Tender For General-Rm 2026-27- Rc-2 -One Year Rc/Kozhencherry Section/Pathanamthiita-One Year Running Contract For Various Pwd Roads Under Kozhencherry Roads Section In Pathanamthitta District, 9 Road Stretches For A Length Of 30.132 Km-General Civil
Tender Value
38.54 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
6 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathanamthitta → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Rm 2026-27- Rc-2 -One Year Rc/Kozhencherry Section/Pathanamthiita-One Year Running Contract For Various Pwd Roads Under Kozhencherry Roads Section In Pathanamthitta District, 9 Road Stretches For A Length Of 30.132 Km-General Civil Work-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Appendix-A-Reactive Maintenance / Initial rectification work. |
| 2 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 3 | 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) |
| 4 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 5 | 55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface. |
| 6 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 7 | OD5002/2026-2027:Mix Seal Surfacing: Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and nishing to required level and grades as per Technical Specication Clause 509 of MORD.(Total usage of bitumen is 22.00kg/10m2) :-By Manual Means |
| 8 | 10.2:Maintenance of Earthen Shoulder (filling with fresh soil) Making up the loss of material/ irregularities on the shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment. |
| 9 | Appendix-B- Pre-monsoon works |
| 10 | OD4989/2026-2027:Engaging man mazdoor for clearing chocked culvert, clearing vegetation, removing the RCC slab and cleaning drain etc. |
| 11 | OD4986/2026-2027:Engaging JCB for removal of wastage, eviction purpose etc. |
| 12 | OD4982/2026-2027:Engaging tipper for conveying waste and debris |
| 13 | OD4990/2026-2027:Engaging concrete cutting machine for removing concrete structure and unauthorized constructions. |
| 14 | OD4980/2026-2027:Engaging wood cutter for cutting trees and branches standing in dangerous condition |
| 15 | OD4984/2026-2027:Hire charge for machine saw including petrol charge |
| 16 | OD4988/2026-2027:Engaging Man mazdoor for assisting wood cutter and removing branches of trees, Cutting in shape for keeping road side with out hindrance to the traffic as per the direction of deptl. officers at site. |
| 17 | OD4991/2026-2027:Hire Charges of rope for cutting trees standing in dangerous condition. |
| 18 | OD4981/2026-2027:Engaging Auto pickup for filling up of pot holes using shelmac |
| 19 | OD4978/2026-2027:Engaging Man mazdoor for filling up of pot holes using shelmac |
| 20 | OD4977/2026-2027:Supplying and stacking Shelmac or equivalent ready mix 25 Kg (1 Bag ) cold mix bags an instant pothole filling mixture from authorizes agencies as per indents, including conveying and unloading . |
| 21 | 2.2:Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area |
| 22 | 2.3.2.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Mechanical Means |
| 23 | 12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer |
| 24 | 12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications |
| 25 | 55.25:Lifting, conveying and fixing the newly casted RCC covering slabs of any thickness on top of drain in position including all labour charges and miscellaneous expenses etc complete |
| 26 | 12.8.A.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15 |
| 27 | OD4987/2026-2027:Random Rubble Masonry (Coursed/uncoursed in Cement mortar 1:6 including all cost, conveyance etc complete as per approved drawing and direction of departmental officers in charge |
| 28 | OD4983/2026-2027:Dry Rubble masonry for foundation and super structure of retaining wall including all cost as per design and drawings. |
| 29 | 55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete. |
| 30 | OD19968/2026-2027:Removing the old existing Vinyl sticker works on the display board of running contract and replacing with new vinyl sticker, including lettering, symbols and transporting to site, fixing on boards as per direction of the Engineer. |
| 31 | OD25536/2026-2027:Gratings (Steel work welded in built up sections/ framed work, including cutting, hoisting.fixing in position and applying a priming coat of approved steel primer using structural steeletc. as required in grating, frames, guard bar, ladder, railings, brackets, gates and similar works) |
| 32 | Appendix-C-Proactive/Preventive Maintenance |
| 33 | 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. |
| 34 | 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) |
| 35 | 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. |
| 36 | 55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface. |
| 37 | 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 38 | OD4998/2026-2027:Mix Seal Surfacing: Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and nishing to required level and grades as per Technical Specication Clause 509 of MORD.(Total usage of bitumen is 22.00kg/10m2) :-By Manual Means |
| 39 | OD4997/2026-2027:Engaging labour with passenger car not less than 1000 cc for Conducting and reporting routine inspection for 20 Km for the entire length of project road at a frequency of 7 days through out the agreement period of running contract as directed by Departmental officers. |
| 40 | 8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes. |
| 41 | OD4999/2026-2027:Engaging JCB for removal of wastage, eviction purpose etc. |
| 42 | OD5000/2026-2027:Engaging man mazdoor for clearing drains and culverts |
| 43 | 8.4.12:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminum sheeting, 2 mm thick/aluminum composite material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 50cmx 60 cm rectangular (Single chevron etc.) |
| 44 | 55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.300 mm x 900 mm |
| 45 | Appendix-D-Emergency Works |
| 46 | OD4993/2026-2027:Engaging JCB for removal of wastage, eviction purpose etc. |
| 47 | OD4994/2026-2027:Engaging man mazdoor for clearing chocked culvert, clearing vegetation, removing the RCC slab and cleaning drain etc. |
| 48 | OD4996/2026-2027:Engaging Tipper 5.5 cum capacity for the conveying the silt removed |
| 49 | OD4995/2026-2027:Engaging wood cutter for cutting trees and branches standing in dangerous condition |
| 50 | OD4992/2026-2027:Hire charge for machine saw including petrol charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender