Tender For Addn/Alt To Bldg. No. P-44 & Pol Store Of Ops Complex And Provision Of Cattle Guard/ Trap At 41 Weu, Af Stn Pathankot
Tender Value
9.72 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
17 days left
EMD
19446
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Alt To Bldg. No. P-44 & Pol Store Of Ops Complex And Provision Of Cattle Guard/ Trap At 41 Weu, Af Stn Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chaukhat with shutters fixed in any position complete all as specified and directed. |
| 2 | Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Material and labour for rendering 15mm thick in cement mortar 1:3 on brick surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L preperation of newely/old plastered surface and Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camouflage pattern (four) or more shades as directed by Engr-in-Charge incl necessary scaffolding and other safety arrangement to work at any height at site if required. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/gates; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 7 | S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. |
| 8 | M&L Surface excavation n.exc 30 cm deep avd averaging 15cm deep any type of soil and getting out complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for 100 mm thick, PCC (1:4:8) type B-2 using 40 mm graded stone aggregates as in sub base complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for 100 mm thick machine pressed precast concrete interlocking paver block any shape and size & Colour M-50 grade with grey cement and pigment confirming to IS 15658-2006 incl 25mm sand cushioning complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for PCC 1:2:4, B-1 using 20 mm aggregate as in benching or coping incld formwork complete all as specified. |
| 12 | M&L Removing excavated material exc. 50m but n. exc. 1.5 km and deposited all as specified and directed by Eng-In-Charge. |
| 13 | M&L preperation of new/old plastered surface white wash on walls as directed by Engr-in-Charge incl necessary scaffolding and other safety arrangement to work at any height at site if required. |
| 14 | Demolition on of existing roof treatment of APP/mudphuska including removing the salvage from the work site all as specified and directed by Engr-in-charge and Follow Instructions-(i) M&L for Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes all as specified and directed(ii) Cleaning the surface and made free of dirt, foreign particles, laitance and supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, membrane with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88 % solid content. The system includes final base preparation, epoxy primer 1:1(Resin:hardner) application with 100 % water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg per SQM .Application should be done by a company authorised applicator. Approved Make- Asian Paints, Fosrock and BIRLA |
| 15 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified |
| 16 | Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete. |
| 17 | S&F roof trusses (framed), trussed, purlins, crane gantries,light/ medium weight mild steel poles (100mm Dia), rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe-290 (Gde E-165) including distance pieces, cleats etc. |
| 18 | M & L for cement conc 1:3:6 type C-2 (40 mm graded aggregate) as in post/strut fdn complete. |
| 19 | M&L for preparation of new painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying two coat of synthetic enamel paint and priming with red oxide zink chrome complete all as specified and as directed by Engineer-in-Charge. |
| 20 | M&L for RCC M-25 slab supported on Walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc also splays, between floors and beams, etc complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 23 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Brick work with sub class 'B' bricks, straight or curved on plane exc 6m mean radius built in Cement Mortar 1:3 complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F Tubes, 80mm dia medium grade galvanised, with all fitting laid in trenches complete all as specified and directed. |
| 26 | S&F Tubes, 100mm dia medium grade galvanised, with all fitting laid in trenches complete all as specified and directed. |
| 27 | M&L for 80 mm thick machine pressed precast concrete interlocking paver block any shape and size & Colour M-35 grade with grey cement and pigment confirming to IS 15658-2006 incl 25mm sand cushioning complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender