with required accessories including taking down existing tap of any description, complete in all respect as specified and directed. Make : Jaquar (Cat Part No FUP-CHR-29053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 75 | S&F in repair 15mm dia SS-304 Heavy Duty Connection Pipe for Wash Basin, Geyser, Hot & Cold Water, Basin Mixer | Leak Proof Flexible Tap Connector Pipe | Rust Free, Durable, Long Life , 450mm long, complete all as specified and directed. |
| 76 | S&F in repair purposely moulded looking mirror 5mm thick glass (width not less than 600mm) fixed with studs complete all as specified and directed.Make : Saint-Goblin/Modi Guard/Asahi India (AIS) |
| 77 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors including taking down existing pipe of any description complete all as specified and directed. |
| 78 | S&F in 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall including taking down existing pipe of any descriptioncomplete all as specified and directed. |
| 79 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches or in floors including taking down existing pipe of any description complete all as specified and directed. |
| 80 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointed fixed to wall including taking down existing pipe of any description complete all as specified and directed. |
| 81 | S&F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified and directed.. |
| 82 | S&F PVC (SWR) bends, 110mm bore dia complete all as specified and directed. |
| 83 | S&F PVC (SWR) bends, 75 mm bore dia complete all as specified and directed. |
| 84 | S&F PVC (SWR) bends, 75 mm bore dia with access door complete all as specified and directed. |
| 85 | S&F 110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius , with access door, complete all as specified and directed. |
| 86 | S&F 75 mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius, complete all as specified and directed. |
| 87 | S&F repair 110mm dia PVC (SWR) vent cowl, complete all as specified and directed. |
| 88 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed. |
| 89 | S&F 6mm thick teak wood lipping on exposed edges of ply wood board/ flush shutter, fixed with nails including polishing complete all as specified and directed. |
| 90 | Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 91 | Taking down main switch, DB/Change over/VTPN, AC box from wall/ wooden board etc , any description and any capacity with MCB(s) / MCCB(s) including disconnection of electric connections complete all as specified and directed |
| 92 | M&L for concealed point wiring for one light point or fan/exhaust point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description of wiring cable complete all as specified and directed. Note:-(i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge .(ii) Cutting, chasing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 93 | All as per item No. 92 above but point wiring for one Call Bell point controlled by one bell push button switch. |
| 94 | All as per item No. 92 above but point wiring for one 5 Amp socket point on independent board controlled by one switch and with 2.5 Sqmm wiring cable. |
| 95 | All as per item No. 92 above but point wiring for one 3 pin ,5 Amp socket point on the same board with other switch and 2.5sqmm wiring cable. |
| 96 | All as per item No. 92 above but point wiring for 15/16A socket outlet with 2.5 Sqmm wiring cable. |
| 97 | S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed. |
| 98 | S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed. |
| 99 | S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 100 | S&F socket outlet modular 6/16 Amp, 5/6 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 101 | S&F ceiling rose, surface backlit, three terminal complete all as specified and directed. |
| 102 | S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 103 | S&F modular fan step regulator 60/80W, 2 module complete all as specified and directed. |
| 104 | S&F modular bell push, 6Amp, 1 module complete all as specified and directed. |
| 105 | S&F call bell ding dong 230 Volt, Single Phase, complete all as specified and directed.Make Anchor/L&T/Havells Reo |
| 106 | S&F Tube light fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directedMake : Havells - Cat no LHEXAPP7PN1W020/ Bajaj - Beam Pro Batten 830412 Philips -Ujjwal/ slim line Batten 919515814053 / Orient - LBLN -18-C-SQ |
| 107 | S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.Make : Havells - Cat Part No LHEXBLP7IN1W009 or eqvt in bajaj cat part No BCLSB10WH/ CG Cat Part No LCTL-9-CDL |
| 108 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver, holder & connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make : Havells - cat no RUGBYGENXFTS10WLED865SSYMBOPC / Bajaj - BIBWP10WLED /Orient - LIBHP-10-C |
| 109 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300MM including taking down existing exhaust fans of any description, type and size including disconnection of electric connections and deposited to AGE E/M store yard complete all as specified and directed.Make : Havells Model -Thrill Air DX HS / Crompton: model- BRISK AIR NEO /equivalent make in bajaj / Philips |
| 110 | Disconnection all electric and water supply connections and taking down carefully existing electric water heater (Gyser) (any description and capacity), keep in safe custody or deposited to AGE E/M store yard as directed by Engg-in-charge and refixing in the same location or in other location as directed including making electrical and water supply connections before completion of work and necessary testing complete all as specified and directed.Note : For re - installation geyser , the contractor shall provide brand new PVC connections 450mm long ( 2 Nos), Fasteners 8mm dia and 100mm long (4 Nos) and 15 Amp plug top and cost of these items and other miner items required (like insulation tap, screws/ nails etc ) shall be deemed included in quoted unit Rates. |
| 111 | Disconnection all electric connections and taking down carefully existing exhaust fan (any description and capacity), keep in safe custody or deposited to AGE E/M store yard as directed by Engg-in-charge and refix in the same location or in other location as directed including making electrical connections before completion of work and necessary testing complete all as specified and directed.Note : For re - installation exhaust fan, the contractor shall provide brand new PVC flexible 1.0 Sqmm twin core cable of required length and cost of these items and other miner items required (like insulation tap, screws/ nails, nut. bolt, washers, locking pin etc shall be deemed included in quoted unit Rates. |
| 112 | Disconnection all electric connections and taking down carefully existing ceiling fan (any description and size and capacity), dismantling blades and deposited to AGE E/M store yard complete all as specified and directed. |
| 113 | S&F LED bulb 9/10 watt suitable for angle / batten holder fitting complete all as specified and directed.Make\\" havells/ Philips/Bajaj |
| 114 | Disconnection all electric connections and taking down carefully existing electric meter (any description and capacity), keep in safe custody or deposited to AGE E/M store yard as directed by Engg-in-charge and refix in the same location or in other location as directed including making electrical connections before completion of work and necessary testing complete all as specified and directed. |
| 115 | M&L surface sub main wiring with two single core 6.0 Sqmm PVC FRLSH insulated unsheathed stranded copper cable (Phase & neutral) and one single core cable of same description as continuous earth wire, drawn in & incl medium grade, ISI marked PVC conduit/ casing-n-caping of suitable size (not less than 20mm dia) with all accessories (such as tee, bend, joint cover, round / square blocks at junctions as required) complete all as specified and directed.Note: (i) Proper colour coding of wiring cables (as approved by Engg-in-charge) shall be used/ ensured(ii) Two runs of single core cable (Phase and neutral) and one run of single core cable (earth continuity conductor) & one run of PVC casing -n-capping/pvc conduit shall be measured as one unit length. |
| 116 | S&F MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 117 | S&F MCB SP 240 volt 63 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 118 | S&F MCB SPN 240 volt 40 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 119 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8way, 240 V with 200 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 120 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8way, 240 V with 200 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 26, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysOct 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender