Tender For Cleaning And Maintenance Of Septic Tank, Soakage Well, Sewage Line, Manholes And Drains And Repair/Maint Of Boundary Wall, Fencing, Gates And Periodical Services And Certain Misc Allied Works Services At Pts (Vikas) Under Ge (Af) Sarsawa
Tender Value
35 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
5 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning And Maintenance Of Septic Tank, Soakage Well, Sewage Line, Manholes And Drains And Repair/Maint Of Boundary Wall, Fencing, Gates And Periodical Services And Certain Misc Allied Works Services At Pts (Vikas) Under Ge (Af) Sarsawa
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 2 | M & L rendering 15mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed. |
| 3 | M & L for rendering 15mm thick in cement mortar (1:4) on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound (water proofing compound to be paid separately under relevant item) complete all as specified and directed. |
| 4 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 5 | M & L rendering 5mm thick in cement mortar (1:3) on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 6 | M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. |
| 7 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications complete all as specified and directed. |
| 8 | M & L for preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper of approved tint over 1mm thick wall care putty ccomplete all as specified and directed. |
| 9 | M & L for preparation of new plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint including primer complete all as specified and directed. |
| 10 | M & L for preparation of newly plastered surfaces of ceilings & applying two coats of oil bound distemper complete all as specified and directed. |
| 11 | M & L for preparation of old decorated surfaces of walls including complete removal of existing treatment and then applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over 1mm thick wall care putty complete as per manufacturer's specification complete all as specified and directed. |
| 12 | M & L for preparation of old decorated surfaces of walls including complete removal of existing treatment and then applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 13 | M & L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper of approved shade/tint complete all as specified and directed. |
| 14 | M & L for preparation of old decorated surfaces of walls and applying one coat of weatherproof exterior emulsion paint of approved shade/tint complete all as specified and directed. |
| 15 | M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper of approved shade/tint complete all as specified and directed. |
| 16 | Complete removal of existing treatment on walls complete all as specified and directed. |
| 17 | M & L for preparation of old decorated plastered/unplastered surfaces of walls & applying two coats of oil bound distemper including 1mm thick wall care putty complete all as specified and directed. |
| 18 | M & L for preparation of old decorated plastered/unplastered surfaces of wall and applying two coats of weather proof exterior emulsion paint including primer complete all as specified and directed. |
| 19 | Complete removal of existing treatment on ceiling complete all as specified and directed. |
| 20 | M & L for preparation of old decorated plastered/unplastered surfaces of ceilings & applying two coats of oil bound distemper including 1mm thick wall care putty complete all as specified and directed. |
| 21 | M & L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 22 | M & L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 23 | Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work,masonary etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 24 | M & L for PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in foundation after demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 25 | Dismantling of fencing wire mesh, any type complete all as specified and directed. |
| 26 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 27 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire complete all as specified and directed. |
| 28 | Restraining & resecuring the old chain link fencing including making good stable etc complete all as specified and directed. |
| 29 | S & F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290) complete all as specified and directed. |
| 30 | S & F mild steel round bars as in tie bars of 10 mm dia and over, fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete all as specified and directed.Note: Cost of cutting to length, bent to shape rquired & binding with MS wire is included in above rate. |
| 31 | S & F for Mild steel screw bolts dia of Neck 5mm to 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long complete all as specified and directed. |
| 32 | S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 33 | Restraining & resecuring the old Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed including making good stable etc complete all as specified and directed. |
| 34 | S & F in repair Punched tape concertina coil any dia or any other coil size of any type of standards,rails etc including provision of mild steel(annealed) binding wire complete all as specified and directed. |
| 35 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 36 | M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 37 | M & L for Rolled sections (of angle, Tee, channel or any other section) as in framing for cladding, glazing, view cutter and the like fixed with angle cleats and connecting plates, etc of Fe-290 (Gde E-165) complete all as specified and directed. |
| 38 | S & F steel tubular trusses including special shaped washer framed work such as in doors or gate of angle or other section with gusset plates, braces etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars , barred iron dooetc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 39 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 40 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof or wall covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 41 | M & L for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof or wall covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 42 | M & L for painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces complete all as specified and directed. |
| 43 | Cleaning of Sewage line of 100mm bore from gully traps, grease traps etc. upto 1.5 m deep by removing all filtn/silt, foreign materials and other deposits whatsoever completely and making the line free from all obstacles and testing the flow of sewer line evenly, smoothly by filling water. The cleaning operation will be carried out in suitable lengths by blocking the first and last manholes of sewage line and removing the silt/sludge & other deposits out side of MD land in covered van/trolley, complete all as specified and directed. |
| 44 | All as per Item No 43.00 here-in-above but sewage line of 150 mm bore and depth of sewage line upto 2m complete all as specified and directed. |
| 45 | All as per Item No 43.00 here-in-above but sewage line of 200 mm bore and depth of sewage line upto 3m complete all as specified and directed. |
| 46 | Cleaning of septic tank of any capacity or description by mechanical means including cleaning and pumping out fluid, cleaning of sludge from compartment of septic tank including intercepting chamber & washing down with water complete and removing the sludge in covered van/trolley out side the Govt land complete all as specified and directed. |
| 47 | M & L dewatering of soak well by pumping or any suitable means dia of soak well exceeding 2.50 m and n. exc 3.00 and depth not exc 3.00 complete all as specified and directed. |
| 48 | Cleaning of manholes depth upto 1.5 mtr by removing all silt, sludge, any other materials making clean and flushing with water complete incuding removal of spoils out side MD land and taken out cover slab and reset in the same position after cleaning and testing all as specified and directed. cleaning shall be done either manually or mechanically as required complete all as specified and directed. |
| 49 | All as per Item No 48.00 here-in-above but depth exceeding 1.5 m and not exc 3 m deep complete all as specified and directed. |
| 50 | Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified and directed. |
| 51 | M & L brick work sub class 'B' bricks (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 52 | All as per Item No 51.00 here-in-above but except bricks complete all as specified and directed. |
| 53 | M & L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 54 | M & L for PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in surface channels and drain and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed.Note: Forming fair finished channel for drain using extra cement shall be measured and paid for seperately. |
| 55 | M & L for rendering 15mm thick in cement mortar (1:4) on brick/stone wall surfaces on fair faces of brick work finished even and smooth without using extra cement with/without water proofing compound (water proofing compound wherever added shall be paid separately) complete all as specified and directed. |
| 56 | M & L for preparation of new plastered surfaces of walls and applying two coats of 1st quality acrylic distemper of approved tint over 1mm thick wall care putty complete all as specified and directed. |
| 57 | M & L for preparation of new plastered surfaces of walls and applying two coats of weather proof exterior emulsion paint of approved tint over 1mm thick wall care putty complete all as specified and directed. |
| 58 | M & L for preparation of old decorated surfaces of walls and applying one coat of weather proof exterior emulsion paint of approved tint/shade complete all as specified and directed. |
| 59 | Demolition of reinforced cement concrete as in cover/slab of drain/culvert/septic tank/soakage well/manhole etc complete all as specified and directed. |
| 60 | M & L for precast RCC (1:2:4) type C1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in cement mortar (1:6) complete all as specified and directed.Note:- Reinforcement shall be measured and paid for separately. |
| 61 | M & L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar complete all as specified and directed. Please Enable Macros to View BoQ information |
| 62 | M & L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 02, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender