Tender For Comprehensive Annual Maintenance And Operation Of Civil Works Of Cdc-Iesd Building, Bhu
Tender Value
1.39 Crore
Estimated cost
Bid Submission
26 Sep 2026
12 days left
EMD
2.79 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Annual Maintenance And Operation Of Civil Works Of Cdc-Iesd Building, Bhu
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge.60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern (16.91.1) |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. (2.31) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (4.1.3) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (4.1.10) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (4.1.2) |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (5.22A.6) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (5.1.3) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). (5.3) |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (6.1.2) |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) (6.12.2) |
| 11 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (8.4) |
| 12 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finishedsmooth. Granite Stone of approved shade (8.10.2) |
| 13 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (8.31) |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (9.21.1) |
| 15 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (9.21.2) |
| 16 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm (9.70.1) |
| 17 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm (9.97.3) |
| 18 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm (9.97.4) |
| 19 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. (9.83) |
| 20 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. (10.25.1) |
| 21 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (10.25.2) |
| 22 | Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment. (11.20.4) |
| 23 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent (11.56.1) |
| 24 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm (11.41A.1.1) |
| 25 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. (12.52.1) |
| 26 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) (12.45.1) |
| 27 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. (12.52.1) |
| 28 | 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) (13.4.2) |
| 29 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth\ including necessary repairs to scratches etc. complete. (13.91) |
| 30 | Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). (13.111.1) |
| 31 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.With cement mortar 1:4 (1cement: 4 coarse sand). (14.1.2) |
| 32 | Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. (14.76) |
| 33 | Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. (16.93) |
| 34 | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (17.1.1) |
| 35 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (17.2.1) |
| 36 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (17.3.1) |
| 37 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern (17.4.1) |
| 38 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. (17.16A) |
| 39 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :White solid plastic seat with lid (17.20.1) |
| 40 | Providing and fixing toilet paper holder :C.P. brass (17.34.1) |
| 41 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 630x450 mm. (17.25.1) |
| 42 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia (17.22B) |
| 43 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe32 mm dia (17.28.2.1) |
| 44 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter (18.22.2) |
| 45 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anticorrosive bitumastic paint, cutting chases and making good the wall:20 mm dia. nominal bore (18.11.2) |
| 46 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (21.1.1.1) |
| 47 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (21.1.2.1) |
| 48 | Supplying of Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore (18.52.1) |
| 49 | Providing services of plumber for operation day to day maintenance of water supply of CDC & IESD building i/c required T & P complete for attending day to day complaints and as per direction of Engineer-in-charge. (M/R) |
| 50 | Providing services of sewerman for operation and day to day maintenance of manholes, gully traps & choked sewer lines of CDC & IESD building i/c required T & P complete for attending day to day complaints and as per direction of Engineer-in-charge. (M/R) |
| 51 | Providing services of mason at CDC & IESD building i/e required T & P complete for attending day to day complaints and as per direction of Engineer-in-charge. (M/R) |
| 52 | Providing services of Carpenter at CDC & IESD building with required T & P complete for attending day to day complaints and as per direction of Engineer-in-charge. (M/R) |
| 53 | Providing services of Painter at CDC & IESD building i/c required T & P complete and as per direction of Engineer-in-charge. (M/R) |
| 54 | Providing services of helper for sewer man, mason, painter, plumber and carpenter at CDC & IESD building for attending day to day complaints and as per direction of Engineer-in-charge. (M/R) |
| 55 | Providing services of sweeper for cleaning road, malba etc. of CDC & IESD building i/c required T & P complete as per direction of Engineer-in-charge. (M/R) |
| 56 | Providing services of supervisor to get attend all the complaints of plumber,mason,carpenter,painter, sweeper and sewerman at CDC & IESD building received on day to day basis and as per direction of Engineer-in-charge. (M/R) |
| 57 | Providing and fixing Stainless steel hand shower (Health faucet) with 8 mm dia. 1.20 metre long flexible tube & wall hook with N.R.V (Back flow preventer) of approved make complete as per manufacturer's specification & as per direction of Engineer-in-charge. (M/R) |
| 58 | Providing and fixing oval shape under counter wash basin with C.P. brass single lever Basin Mixer without popup waste (Hindware Make Ref Cat. F280010SCP) system with 450mm long Braided hoses, 32 mm C.P. brass waste of standard pattern, including-painting-of-fittings, cutting and making good the walls wherever required:White Vitreous China Wash basin size 560 x 450 mm(Hindware cat no 10049 or equivalent) with a C.P. brass single lever Basin Mixer without popup waste system with 450mm long Braided hoses. (M/R) |
| 59 | Providing and fixing CP brass towel rail complete with brackets fixed to wooden clears with CP brass screws with concealed fittings arrangement of approved quality and colour of make Hindware, Parryware, Jaguar or Equivalent etc. all complete as per direction of Engineer-in-charge.450 mm long towel rail. (M/R) |
| 60 | Providing and fixing CP Brass Single lever Basin mixer of quality & make as approved by Engineer in charge. (Hindware Make Ref Cat. F280010 Single lever Basin Mixer) conforming to IS: 8931.15 mm nominal bore (M/R) |
| 61 | Providing and fixing 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm (M/R) |
| 62 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(M/R) |
| 63 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.Two coat (M/R) |
| 64 | Supplying of Stainless Steel drain jali (Hindware cat no. F860055 round drain jali 127mm linear or equivalent) |
| 65 | Supplying and stacking of stone Aggregate 20 mm nominal size at site as per direction of Engineer-in-charge. |
| 66 | Supplying and stacking of stone Aggregate 10 mm nominal size at site as per direction of Engineer-in-charge. |
| 67 | Supplying and stacking of ordinary Portland Cement (OPC-43 Grade) at site as per direction of Engineer-in-charge. |
| 68 | Supplying and stacking of Coarse sand (zone III) at site as per direction of Engineer-in-charge. |
| 69 | Supplying and stacking of Common burnt clay F.P.S. (non modular) bricks class designation 7.5 at site as per direction of Engineer-in-charge. |
| 70 | Supplying of White cement based putty at site as per direction of Engineer-in-charge. |
| 71 | Supplying of Aluminium paint at site as per direction of Engineer-in-charge. |
| 72 | Supplying of Synthetic enamel paint in black or chocolate shade as per direction of Engineer-in-charge. |
| 73 | Supplying of Water proofing materials as per direction of Engineer-in-charge. |
| 74 | Supplying of Red oxide Zinc chromate primer as per direction of Engineer-in-charge. |
| 75 | Supplying of Bleaching powder as per direction of Engineer-in-charge. |
| 76 | Supplying of G.I. pipes 15 mm dia as per direction of Engineer-in-charge. |
| 77 | Supplying of G.I. pipes 20 mm dia as per direction of Engineer-in-charge. |
| 78 | Supplying of G.I. pipes 32 mm dia as per direction of Engineer-in-charge. |
| 79 | Supplying of G.I. pipes 50 mm dia as per direction of Engineer-in-charge as per direction of Engineer-in-charge.. |
| 80 | Supplying of G.I. pipes 65 mm dia as per direction of Engineer-in-charge. |
| 81 | Supplying of G.I. pipes 80 mm diaas per direction of Engineer-in-charge. |
| 82 | Supplying of G.I. Union 15 mm nominal bore as per direction of Engineer-in-charge. |
| 83 | Supplying of G.I. Union 20 mm nominal bore as per direction of Engineer-in-charge. |
| 84 | Supplying of G.I. Union 25 mm nominal hore as per direction of Engineer-in-charge. |
| 85 | Supplying of Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore as per direction of Engineer-in-charge. |
| 86 | Supplying of Coupling/Socket fittings for 15.88 mm outer dia SS pipe as per direction of Engineer-in-charge. |
| 87 | Supplying of Reducer for 22.22 mm X 15.88 mm outer Dia SS pipeas per direction of Engineer-in-charge. |
| 88 | Supplying of Slip Coupling / Socket 15.88 mm outer dia SS pipe as per direction of Engineer-in-charge. |
| 89 | Supplying of Elbow 90° for 15.88 mm outer dia SS pipee as per direction of Engineer-in-charge. |
| 90 | Supplying of Elbow 90° for 22.22 mm outer dia SS pipe as per direction of Engineer-in-charge. |
| 91 | Supplying of Reducing Elbow 90° for 22.22 mm X 15.88 mm outer dia SS pipe |
| 92 | Supplying of Equal Tee for 15.88 mm outer dia SS pipe as per direction of Engineer-in-charge. |
| 93 | Supplying of Equal Tee for 22.22 mm outer dia SS pipe as per direction of Engineer-in-charge. |
| 94 | Supplying of C.P. Brass bib cock 15 mm as per direction of Engineer-in-charge. |
| 95 | Supplying of C.P. Brass long body bibcock 15 mm as per direction of Engineer-in-charge. |
| 96 | Supplying of C.P. Brass angle valve 15 mm as per direction of Engineer-in-charge. |
| 97 | Supplying of Mirror of superior make glass 60x45 cm as per direction of Engineer-in-charge. |
| 98 | Supplying of Flush pipe with union spreaders and clamps all in C.P. brass for single stallas per direction of Engineer-in-charge. |
| 99 | Supplying of White plastic seat (solid) with lid C.P. brass hinges and rubber buffers as per direction of Engineer-in-charge. |
| 100 | Supplying of Vitreous china orrisa type W.C. pan of size 580 mm as per direction of Engineer-in-charge. |
| 101 | Supplying of Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings as per direction of Engineer-in-charge. |
| 102 | Supplying of Bottle Trap as per direction of Engineer-in-charge. |
| 103 | Supplying of Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) as per direction of Engineer-in-charge. |
| 104 | Supplying of Chromium plated Brass screws 50 mm as per direction of Engineer-in-charge. |
| 105 | Supplying of Chromium plated Brass screws 40 mm as per direction of Engineer-in-charge. |
| 106 | Supplying of Chromium plated Brass screws 30 mm as per direction of Engineer-in-charge. |
| 107 | Supplying of Chromium plated Brass screws 25 mm as per direction of Engineer-in-charge. |
| 108 | Supplying of Chromium plated Brass screws 20 mm as per direction of Engineer-in-charge. |
| 109 | Supplying of 12.5 mm thick tapered edge plain gypsum plaster borad confirming to IS 2095 (Part 1):2011 as per direction of Engineer-in-charge. |
| 110 | Supplying of Galvanised Steel ceiling section (size 80x26x0.50 mm) as per direction of Engineer-in-charge. |
| 111 | Supplying of Galvanised Steel angle hanger (Ceiling angle) (Size 25x10x0.50 mm) as per direction of Engineer-in-charge. |
| 112 | Supplying of Hydraulic door closer tubular type Aluminium section body as per direction of Engineer-in-charge. |
| 113 | Supplying of Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges as per direction of Engineer-in-charge. |
| 114 | Supplying of EPDM Gasket for uPVC window/door as per direction of Engineer-in-charge. |
| 115 | Supplying of Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades designs except White, Ivory, Grey, Fume Red Brown etc. |
| 116 | Supplying of Silicon based Joint Sealant for Tiles as per direction of Engineer-in-charge. |
| 117 | Supplying of Double charge vitrified tile polished finish of size 60 x 60 cm as per direction of Engineer-in-charge. |
| 118 | Supplying of Ceramic Glazed Tiles 1st quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc as per direction of Engineer-in-charge. |
| 119 | Supplying of Ceramic Glazed Tiles 1st quality minimum thickness 5mm in all colours shades and designs except burgundy, bottle green, blackas per direction of Engineer-in-charge. |
| 120 | Supplying of Double action hydraulic floor spring with stai as per direction of Engineer-in-charge.nless steel cover plate as per direction of Engineer-in-charge. |
| 121 | Supplying of Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) as per direction of Engineer-in-charge. |
| 122 | Supplying of Acrylic exterior paint as per direction of Engineer-in-charge. |
| 123 | Supplying of Aluminium hanging floor door stopper with twin rubber & stopper as per direction of Engineer-in-charge. |
| 124 | Supplying of Anodised Aluminium tower bolt (barrel type) 250x10 mm as per direction of Engineer-in-charge. |
| 125 | Supplying of Double action hydraulic floor spring with brass cover plate as per direction of Engineer-in-charge. |
| 126 | Supplying of Anodised Aluminium tower bolt (barrel type) 200x10 mm as per direction of Engineer-in-charge. |
| 127 | Supplying of M.S. Holder bat clamp of approved design for 100 mm S.C.I. pipe as per direction of Engineer-in-charge. |
| 128 | Supplying of Anodised Aluminium tower bolt (barrel type) 150x10 mm as per direction of Engineer-in-charge. |
| 129 | Supplying of White Cement as per direction of Engineer-in-charge. |
| 130 | Supplying of Anodised Aluminium tower bolt (barrel type) 150x10 mm as per direction of Engineer-in-charge. |
| 131 | Supplying of Anodised Aluminium handles 125 mm with plate 175 x 32 mm as per direction of Engineer-in-charge. |
| 132 | Supplying of Acrylic distemper 1st quality , having VOC content less than 50 grams/ litre as per direction of Engineer-in-charge. |
| 133 | Supplying of Premium plastic acrylic emulsion of interior grade, having VOC content less than 50 grams/ litre as per direction of Engineer-in-charge. |
| 134 | Supplying of Water thinnable cement primer for interior wall surface, having VOC content less than 50 grams/ litre as per direction of Engineer-in-charge. |
| 135 | Supplying of Anticorrosive bituminous paint (black as per direction of Engineer-in-charge. |
| 136 | Supplying of 100% Premium acrylic dirt resistance, Silicone additives exterior paint as per direction of Engineer-in-charge. |
| 137 | Supplying of Fine sand (zone IV) as per direction of Engineer-in-charge. |
| 138 | Supplying of Epoxy based sealing Compound as per direction of Engineer-in-charge. |
| 139 | Supplying of G.I. Union 32 mm nominal bore as per direction of Engineer-in-charge. |
| 140 | Supplying of G.I. Union 50 mm nominal bore as per direction of Engineer-in-charge. |
| 141 | Supplying of G.I. Union 65 mm nominal bore as per direction of Engineer-in-charge. |
| 142 | Supplying of G.I. Union 80 mm nominal bore as per direction of Engineer-in-charge. |
| 143 | Supplying of Vitreous china flat back wash basin 630x450 mm as per direction of Engineer-in-charge. |
| 144 | Supplying of C.P. brass waste 32 mm as per direction of Engineer-in-charge. |
| 145 | Supplying of Double charge vitrified tile polished finish of size 60 x 60 cm as per direction of Engineer-in-charge. |
| 146 | Supplying of P.V.C. automatic flushing cistern 5 litre capacity as per direction of Engineer-in-charge. |
| 147 | Supplying of Weather Silicon sealant as per direction of Engineer-in-charge. |
| 148 | Supplying of Aluminium round shape handle (polyester powder coated) outer dia 100 mm as per direction of Engineer-in-charge. |
| 149 | Supplying of Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire as per direction of Engineer-in-charge. |
| 150 | Supplying of Vitreous china pedestal type water closet as per direction of Engineer-in-charge. |
| 151 | Supplying of C.P. Brass stop cock (concealed) 15 mm as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender