Tender For Special Repair To Ghd Building At Subalaya_Building
Tender Value
3.83 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
11 days left
EMD
4230
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nayagarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Ghd Building At Subalaya_Building
BOQ
| Sl. No. | Item Description |
| 1 | Dismentaling Brick/ Stone masonary in lime or cement mortar under 3mtr height including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete in all respect as per the specification & direction of the Engineer-in-Charge. |
| 2 | Earthwork in excavation of foundation in hard soil including dressing and levelling the bed up to the required depth & removing the excavated earth & depositing the same away from the work site within initial lead of 50 mtr & initial lift of 1.5 mtr, including cost of labour T&P articles required for the work including shoring, shuttering, propping & dewatering if required, etc. complete in all respect as per the specification & direction of the Engineer-in-Charge. |
| 3 | Supplying and filling in foundation & plinth with sand in 23.5 cm (9\\") thick layers including watering and ramming with cost, conveyance, royality taxes of all materials, and labour with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. |
| 4 | Providing Cement Concrete (1:3:6) with 40mm size crusher broken granite metal of approved quality from approved quarry including hoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance taxes royality, labour of all materials, with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge |
| 5 | Fly ash brick masonary in Cement Mortar (1:6) in Foundation using Fly ash brick of 25 cm X 12 cm X 8 cm size having a crushing strength not less than 75kg per Sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge |
| 6 | Fly ash brick masonary in Cement Mortar (1:6) in Superstrcuture using Fly ash brick of 25 cm X 12 cm X 8 cm size having a crushing strength not less than 75kg per Sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge |
| 7 | RCC work of grade M-20 having a minimum compressive strength in work test of 200Kg/cm2 in 15cm cubes at 28days after mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where necessary including cost, conveyance, taxes and royalties of all materials and labour required for the work etc, complete with all T&P and cess in all respect but execluding cost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. Column Base |
| 8 | Column and Beam |
| 9 | Lintel |
| 10 | Chhaja |
| 11 | Roof Slab |
| 12 | Providing and supplying of HYSD bars confirming to approved grade including straightening cutting bending bindiing lapping , welding etc confirming to ISI specification) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design placing the grills in position including cost & conveyance of tor steel & binding wires of 18 to 20 guage including cess etc complete as per the specifiction and direction of Engineer-in- charge |
| 13 | 12mm thick cement plaster in cement mortar (1:4) finished smooth to brick walls after racking out joints including watering and curing with cost, conveyance, royalty of all materials with cost of all labour, T&P etc. required for the work complete as per the specification and direction of the Engineer-in-charge. |
| 14 | 16mm thick cement plaster in C.M. (1:4) finished smooth to inside surface of 9\\" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all taxes, royalties & cess etc, complete in all floor as per direction of Engineer-in-charge. |
| 15 | 20mm thick grading plaster in cement mortar (1:4) with water proofing compound over R.C.C. roof slab laid to proper slope finished smooth including watering and curing with cost, conveyance, royalty of all materials, labour charges, T&P etc. required for the work complete as per the specification and direction of the Engineer-in-charge. |
| 16 | Supplying,fitting and fixing of M.S. window grill & iron grill gate made out of (35x35x5)mm size angular frame with square bar M.S. flat for grills of approved design including cost, conveyance,royalty of all materials, labour charges T&P etc. required for the work complete including iron fittings as per the specification and direction of the Engineer-in-charge. |
| 17 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures etc. complete including cost of all labours, materials, conveyance, hardware fitting etc all complete as per direction of the Engineer-In-Charge. |
| 18 | Wall painting two coats with plastic Emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge. |
| 19 | Painting two coats with approved weather seal coat over new work includinjg cost and conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 20 | Painting two coats over a coat of priming to new wood and iron work using approved quality of Enamel paint and Red oxide primer including sand papering & polishing the surface with cost, conveyance, royalty of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 21 | Providing and fixing Vetrified floor tiles fixing in floors treads (or) steps and landing on 25 mm thick bed of C.M (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including polishing complete including cost of tiles watering & curing for 7 days with cost, conveyance, royalties, taxes of all materials & labour T&P and cess required for the work etc, complete in all respect with surface finishing with polishing materials as directed by Engineer-In-Charge. |
| 22 | Providing fitting & fixing vitrified tiles in dadoos skriting and rises of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including polishing complete including cost of pre cast tiles watering & curing for 7 days with cost conveyance royalty and taxes of all materials & labour T&P with cess required for the work etc, complete in all respect and surface finishing with polishing materials as directed by the Engineer-in-charge. |
| 23 | Providing fitting Fixing Chequered tiles in all floors of approved make on on 25mm thick bed of cement morter (1:1) with neat cement slurry jointing with white cement including cost of pigment & painting with approved paint including all cost convenyance taxes labour T&P etc complete as directed by the Engineer-incharge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender