Tender For Provision Of Toilets Near Bldg No.T-45 & T-60 At Palchan Under Age (I) R&D Manali.
Tender Value
7.77 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
17 days left
EMD
15540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Toilets Near Bldg No.T-45 & T-60 At Palchan Under Age (I) R&D Manali.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in Ordinary rock foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soilswithin a lead of 50m, complete all as specified and directed by Engineer-in-charge. |
| 2 | M&L for Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in the required thickness, for all leads & lifts, complete all as specified and directed by Engineer-in-charge. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), complete all as specified and directed by Engineer-in-charge. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), complete all as specified and directed by Engineer-in-charge. |
| 5 | M&L For Mild steel and Medium Tensile steel bars Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, complete all as specified and directed by Engineer-in-charge. |
| 6 | M&L For Mild steel and Medium Tensile steel bars Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete but above plinth level, complete all as specified and directed by Engineer-in-charge. |
| 7 | M & L for coursed rubble masonry with hard stone in foundation and plinth with Cement mortar 1:6, complete all as specified and directed by Engineer-in-charge. |
| 8 | Rendering 12mm thick cement plaster using Cement mortar 1:6 on stone masonry internal surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed by Engr-in-charge. |
| 9 | M&L for rendering 15mm thick cement plaster using Cement mortar 1:4 on stone masonry external surfaces or surface other than fair face of brick-work or on one side of lathing, complete all as specified and directed by Engineer-in-charge. |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, complete all as specified and directed by Engineer-in-charge. |
| 11 | Providing and laying rectified non-skid Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete all as specified and directed by Engineer-in-charge. |
| 12 | M&L for plain cement concrete 1:3:6 (1 Cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources), complete all as specified and directed by Engineer-in-charge. |
| 13 | Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with rubber mould type with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc., complete all as specified and directed by Engineer-in-charge. |
| 14 | M&L for structural steel work riveted, bolted or welded in built up sections, trusses and framed work for water tanks, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all as specified and directed by engineer in charge |
| 15 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 150 grams per sqm(AZ-150) as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, complete all as specified and directed by Engineer-in-charge. |
| 16 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) complete all as specified. |
| 17 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not lessthan 10kg/sqm), complete all as specified and directed by Engineer-in-charge. |
| 18 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete all as specified and directed by Engineer-in-charge. |
| 19 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-charge. |
| 20 | Providing and fixing IS : 12817 marked stainless steel butt hinges 100X 58X 1.90 mm with stainless steel screws etc., complete all as specified and directed by Engineer-in-charge. |
| 21 | Providing and fixing aluminium tower bolts, size 250x10 mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc., complete all as specified and directed by Engineer-in-charge. |
| 22 | Providing and fixing aluminium handles,size 125mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc., complete all as specified and directed by Engineer-in-charge. |
| 23 | Providing and fixing aluminium sliding door bolts, size 300x16 mm ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc., complete all as specified and directed by Engineer-in-charge. |
| 24 | Providing and fixing rectangular/cicular high density polyethylene 1000 lit water storage loft tank with cover, tripal layer ,conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately, complete all as specified and directed by Engineer-in-charge. |
| 25 | Providing and fixing 15mm bore C.P. brass long nose bib cock of approved quality conforming to IS:8931 :15 mm nominal dia, complete all as specified and directed by Engineer-in-charge. |
| 26 | Providing and fixing 15mm bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931, complete all as specified and directed by Engineer-in-charge. |
| 27 | Providing and fixing PN - 16 Pipe, 20mm OD (SDR-7.4)3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti- microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threadedpolypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints, complete all as specified and directed by Engineer-in-charge. |
| 28 | Providing and fixing PN - 16 Pipe, 25mm OD (SDR-7.4) 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti- microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threadedpolypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints, complete all as specified and directed by Engineer-in-charge. |
| 29 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes of 110mm diameter, complete all as specified and directed by Engineer-in-charge. |
| 30 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(i) Bend 75mm (87.5°), complete all as specified and directed by Engineer-in-charge. |
| 31 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid, complete all as specified and directed by Engineer-in-charge. |
| 32 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer, complete all as specified and directed by Engineer-in-charge. |
| 33 | Providing and fixing 32 mm dia Flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings, complete all as specified and directed by Engineer-in-charge. |
| 34 | Providing and fixing C.P. brass toilet paper holder, complete all as specified and directed by Engineer-in-charge. |
| 35 | S&F 110 mm PVC floor Traps ‘P’ or ‘S’ including jointing with solvent cement complete all as specified and directed. |
| 36 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length, complete all as specified and directed by Engineer-in-charge. |
| 37 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with 5 lit capacity automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 38 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, complete all as specified and directed by Engineer-in-charge. |
| 39 | M&L for 2nd class hard wood fillet square or rectangular in section clean sawn screwed with nails or beads of sectional area exc 13 Sqcm but not exc. 25 sqcm for frame work in ceiling, complete all as specified and directed by Engineer-in-charge. |
| 40 | M&L for 12 mm thick prelaminated particle board , interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling, complete all as specified and directed by Engineer-in-charge. |
| 41 | M&L for Painting new steel surfaces applying with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint complete all as specified. |
| 42 | M&L for preparing of new plastered or unplastered wall and ceiling distempering with 1st quality acrylic distemper two or more coats over and including water thinnable priming coat with cement primer (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour, complete all as specified and directed by Engineer-in-charge. |
| 43 | M&L for new plastered or unplastered surfaces finishing walls with Acrylic Smooth exterior paint of required shade two or more coat applied @ 1.67 ltr/10 sqm and incl necessary scaffolding, ladders, complete all as specified and directed by Engineer-in-charge. |
| 44 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5, complete all as specified and directed by Engineer-in-charge. |
| 45 | M&L for point wiring with 1.5 Sqmm (22/.3mm) PVC insulated and unsheatedd FRLS single core stranded copper conductor foe one light/fan and incl metallic rigid concealed conduit medium grade 19/20 dia to be terminated in pressed steel terminal boxes with top cover plate incl 1.5 sqmm (22.3 mm) PVC insulated and unsheathed FRLS Single core stranded copper earth continuity conductor controlled by one switch and/or one regulator complete incl repairing surfaces in Cm 1:3 and finishing the sutface as per existing treatment, complete all as specified and directed by Engr-in-charge. Note: Switches and regulators shell be measured and paid separatly and wiring shell be done as per colour code in IS Code) |
| 46 | S&F switch piano flush type 6 Amps SP one way, complete all as specified and directed by Engr-in-charge. |
| 47 | S&F ceiling rose surface Bakelite 65x25 mm two to three terminals, complete all as specified and directed by Engr-in-charge. |
| 48 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220v AC decorative type with deiver holder and LED lamp incl connecting up with three core flexible copper conductor cable of sutaible size, complete all as specified and directed by Engr-in-charge. |
| 49 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v, 50hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and directed by Engr-in-charge. |
| 50 | S&F for MCB SP 06 to 32 Amps 240 Volts, 10 KA, `C' curve, incl proper thimble connections and all as per site requirement and as directed by Engr-in-Charge. |
| 51 | S&F LED Bulk head fitting of 10 Watt, complete with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable of sutaible size, complete all as specified and directed by Engineer-In-Charge. |
| 52 | M&L for submain wiring along with earth wire with following sizes of FRLS is PVC insulated copper conductor, single core cable incl PVC Casing vaping/ Conduit pipe 2x4.0 Sq. mm +1x4.0 Sqmm earth with earth wire, complete all as specified and directed by Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender