Tender For Addition /Alteration Of Building No P-333 At Pratap Enclave Under Ge (South) Jaipur
Tender Value
9.52 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
10 days left
EMD
19040
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition /Alteration Of Building No P-333 At Pratap Enclave Under Ge (South) Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82588/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: ADDN/ALTN OF BLDG NO P-333 AT PRATAP ENCLAVE UNDER GE (SOUTH) JAIPUR CA NO: CWE/JPR(S)- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Excavation in trenches not exc 1.5m wide & not exc 1.5m in depth for foundation etc or manholes & getting out soft/loose soil complete all as specified and as directed |
| 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed |
| 4 | Removing excavated material n. exc 50m & depositing where directed at a level n.exc.1.5m above the starting point complete all as specified and as directed. |
| 5 | M&L for surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed. |
| 6 | M&L for Hard core, of broken stone/boulder broken to gauge n exc 63mm complete all as specified and as directed |
| 7 | M & L PCC 1:4:8 type E-2 (40mm graded stone aggt) as in foundation filling & mass concrete complete all as specified and directed |
| 8 | M & L 100mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) in sub base complete all as specified and as directed. |
| 9 | Damp proof course In cement concrete 1:2:4, type B-0 40mm thick to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed |
| 10 | M&L for RCC Type B1 1:2:4 (20mm graded stone aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 11 | Formwork to sides and soffits of lintels & beams including supports, overhangs, etc. with rough finished surface of concrete complete all as specified and as directed |
| 12 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 13 | S&F TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed |
| 14 | M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection and foot path etc. finished even and fair without using extra cement including necessary form work of edge all as specified and directed. Note:- 10mm wide and 75mm deep joints shall be made at 3 mtr interval and at each corner the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3 complete all as specified and as directed. |
| 15 | Demolition of stone/brick masonary built in cement mortar or cement lime mortar complete all as specified. |
| 16 | M&L for brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified. |
| 17 | M&L for rendering 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified. |
| 18 | M&L for rendering 15mm thick in cement mortar (1:6) on any face of stone masonry walls or concrete surfaces, finished even and smooth complete all as specified and as directed. |
| 19 | M&L for preparation of newly plastered surfaces of walls and applying two coats of anti-fungal exterior acrylic emulsion paint over a coat of primer including preparation of surfaces complete all as specified and as directed. |
| 20 | M&L for preparation of newly palstered surface of wall and applying 2mm thick putty in two coats to make the entire surface free from undulations and finally applying two coats of oil bound distemper complete all as specified and directed |
| 21 | M&L for complete removal of existing treatment and applying 1 mm thick birla wall care putty on wall putty to make the entire surface free from undulations and finally applying two coats of oil bound distemper complete all as specified and directed. |
| 22 | Providing cement concrete 1:2:4 type C1 (20mm graded stone agg) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, ier aps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces,E28 including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed by EIC |
| 23 | M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and as directed. |
| 24 | M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick rendering in cement mortor 1:4 complete all as specified and directed. |
| 25 | M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 26 | M&L Glazed ceramic tiles in vertical surfaces of size 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 27 | M&L Non skid ceramic joint free coloured tiles 7-8 mm thick (square or rectangular)area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 28 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame(88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)(A) Area not exceeding 2.00 sqm each |
| 29 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) (A) Area not exceeding 1.00 sqm each |
| 30 | S&F 4.8mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, or in aluminium window/door in squares exc 0.50 Sqm in each pane complete all as specified. |
| 31 | S&F 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutters, kitchen cabinet/ cup board /partition wall/ wall cabinet incuding lipping to exposed surfaces with PVC strip as provided by manufacturer complete all as specified and directed.Make : Raj shree or equivalent as approved by GE |
| 32 | S&F in repair stainless steel soft close auto hinge bright finish (Auto close concealed hinges) suitable for 18 to 20 mm thick shutter in any position complete all as specified. |
| 33 | S&F in repair 125 mm dia oval shape SS handle fancy type bright finish or as approved complete all as specified and as directed. |
| 34 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; making bracket with angles railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including necessary welding complete all as specified and as directed. |
| 35 | S&F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (Die cast) body complete all as specified and as directed. |
| 36 | Taking down door chowkhat or frame exe 1.5 sqm but n exc 4 sqm (without taking off shutter from the frames) complete all as specified and as directed |
| 37 | S&F 40 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed. |
| 38 | S& F Stainless steel sliding door bolt with hasp and staple and fixing clips of sheet , with necessary fixing bolts of requiered Nos and sliding bolts of extruded sections and length of bolt 300 mm complete all as specified and as directed. |
| 39 | S & F fancy type Stainless steel handles, fabricated type, size of handle 200 mm complete all as specified and as directed |
| 40 | S&F stainlees steel tower bolt of 200mm long barrel tower bolts of extruded section, complete all as specfied and as directed. |
| 41 | S&F 100mm in size stainless steel Butt hinges with mild steel hinge pin complete all as specified and directed |
| 42 | S&F Rotational moulded polyethylene 1000 liters water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20 mm ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including dismantling old unserviceable water tanks and removing to store complete all as specified and as directed. |
| 43 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc including taking down of existing pipe complete all as specified and as directed. |
| 44 | S&F in repair PVC (SWR) bend of 110 mm bore provided with access door complete all as specified and as directed. |
| 45 | S & F steel water tubes, 15mm bore medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and as directed. |
| 46 | S & F steel water tube 20mm bore, med grade galvanized with all fittings and fixed to walls and ceiling or laid in trenches complete all as specified and as directed. |
| 47 | S&F Gun metal globe or gate valve with iron wheel head , screwed both ends for iron pipe and fixed,bore dia of pipe 20 mm , fixed in repairs complete all as specified and as directed |
| 48 | M&L for 100mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and as directed |
| 49 | Supply and fixed in repairs fancy type chromium plated angle cock 15mm bore cast coper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 50 | Supply and fixed in repairs 15 mm bore chromium plated central Hole Basin Mixer with Regular Spout without Popup Waste System with 450mm Long Braided Hoses, 20mm Cartridge size etc with all accessories as provided by manufacturer complete all as speciifed and as directed. |
| 51 | Supply and fixed in repairs 15 mm bore Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges etc as per manufacturer complete all as specified and as directed. |
| 52 | Supply and fixed in repair fancy type long body CP bib cock 15mm bore with crutch or butterfly handle as approved complete all as specified and directed. |
| 53 | Supply and fixed in repair chromium plated fancy type two way bib cock 15mm bore with crutch handle as approved complete all as specified and directed. |
| 54 | S&F in repairs chromium plated overhead shower of size 150mm x 150mm Square Stainless Steel Silver Wall Mount with all accessories as per manufacturers instruction complete all as specified and as directed. |
| 55 | S&F in repair Toilet paper holder with chromium plated screws complete all as specified and as directed. |
| 56 | S&F in repair CP single towel rail 600 mm long with chromium plated screws complete all as specified and as directed. |
| 57 | S&F in repair Soap dish with chromium plated screws complete all as specified and as directed. |
| 58 | S & F in repair for chromium plated hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and as directed. |
| 59 | S & F in repair Corner glass shelf (with bracket) complete all as specified and as directed |
| 60 | S & F in repair CP towel ring round with chromium plated screws complete all as specified. |
| 61 | S&F in repairs white rimless single piece-EWC with UF soft close slim seat cover, Hinges, including S trap and fixing all accessories as given with manufacturers complete all as specified and as directed. |
| 62 | S&F in repairs counter top oval wash hand basin vitreous china white (flat back) of size 545 X 545 X 180 mm including all fittings complete all as specified and as directed. |
| 63 | S&F in repairs CP grating 100 mm dia round with or without waste hole fixed on floor/nahani trap with white or coloured cement complete all as specified and as directed. |
| 64 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and as directed. |
| 65 | M&L Double Wall Corrugated (DWC) HDPE pipes in trenches & jointed as specified of 150mm dia complete all as specified and as directed. |
| 66 | S&F 50mm thick PUF (polyurethane Foam) indulated sandwich panel with pre-coated GI sheet not less that 0.5mm thick on both sides , having a total density of not less that 40 Kg per cubic meter, including all necessary fixing arrangement complete all as specified and directed. |
| 67 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (GdeE- 250) quality Acomplete all as specified and as directed. |
| 68 | M&L for preparation of new steel surfaces over 10 cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed. |
| 69 | M&L for applying smartcare Hydroloc damp proof in two coats over old or newly plastered surfaces including preparation of surfaces for treating dampness and efflorescence as per manufacturer's instruction complete all as specified and as directed. |
| 70 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed over 25 mm thick sand cushoning all as directed by Engineer-in-Charge. |
| 71 | Providing and fixing suspended false ceiling ORCAL extra microperforation size 600 x 600 x 15mm ceiling tiles over suspension metal system (MICRO LOOK) designer grid (15mm grid 8mm return) SILHOUETTE X L 15mm (NOMINAL) complete including necessary hanging system arrangement as per manufactures instruction which is required to be made from existing RCC roof/stone slab of building complete all as directed by Engineer-in-Charge. |
| 72 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 73 | M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit, medium grade, not less than 20 mm dia, ISI marked, ivory colour, with all conduit fittings / fixing accessories and terminated in modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one light / fan / bell point controlled by one switch, complete all as specified and as directed.Note :(i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of modular metal flush box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate. |
| 74 | M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit, medium grade, not less than 20 mm dia, ISI marked, ivory colour, with all conduit fittings / fixing accessories and terminated in modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 Pin socket outlet 06 Amps on the same board with other switches, complete all as specified and as directed. Note :-(i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate. |
| 75 | M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit, medium grade, not less than 20 mm dia, ISI marked, ivory colour, with all conduit fittings / fixing accessories and terminated in modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 Pin socket outlet 06 Amps on the independent board, complete all as specified and as directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of modular metal flush box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate. |
| 76 | M&L for point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 4.0 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit medium grade not less than 25 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in MS Sunken box / modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for 3 Pin 15 Amps socket outlet on independent board, complete all as specified and directed.Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate. |
| 77 | S&F Modular Switch one way 6 A, 1 module complete all as specified and directed. |
| 78 | S&F Modular Socket, 6A - 2/3 pin combined, 2 module complete all as specified and directed. |
| 79 | S&F modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 80 | S&F modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 81 | S&F fan step regulator, 120W - 2 module complete all as specified and directed. |
| 82 | S&F ceiling rose 3 phase, PVC / polycarbonate, isolated body complete all as specified and directed. |
| 83 | M&L for sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed FRLSH copper cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit / casing capping not less than 25mm and conduit accessories fixed in wall including provision of 1 Run of 6 Sqmm PVC insulated unsheathed FRLSH cable with multistranded copper conductor as earth continuity complete all as specified and directed. Note : 02 Run of 06 Sqmm copper wire and 01 Run of 06 Sqmm copper earth wire along with PVC conduct shall be measured as one unit. |
| 84 | S&F 25 A modular starter switch combined 2 module with ON/OFF push button and indicator complete all as specified and directed. |
| 85 | S&F in repair sheet metal enclosure factory fabricated for MCB distribution board SPN double door type concealed in wall 240 Volt 8 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed. |
| 86 | S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and 06 to 32 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed. |
| 87 | S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 88 | S&F in repair LED fixtures 20 Watt with extruded polycarbonate, environmental friendly, slim design with decorative and caps, high performance diffuser for soft & glare free light, minimum lumen output 1900 lm with efficacy 110 lm/w, driver with high voltage protection upto 380 V AC & surge protection upto 2.5 KV, CCT(K)-6500, LM 80 tested high brightness LED technology complete all as specified and directed. |
| 89 | S&F in repair LED fixtures 10 Watt with extruded polycarbonate, environmental friendly, slim design with decorative and caps, high performance diffuser for soft & glare free light, minimum lumen output 1900 lm with efficacy 110 lm/w, driver with high voltage protection upto 380 V AC & surge protection upto 2.5 KV, CCT(K)-6500, LM 80 tested high brightness LED technology complete all as specified and directed. |
| 90 | S&F exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep of size 200/250mm complete all as specified and directed. |
| 91 | M&L in repair for LED light fitting 9W / 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 92 | Supply, installing ,testing and commissioning Stationary storage type electric water heater( geyser) 25 ltr capacity BEE 4 star rating inbuilt current leakage protection device, multifunction safety valve, high precision thermostat control,Preset thermal output, high working pressure 0.8 MPa,vertical mounting including min 2 yrs warranty. |
| 93 | S&F ceiling fan type 1200 mm sweep 50 Hz AC 230 volts, complete with blades, down roads, electronic regulator(Remote) and other accessories. Min air delivery 210 CFM with service value 6.00 BEE , 5 star rated with brushless direct current motor(BLDC). |
| 94 | S&F LED mirror light adjustable type 12 watt, 230 volt single phase 6500/3000K complete all as specified and directed. |
| 95 | Supply and fixing in replacement 10 watts wall mounted LED decorative luminary with standard accessories and lamp inclduing fixing the same with existing wall completed all as specified and directed |
| 96 | Supply & fix Air Circulator (wall fan) fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified by Engr in charge. |
| 97 | Schedule of Credit Total in Figures 0.0 0.0 -6722.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Six Thousand Seven Hundred & Twenty Two Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender