Tender For Restoration Of Electric Furnace No. 2 And Allied Electrical Works At Birjunallah Burning Ghat
Tender Value
2.23 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
7 days left
EMD
4500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Electric Furnace No. 2 And Allied Electrical Works At Birjunallah Burning Ghat
BOQ
| Sl. No. | Item Description |
| 1 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/1 : DISMANTLING : Dismantling of all damage fire bricks from the furnace chamber such As 9 nos Roast Bricks. Ash collection bricks (M.K-16 to M.K-24) 9 Sets angle or shaped bricks M.K-88-18 nos. M.K-100-4nos., M.K-101-4 nos refractory / side bricks M.K-27-18nos.M.K-29-18 nos through clearing of as collection chamber, air ducts by removing the ash inside the furnished chamber for patch repairing purpose. |
| 2 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/2 : REMOVING OF STACK : Removing the broken bricks & all rubbishes to outside crematory/ dumping ground incl. loading, unloading, stacking & cost for transportation during patch repairing purpose |
| 3 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/4/a : PATCH WORK WITH BRICKS: Roast bricks |
| 4 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/4/b : PATCH WORK WITH BRICKS: Ash bricks (M.K.-16 to M.K.-24) |
| 5 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/4/c : PATCH WORK WITH BRICKS:Angle bricks M.K-88 |
| 6 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/4/d : PATCH WORK WITH BRICKS: Angle bricks M.K-100-4nos |
| 7 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/4/e : PATCH WORK WITH BRICKS: Angle bricks M.K...101-4nos |
| 8 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/4/f : PATCH WORK WITH BRICKS: Side bricks M.K-27 |
| 9 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/4/g : PATCH WORK WITH BRICKS: Side bricks M.K-29 |
| 10 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/4/h : PATCH WORK WITH BRICKS: Good quality fire clay mortar Washing of the entire chamber with Sodium Siliminate clay should be necessary. |
| 11 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 39-E/5 : ALTER (WITH BRICKS M.K.92): Construction of Alter in front of furnace chamber flash to furnace door inside with M.K ...92 fire bricks with good quality fire clay mortar |
| 12 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 40-E/13/a : CLEANING AND REPAIRING OF FUEL DUCT PASSAGE:Removing the complete damaged R.S bricks and R.S slab of the (U.G) duct passage of the furnace chamber and thorough cleaning of the duct passage upto the start of brick build chimney by removing ash/carbon particles and relining the same with R.S Slabs & R.S bricks after mending good damages in the duct passages with insulation brick and red brick (1:4) with all necessary cementing masonry work |
| 13 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 41-E/14/a : HEATING ELEMENT: Supply and fixing the Heating element (Heatco make) of capacity 4.5 K.W to be working in supply voltage of 240 V 50 Hz made from 80/20 Nicrome wire of 8 SWG in coiled coil from welded S.S stud on both ends. The coil should be inserted into the groove of existing coil brick after proper cleaning and the S.S Studs housed into the ceramic caller tube wrapped. With asbestos rope for tight fitting and sealing as heat proof extended S.S stud to be connected brass/ copper connector with complete connection in all respect of existing system. |
| 14 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 41-E/14/b : HEATING ELEMENT:Supplying and fixing the terminal connector having drill holes for inserting S.S stud of 8.5 mm dia and connection point of existing copper wires of overall dimension 80mm long x25mm square shape. |
| 15 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18:16-B/19/cSupply & fixing of 415/440 Volt, HRC fuse (Make: L&T/ Havels/CGL/GE).for125 Am |
| 16 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 41-E/17 : COMPENSATING WIRE: Supply, laying drawing of 2 core 0.5 sq mm CR-A1 compensating wire for heat sensing from thermocouple to temperature controller covered with asbestos embedded tape (Flame India make) |
| 17 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT1841-E/15/a/i TEMPERATURE CONTROLLER: a) Supply and fixing the digital typetemperature controller of range (0-1200) deg. C of overall dimension 92 sq mm dia x 105mm depth having (CR-A1) heat sensor and 1 no +1 N.C change over contact to be actuated at crossed of desired temperature in deg.C complete power supply unit of 230V 50 Hz. Blue Max make |
| 18 | UDMA.ELECTRIC-MECH.WORK(VOL-1)OCT18 41-E/16/a/i : THERMOCOUPLE: a) Supply and fixing the thermocouple of heat sensing range 0-1200 deg. C having (Cr-A1) sensor house in S. Sd 304 casing of dimension 1200 mm long x 22 mm OD complete encased in to it and fitted terminal on other end for connection of compensating wire. Heatco make |
| 19 | Sub Total |
| 20 | GST 18% |
| 21 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender