Tender For Ghd Building At Khalamada_Building
Tender Value
5.04 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
1 days left
EMD
5080
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nayagarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Ghd Building At Khalamada_Building
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth asper direction of the Engineer-in-charge |
| 2 | Supplying and filling in foundation & plinth with sand in 23.5 cm (9\\") thick layers including watering and ramming with cost, conveyance, royality taxes of all materials, and labour with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. |
| 3 | Providing Cement Concrete (1:3:6) with 40mm size crusher broken granite metal of approved quality from approved quarry including hoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance taxes royality, labour of all materials, with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge |
| 4 | Fly ash brick masonary in Cement Mortar (1:6) in Foundation using Fly ash brick of 25 cm X 12 cm X 8 cm size having a crushing strength not less than 75kg per Sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge |
| 5 | Fly ash brick masonary in Cement Mortar (1:6) in Superstrcuture using Fly ash brick of 25 cm X 12 cm X 8 cm size having a crushing strength not less than 75kg per Sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge |
| 6 | RCC work of grade M-20 having a minimum compressive strength in work test of 200Kg/cm2 in 15cm cubes at 28days after mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where necessary including cost, conveyance, taxes and royalties of all materials and labour required for the work etc, complete with all T&P and cess in all respect but execluding cost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. Column Base |
| 7 | Column upto plinth |
| 8 | Providing and supplying of HYSD bars confirming to approved grade including straightening cutting bending bindiing lapping , welding etc confirming to ISI specification) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design placing the grills in position including cost & conveyance of tor steel & binding wires of 18 to 20 guage including cess etc complete as per the specifiction and direction of Engineer-in- charge |
| 9 | 2.5cm (1\\") Damp proof course with cement concrete (1:2:4) using 12mm size crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying & compacting concrete etc, watering curing cost & conveyance of all materials & taxes & royalties etc with all labour T&P required for the work including cess etc complete including side shuttering in all respects as per the direction of Engineer-In-Charge. |
| 10 | Cement concrete of proportion (1:2:4) using 12mm (1/2\\") size clean crusher broken grantie chips of approved quality from approved quarry including hoisting lowering and levelling in position to required level including frame work where necessary ramming and levelling cruing dewatering with cost conveyance taxes and royalties labour of all materials including hire and running charges of machineries T&P required for the work with cess etc, complete as per specification and direction of Engineer-in-charge. |
| 11 | Providing fitting fixing in position M.S. Iron work of truss including cost of welding,cutting,bolting of required, including cost, conveyance taxes of all materials and labour with T&P with cess etc required for hoisting the joists & trusses & placing in position etc complete as per direction of E.I.C |
| 12 | Supplying fitting & fixing of G.C.I sheet in roof drilling holes in wind ties including fixing of ridges valleys wind ties with all T&P etc complete including cost of fittings and all materials, labour,with T & P,CESS etc required for the work complete as per direction of Engineer-in-Charge. |
| 13 | 12mm (1/2\\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur with T&P required for the work with all taxes, royalties & cess etc, complete in all floors as per direction of Engineer-in-charge. |
| 14 | Finishing wall surface two coats with any approved weather coat over a coat of wall primer to outer wall surface after celaning surface including cost of paint and primer watering curing with cost conveyance and taxes of all materials and labour with T&P and Cess required for the work etc, complete in all respect as per the direction of Engineer-in-Charge. |
| 15 | Wall painting two coats with plastic Emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge. |
| 16 | Painting two coats over a coat of priming to new wood and iron work using approved quality of Enamel paint and Red oxide primer including sand papering & polishing the surface with cost, conveyance, royalty of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 17 | Providing and fixing Vetrified floor tiles fixing in floors treads (or) steps and landing on 25 mm thick bed of C.M (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including polishing complete including cost of tiles watering & curing for 7 days with cost, conveyance, royalties, taxes of all materials & labour T&P and cess required for the work etc, complete in all respect with surface finishing with polishing materials as directed by Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender