Tender For Special Repair To Jcos / Or Md Accdn Bldg No. P - 421 (06 Qtrs) & P - 422 (03 Qtrs) 10 Dogra Under Ge Dehradun
Tender Value
61.41 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
0 days left
EMD
1.17 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Jcos / Or Md Accdn Bldg No. P - 421 (06 Qtrs) & P - 422 (03 Qtrs) 10 Dogra Under Ge Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed. |
| 2 | M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified and directed. |
| 3 | All as per item No 02 above but except bricks. (Old bricks obtained from demolition shall be reused) |
| 4 | M&L for brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including all quoins, arches, pillars etc. complete. |
| 5 | Taking down cement or cement lime plaster/tile work on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified. |
| 6 | M&L for 5 mm thick plastering on ceiling surfaces in CM (1:4) even and smooth without using extra cement complete all as specified & directed. |
| 7 | M & L for rendering 15 mm thick on cement mortar 1:6 finished fair/ unfair faces of brick work finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M & L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on fair/ unfair faces of brick/ concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: WPC will be measured and paid separately under respective item of this schedule. |
| 9 | Supply only liquid water proofing compound (Dr Fixit or equivalent) @ 0.20 ml per bags of cement complete all as specified and directed. |
| 10 | M&L for applying interior grade wall care putty 1 to 1.50 mm thick to make the surface smooth all as specified and directed. |
| 11 | M&L for applying exterior grade wall care putty 1 to 1.50 mm thick to make the surface smooth all as specified and directed. |
| 12 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered or putty surface including preparation of surface complete all as specified and directed . |
| 13 | M&L for applying two coats of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. |
| 14 | M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed. |
| 15 | M & L for preparing plastered or unplastred old decorated surfaces of ceiling and applying one coats of white wash complete all as specified and directed. |
| 16 | M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded aggregate as in flooring, finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M & L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregates as in padding on chajja, benching and etc including necessary scaffolding and formwork complete all as specified and directed. |
| 18 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in coping, benching, anchorage blocks, lintels upto 1.5m clear span, cills, steps, sesmic & other similar bands, plinth course, lacing course, parapets & ralling upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs not provided for water trought & the like including weathering, slightly rounded or chemfered angels & throating as directed and specified. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed. |
| 20 | S&F non-skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces laid over including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 21 | S&F non-skid coloured ceremic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 22 | M&L for rendering 10 mm thick in cm 1:4 for dado & skirting on brick/concrete wall surface finished fair and even for receiving tiles in vertical surfaces complete all as specified and directed. |
| 23 | M &L for glazed ceramic tiles coloured, of size 300 mm x 450 mm x 7 mm thick approved 1st quality as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. |
| 24 | M&L for 20mm thick Machine cut kota stone slab flooring laid over and including 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and mirror polishing complete all as specified and as directed. Note: Size of Kota stone shall not be less than 550 mm x 550 mm. |
| 25 | M& L for Kota stone slab 16-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 26 | Demolition of stone slab and tiles and laid bedded in any mortar of any description in floors, apron, etc. complete all as specified and as directed. |
| 27 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 28 | M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement incl demolition of old existing in concrete ground floor and paving below or above ground level complete all as specified and directed. |
| 29 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed. |
| 30 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed. |
| 31 | M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed. |
| 32 | S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed. |
| 33 | S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed. |
| 34 | S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.. Make : Hindware/Parryware/Jaquar. |
| 35 | S&F PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed. |
| 36 | S&F CP bib tap short body fancy type cast copper alloy 15 mm bore screwed down with crutch or butterfly handle for iron pipe or for brass ferrule complete all as specified and directed. |
| 37 | S&F fancy type concealed stop valve, cast copper alloy, with crutch or butterfly handle, screwed down both ends for high pressure, as per ISI suitable for 15 mm dia iron pipe complete all as specified and directed. |
| 38 | S&F in repairs CP brass fancy type Angle cock 15 mm dia ISI mark complete all as specified and directed. |
| 39 | S&F CP brass shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed. |
| 40 | S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe including 600 mm PVC 'P' trap complete all as specified and directed. |
| 41 | Demolition of reinforced cement concrete, of any description complete all as specified and directed. |
| 42 | Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces complete all as specified and as directed. |
| 43 | M & L for RCC (1:2:4) (using 20 mm graded stone aggregate) as in slabs supported on wall, beam and columns in floors,roof slabs, shelves and cover slab Including demolition of existing old RCC complete all as specified and as directed. |
| 44 | S & F mild steel TMT bar 8mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 45 | Taking down chowkat with shutter area exc 1.5 sq.m but n.exc 4 Sqm each complete all as specified and directed. |
| 46 | Taking down chowkat with shutter area n.exc 1.5 sqm each complete all as specified and directed. |
| 47 | Taking down shutter only area exc 1.0 sq.m but n.exc 2.00 sqm complete all as specified and directed. |
| 48 | Taking down shutter only area exc 1.0 sq.m but n.exc 2.00 sqm and refixing in the same opening after necessary easing and repair complete all as specified and directed. |
| 49 | M&L cutting holes in brick wall built in cement mortar exc half brick but nexc one brick for inserting hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 50 | S&F Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including filling of frame in cement concrete1:3:6 type C-0 ( 12.5 mm stone aggregate) complete all as specified and directed. |
| 51 | M&L 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed. |
| 52 | S&F 35m thick factory made IInd class hard wood (Shisham) glazed and skeleton shutter open rebated and prepared to receive glass/ gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads or clearing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) complete all as specified and directed. |
| 53 | S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed. |
| 54 | S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. |
| 55 | S&F factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old window complete all as specified and directed. |
| 56 | S&F factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old window complete all as specified and directed. Please Enable Macros to View BoQ information |
| 57 | S&F factory made steel window made out of steel square/rectangular hollow section including MS hinges, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old window complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender