Tender For Construction Of 01 No Of E-Type Quarter At Mahidharpur Section Office Under Dhenkanal (R And B) Division In The District Of Dhenkanal For The Year 2025-26 (Ltr No.42793 Dt.13.11.2025) (Building Work)
Tender Value
36.07 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
11 days left
EMD
37000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhenkanal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 01 No Of E-Type Quarter At Mahidharpur Section Office Under Dhenkanal (R And B) Division In The District Of Dhenkanal For The Year 2025-26 (Ltr No.42793 Dt.13.11.2025) (Building Work)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in foundation trenches in hard soil including hard moorum stony earth mixed with stone and boulders (except sheet rocks and boulders required blasting) including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site with all leads and lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge. |
| 2 | Supplying filling in foundation and plinth with sand in layers not exceeding 150mm thick including watering, ramming including cost, conveyance, royalty of all materials, all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only). |
| 3 | Cement concrete of propertion (1:3:6) in foundation and floors using 40mm size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty of all materials and all labour T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 4 | RCC work of M-20 in column, beams, roof slab,Sloped Roof Slab,Stair Case, lintel and chajja, fins, shelves and floors slab in all floors having a minimum compressive strength ( in work test) 200kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills.(In all Floors) Column base & Foundation |
| 5 | Plinth beam |
| 6 | Column & Roof Beam (Ground Floor) |
| 7 | Lintel |
| 8 | Staircase |
| 9 | Roof Slab (In Ground Floor) |
| 10 | Chajja (2.5\\" thick) (Ground Floor) |
| 11 | Column & Roof Beam (First Floor) |
| 12 | Roof Slab (In First Floor) |
| 13 | Chajja (2.5\\" thick) (First Floor) |
| 14 | Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr. S 240 or Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel (Primary Producer like-SAIL/RINL/ TATA/ JINDAL STEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spaeer bar, chair, stage, hanger and binding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987 in Ground floor. |
| 15 | Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars etc. in First floor. |
| 16 | Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in Foundation & Plinth including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty of all materials and cost of all labour with T&P required for the work. |
| 17 | Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in superstructure including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors. |
| 18 | Fly Ash brick masonary using Fly Ash brick in superstructure In First Floor |
| 19 | Providing 16mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. In Ground Floor |
| 20 | Providing 16mm thick cement plaster in cement mortar (1:6) in First Floor |
| 21 | Providing 12mm thick cement plaster in cement mortar (1:6) finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. In Ground Floor |
| 22 | Providing 12mm thick cement plaster in cement mortar (1:6) In First Floor |
| 23 | Providing 6mm thick cement plaster in cement mortar (1:4) finished smooth in RCC surface, ceiling & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. In Ground Floor |
| 24 | Providing 6mm thick cement plaster in cement mortar (1:4) In First Floor |
| 25 | Supplying, fitting, fixing of Granite Stone tiles (up to 0.10 Sqm) in floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality of all materials etc. complete as per direction of the Engineer-in-charge. (In Ground Floor) |
| 26 | Supplying, fitting, fixing of Vitrified tiles in floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including, rubbing and polishing the surface with cost, conveyance, royality of all materials etc. complete as per direction of the Engineer-in-charge. (In Ground Floor) |
| 27 | Supplying, fitting and fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry etc. complete including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge. (In Ground Floor) |
| 28 | Supplying, fitting and fixing Ceramic wall tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry etc. complete including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge. (In Ground Floor) |
| 29 | Finishing wall surface smooth with Cement based wall putty including cost, conveyance and all taxes of all materials, labour & T&P required for the work etc. complete as per direction of the Engineer-in-Charge. (In Ground Floor) |
| 30 | Finishing wall surface smooth with Cement based wall putty including cost, conveyance and all taxes of all materials, labour & T&P required for the work etc. complete as per direction of the Engineer-in-Charge. (In First Floor) |
| 31 | Priming 1 coat with water bound wall primer of approved shade by means of brush to inside surface of walls after cleaning the surface etc. complete including cost of all materials, labour with T&P required for the work etc. complete in all respect as directed by Engineer - in - Charge. (In Ground Floor) |
| 32 | Priming 1 coat with water bound wall primer of approved shade by means of brush to inside surface of walls after cleaning the surface etc. complete including cost of all materials, labour with T&P required for the work etc. complete in all respect as directed by Engineer - in - Charge. (FF out side) |
| 33 | Priming 1 coat with water bound wall primer of approved shade by means of brush to inside surface of walls after cleaning the surface etc. complete including cost of all materials, labour with T&P required for the work etc. complete in all respect as directed by Engineer - in - Charge. (FF In side) |
| 34 | Painting 2 coats with Plastic Emulsion Paint of approved shade by means of brush to outside surface of walls complete in all floors with cost, carriage of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer - in - Charge. (In Ground Floor) |
| 35 | Painting 2 coats with Plastic Emulsion Paint of approved shade by means of brush to outside surface of walls complete in all floors with cost, carriage of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer - in - Charge. (In First Floor) |
| 36 | Painting 2 coats with water proofing weather coat of approved shade by means of brush to outside surface of walls complete in all floors with cost, carriage of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer - in - Charge. In Ground Floor. |
| 37 | Painting 2 coats with water proofing weather coat of approved shade by means of brush to outside surface of walls complete in all floors with cost, carriage of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer - in - Charge. In First Floor. |
| 38 | Supplying fixing and fittings MS Door,MS Window shutter with grill,MS grill of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost, conveyance and royalty of all materials all labour T&P required for the work complete (payment will be made on weight basis only)(In all floors) |
| 39 | Providing, Fitting & Fixing of Stainless steel of 304 grade in hand railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost,conveyance of all Materials, Labour ,T&P required for fabrication, buffing & polishing, cost of all fixtures etc. complete and as per specification & direction of Engineer-in-charge (In all floors) |
| 40 | Supplying, fitting and fixing of 32mm thick flush door shutter with frame with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per direction of Engineer - in - Charge. |
| 41 | Supplying, fitting, fixing uptwo track UPVC sliding Window made up UPVC Section as windows frame and shutter frame with 6mm thick glass as panel fitted with rubber beading including locking arrangement, all fittings with cost of materials, labour, T&P etc. complete as per direction of Engineer-incharge. |
| 42 | Painting Two coats in all floors with any approved Enamel paint on Old/new wood work after cleaning the surface, sand papering etc. including cost and conveyance of all materials, cost of paint with cost of all labour with T & P required for the work etc. complete in all respect as directed by Engineer - in - Charge. In Ground Floor |
| 43 | Painting Two coats in all floors with any approved Enamel paint on Old/new wood work after cleaning the surface, sand papering etc. including cost and conveyance of all materials, cost of paint with cost of all labour with T & P required for the work etc. complete in all respect as directed by Engineer - in - Charge. In First Floor |
| 44 | Providing 25 mm thick Grading concrete (1:2:2) using 6.7mm size chips for finished smooth on roof slab etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. In Ground Floor |
| 45 | Providing 25 mm thick Grading concrete (1:2:2) using 6.7mm size chips for finished smooth on roof slab etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. In First Floor |
| 46 | PH-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge Ground Floor 20mm dia C-PVC pipe (Ashirbad/Supreme/Astrol) |
| 47 | 25mm dia PVC pipe (Ashirbad/Supreme/Astrol) |
| 48 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 49 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 50 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 51 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 52 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 53 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 54 | 15mm CP revolving shower with 15mm x 225mm long CP shower arm |
| 55 | 25mm dia G.M or Brass F.W valve (Sakti make) |
| 56 | 32mm dia G.M or Brass F.W valve (Sakti make) |
| 57 | 15mm CP Extension piece |
| 58 | 125mm CP grating |
| 59 | 15mm size C.P. flange |
| 60 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 1000 liters capacity PVC water storage tank roof of 1st floor |
| 61 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. Ground Floor |
| 62 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge Ground Floor |
| 63 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. Ground Floor |
| 64 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 65 | 75mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 66 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 67 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 68 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 69 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 70 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 71 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 72 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 73 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 74 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 75 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 76 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 77 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge European water closet with S trap plain (Hindware/Parryware/Neycer make) Hindware-20044 |
| 78 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge W.H. basin(560x450) (Johnson Make) |
| 79 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail |
| 80 | Towel ring |
| 81 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 82 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mm x 450mm size B.E mirror |
| 83 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP Soap holder(Jaquar)CAN-CHR-1141N |
| 84 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24 x 18 x 10 sink |
| 85 | Providing and lying Plain Cement Concrete of proportion (1:2:4) in foundation and floors using 4cm (1 1/2\\") 0 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading,cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge. In Ground Floor |
| 86 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In Ground Floor |
| 87 | Supplying all materials, labour, T&P and providing and fixing Ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge of size 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 30cmx30cm In Ground Floor |
| 88 | Supplying all materials, labour, T&P and providing and fixing Glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile In Ground Floor |
| 89 | Granite Tiles=2.84x0.60m |
| 90 | Factory made single leaf rigid FRP(alternately called GRP) sanwhch composite door shutter of 32mm thick laminated ith two GRP skins with wood grain finish fabricated using UV-stabilised Isothealica Gelcoat and one layer of 450 gsm E-glass chopped starand mat (CSM) impregnated with orthopthalic palyester resin. The thikness of the skins shall not be less that 1.50mm expanded polyestyrone(EPS) stuctural foam panel of 29 mm thickness and a density of 20Kg/cu.mtr shall be used as core material .Wooden reinforcements made of seasoned sal wood reinforements for fitting the metal fittings such as tower bolts ,aldrops,handles etc. shall be provided .A Strictira; adehsive compatible with(EPS) foam shall be used for bending the core material,the sal wood reiforcements and the skins.The materials and process for manufacturing the door shutters shall conform to RC-TIFAC composites Design centre's standars and specifications and the door shutters tested in conformation to IS:40250-1998.The finish of door shutter will be plain colour white/Lvory/beige/Light grey/Mahogany/Teak wood of any other colour using high quality pigments .Three heavy whight mild steel butt hinges typpe-I(ISI-marked) size 100 mm are to be fitted on one side of shutter. Ground Floor |
| 91 | Factory made FRP (alternately called GRP) door frame of sixe75mmX100 mm fabricated using E-Glass chopped strand Mat(CSM) U.V stabilised inopthalic Gelcoat and impregnated with inopthalic resin.The thickness of the GRP sikns shall no be less that 2.00 mm .The door frame consist of foru segments which are provided with plug-in-socket arrangement in-site in the ,ould .The segments are plugged in and are joined together by means of screw . The GRP frame shall be provided with wooedn rainforcement of six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium destity foam/Plaster of paris with fibre reinforcement,Six numbers of 260mm X 25mm X 5 mm size 'S' shaped M.S flat hold fast shall be provided with the frame .The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design centre's stanards and specifications.The finish of door rrame will be plain colour white/Lvory/Beige/Light grey Golden brown Mahogany/Teak wood sand stone/Champagne /Pastel blue or any other colour using high quality pigments cimplete in all respect as per specification and direction of the Engineer in Charge Ground Floor |
| 92 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge Inside size 76cmx76cmx46cm with 18 dia RCC MH cover |
| 93 | Ext. S/D Portion Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 94 | 1 no 10 Users Septic tank Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 95 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 96 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 97 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 98 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 99 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 100 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge RCC floor, roof slab chhaja up to 4.430 m height |
| 101 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 102 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 103 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 104 | Sinking of 125 mm X 100 mm dia bore well Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 125mmdia G.I/P.V.C/M.S casing pipes for housting fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), Drilling of 125mm x 100 mm dia bore 00 mtr to 30mtr |
| 105 | 31 mtr to 48 mtr |
| 106 | Drilling of 100 mm dia bore 48 mtr to 153 above |
| 107 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 125mm dia P.V.C casing pipes 00 mtr to 45mtrs |
| 108 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 125mm dia PVC (sch-80) pipe |
| 109 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By DTH Rig |
| 110 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: Rocky terrain with boulder formation for 300m depth |
| 111 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 112 | DOL Control panel |
| 113 | 40mm dia steel short piece |
| 114 | Well cap |
| 115 | 50mm size CI bracket |
| 116 | 2.50sqmm flat cable |
| 117 | Steel rope with cover |
| 118 | Labour charges for lowering including transportation |
| 119 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 32mm HDPE pipes (Finolex/Supreme make) |
| 120 | EI- Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/Anchor/Havells/V-Guard) -do- light point Group-A |
| 121 | -do- light point Group-B |
| 122 | -do- light point Group-C |
| 123 | -do- Fan point Group-B |
| 124 | Group-C |
| 125 | -do- EX Fan point/C.B.P Group-C |
| 126 | -do- Coll bell point Group-C |
| 127 | Supply and fixing of 5 Amp plug with switch on existing board (Modular Type ) |
| 128 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection (make-Anchor/ Legrand /Roma) |
| 129 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make-Anchor/ Legrand /Roma/Great White/HPL) |
| 130 | Recessed wiring to submain of the following FR PVC insulated single core multistrand copper conductor of ISI Marked confirming to IS-694/1990 in 20mm dia nonmetalic heavy duty flexible conduct 1.6 sqmm thick along with following sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required complete in all respect as per direction of Engineer in charge (Havells/Finolex/Anhor.) 2x1.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 131 | 2x2.5 sqmm +1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 132 | 2x4 sq mm+1x1.5 sqmm 1100 Volts confirming to IS 694/1990 |
| 133 | 2x6 sq mm+1x2.5 sqmm 1100 Volts confirming to IS 694/1990 in 25 mm dia non-metalic heavy duty flexible conduit |
| 134 | For Inverter wiring 1 X 1.5sqmm |
| 135 | S/F of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose complete in all respect as per direction of Engineer in charge (Make : Cona / Anchor / Havell's). |
| 136 | S/F of 9 watt LED Bulb |
| 137 | S/F of 1x18 watt T5 fitting with all acessories in complete (Havells/Cropmpton /Philips) in direction of Engineer in charge |
| 138 | S/F of A.C Ceiling fan 48\\" size (Make-Usha-striker/Orient PSPO/ Summer cool Breeze/Havells Velocity) |
| 139 | S/F of step type Electronic Fan Regulator capacitor control ISI Marked with all connection complete in all respect as per direction of Engineer-in-charge. (Make-Usha /Havels ) |
| 140 | S/F of Exhaust fan 10\\"/12\\" size. (Make-Havells/Usha/Almonard) |
| 141 | S/F of superior type Ding dong Callbell with Bell push.(make-Anchor,cona) |
| 142 | Providing and fixing of following capacity DP MCB switch unit inside the existing mcb distribution box including drilling holes in the box making connections, etc as required with name make of SLD (MAKE-Legrand/Seimens/schneider/L & T) 63Amp DP MCB |
| 143 | 323Amp DP MCB |
| 144 | supply and fixing of 5 to 32 amp rating 240 volt c series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with comnnections testing and commisioning as required (MAKE-Legrand DPX3/Siemens betaguard /schneider acti 9 ) Single pole |
| 145 | supply and fixing of single pole mcb with sheet steel enclosure ,distribution board ,on surface /recess,complete with tinned copper bus bar ,neutral bus bar ,earth bar ,din bar ,dertachable gland plate ,interconnection .phosphate and powder painted including including earthing ect. as required ( but with out MCB/RCCB/ISLOATOR ) (MAKE-Legrand/Seimens/schneider/L & T) 12 WAY,DOUBLE DOOR |
| 146 | 8 WAY,DOUBLE DOOR |
| 147 | S/F of Computer Board Consisting 3 Nos of 5Amp and 1No.15Amp 5P. socket and Switch on M.S Board with all connection complete in all respect as per direction of Engineer in charge(Make-Anchor/Cona) |
| 148 | S/F of A.C point consisting of 32Amp DP MCB and stator with all connection complete in all respect as per direction of Engineer in charge (Roma/Legrand ) |
| 149 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993) of following capacity on existing surface / wall mounting and completer with HRC fuse links, interconnections, earthing , etc as required as per direction of Engineer-in-charge. (Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK) 63Amp ICDP main switches with MS board(Rs 2566/- + 1.24.16) |
| 150 | S/F of 18W Surface /Recessed Ceiling light(Make-Crompton/Philips/Havells) |
| 151 | S/F of StandardEarthing with medium class 40mm 3Mtr. Long ISI marked GI Earth pipe including accessories such as funnel GI nut, Bolt, washer , hinged cover plate with looking arrangement, 40mm to 20GI rediusor 5nos 20mm dia holes on GI pipe required charpol salt, Excavation of earth brick work in cement mortar complete in all respect as per specification of SR 2011 and as per Direction of Engineer-in -Charge. |
| 152 | proving and fixing of 8 SWG(4mm) dia copper wire on surface or in recess for loop earthing along with existing surface /reccessed conduit /submain wiring /cable as required |
| 153 | S/F of Street light- 90W,120 lm/w efficacy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 154 | Bulkhead fitting-ENDURA RUGBY Energy saving new geration 10W LED IP65 bulkhead luminaire with opal diffuser 10WLED6000K(Philips/Havells) |
| 155 | S/F of Wall mounted fan 16\\" size. (Make-Havells/Usha/Almonard/crompton) |
| 156 | S/F of Inverter set complete with 3KVA,24V with 2nos 200 AH Sine Wave inverter battery ( make Exide/Amaron/Luminous ) ( make of inverter- Microtek/Luminous/V-Guard) |
| 157 | S/F of Battery Trolly Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender