Tender For Repair/ Renovation Of Toilets At Various Locations/ Bldgs And Modification Of Existing Room Into Hydraulic Lab In Annexe Building Of Airwing At annual rate contract Sarsawa Under Ge (Af) Sarsawa
Tender Value
34.28 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
5 days left
EMD
68600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Renovation Of Toilets At Various Locations/ Bldgs And Modification Of Existing Room Into Hydraulic Lab In Annexe Building Of Airwing At annual rate contract Sarsawa Under Ge (Af) Sarsawa
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced cement concrete as in cover/slab, etc all a specified & directed by Engineer-in-Charge. |
| 2 | M&L for reinforcedcement concrete nominal mix Type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in slab supported on walls or beamsand cloums in floor roofs , landing etc complete all as specified & directed. |
| 3 | Form work to soffits of suspended slabs and similar works not exc. 200mm thick surfaces of concrete. |
| 4 | Form work to edges of concrete flats,sides of RCC/PCC bands & similar works, not exc. 20cm wide of concrete. |
| 5 | S&F mild steel TMT bars 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipscomplete all as specified & directed. |
| 6 | S&F mild steel TMT bars 5 mm dia & over upto 10 mm as in stirrups, cut to length bent to shape required, including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified. |
| 7 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed by Engr-in-Charge. |
| 8 | M & L brick work sub class 'B' bricks (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 9 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed. |
| 10 | M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified. |
| 11 | M&L for rendering 15mm thick in CM (1:4) on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) all as specified. |
| 12 | M&L rendering 5mm thick in cement mortar (1:3) on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified. |
| 13 | Material and labour for preparation of new plastered surfaces of walls apply two coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including priming coat a primer applied @ 0.90 litre/ 10 sqm on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make: Asian Paints Royal (10 years product warranty) or Nerolac (10 years product warranty)/ Berger (10 years product warranty) at any height incuding necessary scaffolding. |
| 14 | Material and labour for preparation of complete removal of existing surfaces of walls apply two or more coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification at any height incuding necessary scaffolding. Note: Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make: Asian Paints Royal (10 years product warranty) or Nerolac (10 years product warranty)/ Berger (10 years product warranty) at any height incuding necessary scaffolding. |
| 15 | Material and labour for preparation of new plastered surfaces of Ceiling apply two coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including priming coat a primer applied @ 0.90 litre/ 10 sqm on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note: Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make: Asian Paints Royal (10 years product warranty) or Nerolac (10 years product warranty)/ Berger (10 years product warranty) at any height incuding necessary scaffolding. |
| 16 | Material and labour for preparation of old plastered surfaces of Ceiling apply one coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including priming coat a primer applied @ 0.90 litre/ 10 sqm on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note: Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make: Asian Paints Royal (10 years product warranty) or Nerolac (10 years product warranty)/ Berger (10 years product warranty) at any height incuding necessary scaffolding. |
| 17 | Material & Labour for preparation of new plastered surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces.Note: (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). Make: Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding. |
| 18 | Material & Labour for preparation of complete removal of existing surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed at any height incuding necessary scaffolding over new/complete removal surfaces.Note: (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). Make : Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding. |
| 19 | Material and labour for exterior or interior waterproof/weather proof cement based 1 mm thick putty @ 1 Kg(undiluted) per sq mtr. on new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:-Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. |
| 20 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 21 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre and not exceeding 04 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 22 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam sheet instead of Wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 23 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam both side PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, stile & rails feathered at edges, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 24 | M&L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for preparing of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified. |
| 26 | M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces. |
| 27 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/walls in PCC (1:2:4) type B-0 to match the existing floors/walls. |
| 28 | S&F for 18/19mm thick High Density High Moisture Resistant board (HDHMR) Prelaminated both sides as in Controller's Desk ,palmed boxes,showcase,shutters of Cup Boards etc including 6mm designing teak wood beading on edges complete all as specified and as directed by Engr-in-Charge. |
| 29 | S&F 75mm extruded brass handles, fabricated type polished complete all as specified & directed by Engr-in-Charge. |
| 30 | S & F Width of flaps (when open) 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed by Engr-in-Charge. |
| 31 | S&F FAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for for Wadrobe, Cupboard and Almirah Door. (SS MAT) with Mounting Screw complete all as specified |
| 32 | Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws all as specified. |
| 33 | S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed. |
| 34 | S&F aluminium anodised barrel tower bolt 200mm size extruded section, ISI marked & fixed complete all as specified and directed. |
| 35 | S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked complete all as specified and directed. |
| 36 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified. |
| 37 | S&F anodized aluminium frame with power coating (minimum thickness 50 micron) and other sections for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed. |
| 38 | S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed. |
| 39 | S&F door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width aand weight between 36 to 60 Kg and fixed complete all as specified & directed. |
| 40 | S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as directed |
| 41 | S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. |
| 42 | Supply only 5mm thick Froasted glass in squares n exc 0.5 sq. m each pane all as specified and directed by Engr-in-Charge |
| 43 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed |
| 44 | S&F anodized aluminium grill with power coating (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement & directed by Engr-in-Charge. |
| 45 | Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 46 | Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 47 | S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified and directed. |
| 48 | S&F steel tubing medium grade 20mm bore Medium grade fix to wall/floor fixed complete all as specified and directed. |
| 49 | S&F in repairs vitreous china wash down water closet pan one pice (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. |
| 50 | S&F as in repair vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. |
| 51 | S&F as in repair vitreous china squatting pan of orrisa pattern 'long pan' size 580mm white (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC (1:5:10) complete and making good to distrubed floor with PCC or cement mortar (1:3) to match with sorroundings all as directed. |
| 52 | S&F in repair vitreous half stall bowl urinal flat back,size of 465x355x265mm white(minimum),including waste coupling and waste pipe with grating ,Spreader with connection and union for discharge pipe all as specified. |
| 53 | S&F in repairs vitreous china Counter top wash basin white, flat back, size 550x400mm including fancy type half cock basin mixtre brass CP 15mm bore with long screwed shanks and fly nuts waste coupling brass CP 32mm bore, flange end bedded in red lead cement and other end fixed and PVC connection 450mm long 15mm bore with 2 Nos nuts and washes CI brackets complete all as specified and directed. |
| 54 | S&F in repairs vitreous china wash basin white, flat back, size 550x400mm including pillar tap brass CP 15mm bore with long screwed shanks and fly nuts waste coupling brass CP 32mm bore, flange end bedded in red lead cement and other end fixed and PVC connection 450mm long 15mm bore with 2 Nos nuts and washes CI brackets complete all as specified and directed. |
| 55 | S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 600 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete. |
| 56 | S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC fixed complete all as specified and directed. |
| 57 | S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 60m long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. |
| 58 | S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge. |
| 59 | S&F in repair 155 mm dia towel ring of chromium plated fixed to all as directed by Engr-in-charge. |
| 60 | Supply and fixing in repairs MS grating CP 100mm dia, with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps etc complete all as directed. |
| 61 | S&F in repairs looking mirror 600x450mm bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washeres and as directed. |
| 62 | S&F in repair 15 mm fancy type bib tap cast copper alloy with crutch or butter fly handle 15mm bore chromium plated fixed complete all as specified and directed. |
| 63 | S&F in repair 15 mm fancy type angle valves, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed by Engr-in-Charge. |
| 64 | S&F in repair 15 mm Angle Stop valves, cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions suitable for 15 mm bore tubes, complete all as specified. |
| 65 | S&F in repair 20mm bore Stop valves, cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions fixed complete all as specified and directed. |
| 66 | S&F in repair chromium plated Brass health faucet for EWC with including PVC Connection 1m long suitable for 15mm bore with all connected fittings.as approved by the GE complete all as specified and directed. |
| 67 | S&F 32/40mm dia PVC flexible waste pipe 80cm long with socket for union, for WHB/urinal/sink complete all as specified. |
| 68 | S&F in repairs of size 600mm x 100mm with SS railing glass shelf rectangular type complete all as specified & as directed. |
| 69 | S&F in repairs of 300 mm dia with SS railing glass corner shelf complete all as specified & as directed. |
| 70 | Dismantling water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified & directed by Engr-in-Charge. |
| 71 | Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks Triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as specified and directed. |
| 72 | Dismantling water tanks of capacity exc 5000ltr but not exc 1000ltr and removing from site complete all as specified & directed by Engr-in-Charge. |
| 73 | Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as specified and directed. |
| 74 | S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm dia complete all as specified & directed by Engr-in-Charge |
| 75 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed by Engr-in-Charge. |
| 76 | Dismentling floor, hearth or wall tiling incl cement mortar bedding (but ot backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 77 | M &L for Cement concrete type B- 2,1:2:4 (40mm graded aggregate) 75 mm thick as in sub base complete all as specified and as directed by Engr in charge. |
| 78 | M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles. |
| 79 | M&L for double charge vitrified ceramic tiles 8mm to 9mm thick (square/ rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed. |
| 80 | Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and as directed. |
| 81 | M&L for double charge vitrified ceramic tiles 8 to 9mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4) complete all as specified and as directed. |
| 82 | M&L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm (1:4) complete all as specified& directed by Engr-in-Charge. |
| 83 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 84 | M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 15mm thick screed bed/bedding layers in cm (1:4) complete all as spd & directed. |
| 85 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any thickness complete all as specified and directed. |
| 86 | M&L for false ceiling made out of E-board classic of size 595 x 595 x 4 mm thick, (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions all as directed and specified. |
| 87 | Dismantling of false ceiling grid any type complete all as specified and directed. |
| 88 | M&L for GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Cleaning of Sewage line (using bamboo or mechanical means) of 100mm bore from gully traps, grease traps etc. upto 1.5 m deep by removing all filtn/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley, all as specified & directed. |
| 90 | All as per Item No 89.00 here-in-before but sewage line of 150 mm bore and depth of sewage line upto 2m complete all as specified and directed. |
| 91 | Cleaning of septic tank of any capacity or description including cleaning and pumping out fluid, cleaning of sludge from compartment of septic tank including intercepting chamber & washing down with water complete and removing the sludge in covered van/trolley out side the Govt land, complete, all as directed. |
| 92 | Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removal of spoils out side MD land and taken out cover slab and reset in the same position after cleaning and testing all as specified and directed. cleaning shall be done either manually or mechanically as required and directed by Engr-in-charge. |
| 93 | All as per Item No 92.00 here-in-before but depth exceeding 1.5 m and not exc 3 m deep complete all as specified and directed. |
| 94 | Dismantling of old PVC (SWR)/CI pipes any type & any size complete all as specified |
| 95 | S & F 110mm dia UPVC, soil waste drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed. |
| 96 | S&F 110mm dia UPVC, soil waste drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed. |
| 97 | S & F 75mm dia UPVC, soil waste drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed. |
| 98 | S&F 75mm dia of outlet, PVC (SWR) floor trap plain with CP grating including jointing with solvent cement, complete all as specified.Note: UPVC fittings shall be conforming to BS 4515 DIN 19531 and DIN 19534. |
| 99 | S&F in repair,110 mm bore UPVC (SWR) bend with or without access door including jointing with solvent cement, complete all as specified. Note: UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534. |
| 100 | Supply and fixing 110 mm bore UPVC (SWR), junction single T (equal or unequal), including jointing with solvent cement, complete all as specified. |
| 101 | S&F PVC (SWR) 110 mm to 75 mm dia, reducers complete all as specified and directed. |
| 102 | S&F in repairs CI spun pipe 75 mm bore fixed to walls or laid in floors complete including jointing all as specified. |
| 103 | S&F in repairs CI spun pipe 100 mm bore fixed to walls or laid in floors complete including jointing all as specified. |
| 104 | S&F in repairs Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 100mm bore CI pipe including jointing complete all as specified and directed . |
| 105 | S&F in repairs Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 75 mm bore CI pipe including jointing complete all as specified and directed . |
| 106 | S&F CI bend for 100mm pipe including jointing complete all as specified. |
| 107 | S&F CI bend for 75mm pipe including jointing complete all as specified. |
| 108 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished smooth and even without using extra cement complete all as specified and as directed. |
| 109 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) and incl mixing water proofing @ 2% compound and finished fair and even without using extra cement complete all as specified and as directed. |
| 110 | Supply only integral water proofing compound complete all as specified and as directed. |
| 111 | M&L for rendering 5mm thick on fair faces of concrete surfaces in ceilings in cement mortar (1:3) and finished fair and even without using extra cement complete all as specified and as directed. |
| 112 | M&L for 18/19mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed CM (1:6) complete all as specified & directed by Engr-in-Charge. |
| 113 | S&F Drapery rod 25mm dia decorative type in wooden finish with brackets and side holders complete all as specified and as directed. |
| 114 | M&L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPD rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P brass/stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-charge.Note: Glazing/penelling measured and paid saperately in respective items. |
| 115 | S&F Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to but prelaminated both side withdecorative choice lamination complete all as specified and directed. |
| 116 | Supply only 5mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane all as specified and directed by Engr-in-Charge |
| 117 | S&F 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified. |
| 118 | S&F 100 mm PVC floor trap with CP grating incl jointing to waste pipe incl fixed in cement concrete type B-1 (1;2:4) complete all as specified. |
| 119 | S & F for 20 mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified. |
| 120 | S&F in repair fancy type angle valves, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed by Engr-in-Charge. |
| 121 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls/spout pipes including removing the old pipes and making good the disturbed surface as per existing complete all as specified & directed. |
| 122 | S&F 110mm PVC(SWR) bends any radius, with/without oval access door, complete all as specified and directed. |
| 123 | S&F in repair for 18/19mm thick High Density High Moisture Resistant board (HDHMR) Prelaminated both sides as in Controller's Desk ,palmed boxes,showcase,shutters of Cup Boards etc including 6mm designing teak wood beading on edges complete all as specified and as directed by Engr-in-Charge. |
| 124 | M&L for precast RCC (1:2:4) type C-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & as directed. Note: Reinforcement shall be measured and paid for separately. |
| 125 | S&F of venation blinds( super quality) to window openings complete all as specified & as directed. |
| 126 | Taking down carefully copper / aluminium point wiring light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, bell push bell buzzer lamp holder bracket etc. removing from site and making good disturbed surface of wall, floor etc complete all as specified and as directed. |
| 127 | M & L for concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled sunken boxes ( modular type) including earth dolly with modular cover plate with frame of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :-One light / fan point controlled by one way switch |
| 128 | All as per Item No 127.00 here-in-above but for One 5 Amp socket outlet on independent board complete all as specified and directed. |
| 129 | All as per Item No 127.00 here-in-above but for One 5 Amp socket outlet on same board complete all as specified and directed. |
| 130 | All as per Item No 127.00 here-in-before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed. |
| 131 | S&F ceiling rose surface bakelite 63 x50mm polycarbonate isolated body three terminals complete all as specified and as directed. |
| 132 | S&F socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and directed. |
| 133 | S&F socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed. |
| 134 | S&F switch 6 amps modular type one module one way complete all as directed. |
| 135 | S&F switch 16 amps modular type one module one way complete all as directed. |
| 136 | S & F of Lamp holder bakalite type polycarbonate with back plate suitable for batten fittings complete all as specified as directed |
| 137 | S&F of enviroment friendly indoor decorative 20 Watt LED Polycarbonate Batten to provide light in three different colours cool white, Neutral white and warm whitewith the help of switch in same batten with opal diffuser , operating voltage range 140 v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , inbuilt surge protection = 2.5 Kv, with zero mercury content including all accessaries all as specified and directed. |
| 138 | S & F of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 2.5 sqmm (Nominal area) drawn in and including concealed PVC conduit of suitable size as directed with and including one run of 2.5 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed.Note: (i) Two runs of 2.5 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and conduit shall be a unit length. |
| 139 | S&F enviroment friendly indoor decorative 10 Watt LED polycarbonate Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessaries all as specified and directed. Please Enable Macros to View BoQ information |
| 140 | S&F enviroment friendly indoor decorative 10 Watt LED polycarbonate Batten with opal diffuser , operating voltage range 140v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , colour temperature 6500 K, inbuilt surge protection = 2.5 Kv, isolation=3.75, and with zero mercury content including all accessaries all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender