Tender For Special Repair To Building No Et-421 Single Officer Living At Hattigor Under Ge Rangia
Tender Value
29.90 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
19 days left
EMD
59800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baksa → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Building No Et-421 Single Officer Living At Hattigor Under Ge Rangia
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutter from the frame) each including Builders Hardware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed. |
| 2 | Taking down chowkats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each including Builders Hardware and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | Dismantling framed trusses (Wooden) span n.exc 10m complete all as specified and as directed. |
| 7 | Dismantling timber scantling 40 sq cm and over in section in any position complete all as specified and directed. |
| 8 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 9 | Dismantling of ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets complete all as specified and as directed. |
| 10 | S&F of factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19x19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed. |
| 11 | Supply and fix factory made solid panelled PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm wide stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap for top rail and bottom rail; panels of plain colour PVC sheet, supplying and fixing in the frame including butt hinges and plaster the surface and painting etc. complete all as specified and directed. |
| 12 | S&F for powder coated anodised aluminium sliding window and ventilator frame made up 62mm/29.5mm 1.5mm thick aluminium section & shutter made up 38mm/20mm/1.5mm thick without sash bar aluminium section including all necessary joining cleats, hold fast, rubber gasket, anodised snap beading, 4mm thick plain/tinted glass, SS wire mesh, necessary fittings, suitable aluminium handle and locking arrangement etc complete as specified and directed by Engineer-in-Charge. |
| 13 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/window/doorsetory windows & other frames/chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 14 | S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 5mm thick moulded PVC prelam sheet on front face and 5mm prelam coloured PVC sheet on back face, complete all as specified and as directed. |
| 15 | S&F Factory made solid wire gauzed PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam PVC 'C' channel having a prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panels will be wire gauzed in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauze shall be stretched to tighten firmly and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 16 | Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 17 | S&F for stainless steel mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fitted with tinned tacles or galvanised wire staples complete all as specified and as directed. |
| 18 | S & F 150mm in size aluminium handles, cast type, anodised complete all as specified and as directed. |
| 19 | S & F 100mm in size aluminium handles, cast type, anodised complete all as specified and as directed. |
| 20 | S&F 200 mm aluminium anodized barrel tower bolt, of extruded section and fixed in position complete all as specified and as directed. |
| 21 | Supply and fix 100 mm long Aluminium anodised barrel tower bolt 12mm dia of extruded section (Conforming to IS) complete all as specified and as directed. |
| 22 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 23 | S&F 125 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed. |
| 24 | S&F floor door stopper 14cm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 25 | S&F in repair exposed GI powder coated snap grid frame of false ceiling 600 x 600 mm size of wall angle 25 x 25 x 0.30mm size cross Tee 22 x 35 x 0.60mm with 1mm dia GI suspender fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3mm including supply and fixing of 4mm thick pre painted E-board in false ceiling including fixing arrangement from roof all as specified and as directed. Note: Rate included for lowering/shortening of electric fittings such as fan, light fittings etc. |
| 26 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 27 | M&L for brickwork with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 28 | M&L brick work using sub class 'B' bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified. |
| 29 | M&L 10mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces without using extra cement complete all as specified and directed. |
| 30 | M&L for 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm and 5mm thick) mixed with water proofing compound in top layer @200ml per bag of cement or as per manufacturer's instructions finishing the surface fair & even complete all as specified and as directed.Note : Liquid water proofing compound shall be measured and paid separately. |
| 31 | Supply only liquid water proofing compound conforming to relevant IS complete all as specified and as directed. |
| 32 | Material and labour for two coat of oil bound distemper over a coat of 1.5mm thick wall putty on newly plastered surfaces of walls incl. primer and necessary preparation of surfaces all as specified and as directed. |
| 33 | M&L for preparing new plastered surface of wall and applying two coats of cement base paint over a coat of primer including preparation of new surfaces complete all as specified and as directed. |
| 34 | Material and labour for Hardcore of gauge n exc. 63 mm , stone or boulders, deposited , spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 35 | M&L for damp proof course in cement concrete 1:2:4 type B0, 25mm thick to horizontal or vertical surfaces including necessary formwork complete all as specified. |
| 36 | M&L 75mm thick P.C.C 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base/path etc complete all as specified and as directed. |
| 37 | M&L for vitrified ceramic tiles 8-10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor/skirting and pointed in white or coloured cement to match complete all as specified and as directed. |
| 38 | M&L for Vitrified Ceramic joint free tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/daddo over 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 39 | M&L for non skid ceramic digital coloured floor tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor tiles complete all as specified and as directed. |
| 40 | M & L for glazed ceramic colour tiles 450X300X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile approved laid over 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting dados repairs to steps complete all as specified and as directed. |
| 41 | Material and labour for 75mm thick PCC (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate ) as in plinth protection; etc laid in bays / panels not exc. 2.00 Sqm each including construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 42 | M&L for RCC 1:2:4 Type B-1 (20 mm graded agg) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed. |
| 43 | Use and Waste for formwork to sides and soffits of shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 44 | Material and labour for Mild steel deformed or twisted bars (TMT) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/slab/ as in ribs, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified. |
| 45 | All as per item Ser No 44 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 46 | S&F mild steel work in in roof truss trusses purlin, brackets, cleats posts etc complete using Fe 410-w (gde E-250) Quality A including welding complete all as directed as in additional stiffners and wind ties complete all as specified and as directed. |
| 47 | S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 48 | S&F Pre-painted galvalume aluminium zink coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. |
| 49 | M&L for preparation new surfaces of steel and iron surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 50 | S&F in repairs Vitreous China Wash down couple water closet white or coloured (Cistern mounted) pan and S/P trap of 680x370x750mm with and including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or anodised aluminium hinging device including connection to drain (or outgoing pipe) and anti syphonage pipe, etc., complete all as specified and as directed by Engineer-in-Charge. |
| 51 | S&F Vitreous China counter top wash hand basin, white 550 x 400 mm including CP waste coupling, waste pipe, counter top with 18mm thick granite of any colour complete all as specified and as directed. |
| 52 | S&F in repair brass chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. |
| 53 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 54 | S&F PVC Waste pipe 32/40mm dia complete all as specified and directed. |
| 55 | S&F in repair Stainless steel Grating 100/125mm with/without hole for waste pipe complete all as specified and directed. |
| 56 | S&F 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipe complete all as specified and directed. |
| 57 | S&F stop valves/Angle valve CP, Fancy type 15mm bore, screwed down for iron pipe or brass ferrule complete all as specified and directed. |
| 58 | S&F fancy type Pillar taps of 15 mm bore cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 59 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 60 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 61 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 62 | S&F in repairs 32 mm high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 63 | S&F unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in 15mm dia and fixed in walls Floor incl Taking up or down steel water tubing & connections complete all as specified and directed. |
| 64 | All as per item No. 63, but 20mm dia complete all as specified and as directed. |
| 65 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and directed. |
| 66 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and directed. |
| 67 | S&F PVC (SWR) bends any radius 110mm bore in repairs complete all as specified and as directed. |
| 68 | S&F PVC (SWR) bends any radius 75mm bore in repairs complete all as specified and as directed. |
| 69 | S&F PVC (SWR) junction single (single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and directed. |
| 70 | S&F PVC (SWR) junction single (single T) equal or unequal with access door bore of pipe 75 mm complete all as specified and directed. |
| 71 | M&L in Construction of manholes with 150 mm dia bore for connecting new drains making good to pipe, rendering, benching, forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished as required, Drg No CESZ/TD/40 sheet No 56 complete all as specified and as directed. (Inner Dimension 1m x1m) depth as per ground condition complete all as specified and as directed. |
| 72 | S&F of 150 mm internal diameter of double wall corrugated (DWC) high density polyethylene pipes (HDPE), and stiffness classes-8 (SN-8) with ISI marked (with CML no) with and including all fitting & jointing material for sewage line and laid in trenches as specified in IS 16098-2013 part-2 complete all as per specified and as directed by Engineer-in-charge. |
| 73 | S&F Rotational moulded polyethylene water storage tank of 1000 Ltrs capacity cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part-I including taking down of old unserviceable tank complete all as specified and as directed. |
| 74 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed. |
| 75 | S&F in repair fancy type curtain/hanger rods of mild steel pre painted with fixing decorative bracket stops rollers etc complete all as specified and directed. |
| 76 | M&L 300x300x25mm thick prepolished cement concrete chequered tiles jointed in neat cement slurry and pointed in white or coloured cement to match the floor and including 20mm thick screed bed in CM 1:4 and incl removal of old and necessary demolition and all as specified and as directed. |
| 77 | S&F in repair 20mm dia Gun metal, globe or Gate valve with iron wheel head screwed both ends for iron pipe, complete all as specified and as directed. |
| 78 | S&F 5mm thick rubber neading strips of entrance doors having width exc 3cm and not exc 5cm to arrest entry of insects including taking down existing one complete all as specified and as directed. |
| 79 | S&F 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and as directed. |
| 80 | Taking down carefully aluminium/copper point wiring (light fan, socket or power, call bell point) complete incl fittings and fixtures such as switches, sockets, light fittings, ceiling rose, pendants, lamp holders, shade fittings and fixtures etc; separating serviceable fittings for reuse in the same work and removing unserviceable fittings and fixtures with wiring cable, battens, wooden boards etc from site and making good disturbed surfaces of walls, floors, ceiling etc all complete all as specified and as directed by Engineer-in-charge. |
| 81 | Taking down carefully unserviceable main switches and DB's incl wooden bds and removing from site incl making good disturbed surfaces of walls all complete. |
| 82 | Taking down and refixing old ceiling fans and to be kept safely in store and refixing the same after proper cleaning to the existing location along with suitable fan hook/hanging rod and testing complete. |
| 83 | M&L for point wiring with 1.5 sqmm size (nominal area) PVC insulated unsheathed single core multi stranded FRLSH copper conductor cable drawn into and including PVC concealed (wall only) conduit and conduit accessories and fittings like bends, elbow, crosses, etc. with PVC round block and PVC terminal boxes with 3.00mm thick laminated sheet cover for mounting fittings like; switches, sockets, fan regulator, etc. incl 1.5 sqmm size PVC insulated multistranded FRLSH copper conductor cable as earth continuity conductor and connected to earth dolly for one light/fan/exhaust fan/bell point controlled by one 1-way switch/bell push, complete all as per specified and as directed by Engineer-in-Charge. |
| 84 | All as per Item No. 83 here-in-above, but for One 3 pin socket outlet, 5 Amps on the same board, complete all as specified and as directed by Engineer-in-charge. |
| 85 | All as per Item No. 83 here-in-above, but for One 3 pin socket outlet, 5 Amps, independent board, complete all as specified and as directed by Engineer-in-charge. |
| 86 | All as per Item No. 83 here-in-above, but for One 3/5 pin socket outlet, 15 Amps, independent board, with cables 4 sq. mm size, complete all as specified and as directed by Engineer-in-charge. |
| 87 | S&F Modular Switch, One Module, 1-way, 10 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 88 | S&F Modular Switch, One Module, 1-way, 20 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 89 | S&F Modular Socket, 3 Pin, combined, two Module, 10 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 90 | S&F Modular Socket, 2/3 Pin, combined, two Module, 20 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed. |
| 91 | S&F Modular stepped type electronic fan regulator, two module, 240V, AC, complete all as specified and as directed by Engineer-in-charge. |
| 92 | S&F Lamp holder modular, PVC/Polycarbonate type complete all as specified and as directed by Engr-in-Charge. |
| 93 | S&F of ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated body, complete all as specified and as directed by Engineer-in-charge. |
| 94 | S&F Modular bell push 6A 1 module complete all as specified & directed. |
| 95 | S&F Bell Buzzer Ding Dong AC, 230 volts single pole complete all as specified & directed. |
| 96 | S&F modular cover plate (white) with frame, 3-module, complete all as specified and as directed by Engineer-in-charge. |
| 97 | S&F modular cover plate (white) with frame, 6-module, complete all as specified and as directed by Engineer-in-charge. |
| 98 | S&F modular cover plate (white) with frame, 8-module, complete all as specified and as directed by Engineer-in-charge. |
| 99 | S&F surface and wall mounted LED tube light fitting 1x 20W, (4 Feet) with aluminium housing & integrated electronic driver, 6500K, 220-240 Volts, AC decorative box type with and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engineer-in-charge. |
| 100 | S&F slim square panel LED luminaire with frame 600 mm x 600 mm, white powder coated with CRCA housing, 35/36 watt, 220-240 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cables of suitable size, complete all as specified and as directed by Engineer-in-charge. |
| 101 | S&F LED tube light fittings mirror type with high output diffuser 10 Watt, (2 Feet) 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor complete all as specified and as directed by Engineer-in-charge. |
| 102 | S&F 10 watt capacity, B-22 base LED Bulb/lamp, complete all as specified and as directed by Engineer-in-charge. |
| 103 | S&F Indoor Wall Lamp for living and Bed room B-22 Light complete all as specified and as directed. |
| 104 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed. |
| 105 | S&F of exhaust fan, heavy duty, steel body, AC single Phase, 230V of size 300m sweep with, blades, frame and louvers including connecting up with three core flexible copper cables of suitable size, complete all as specified and as directed by Engineer-in-charge. |
| 106 | Supply and fix Sheet metal enclosure for AC connection with a two pin and earth plug socket complete with one single pole MCB upto 32 Amps,240 volts 50HZ, breaking capacity 10KA,C series complete all as specified and as directed. |
| 107 | S&F of Sheet Metal Enclosure MCB DB SPN, 12 way 240 volt, with suitable amp rated Bus-bar, double door type MCB DB suitable for mounting incoming and outgoing MCBs of any type, complete all as specified and as directed by Engineer-in-charge. |
| 108 | S&F of Sheet Metal Enclosure MCB DB SPN, 8 way 240 volt, with suitable amp rated Bus-bar, double door type MCB DB suitable for mounting incoming and outgoing MCBs of any type, complete all as specified and as directed by Engineer-in-charge. |
| 109 | S&F in-repair of MCB Triple Pole & Neutral (TPN), 'C' Curve, 63 Amps, 415 Volt for fixing on MCB DB's, 10 KA, 50 Hz, conforming to IS/IEC 60898, connecting up and testing, complete all as specified and as directed by Engineer-in-charge. |
| 110 | S&F MCB Single Pole & Neutral (SPN), 'C' Curve, 32 Amps, 240 Volt for fixing on MCB DB's, 10 KA, 50 Hz, conforming to IS/IEC 60898, connecting up and testing, complete all as specified and as directed by Engineer-in-charge. |
| 111 | S&F MCB Single Pole (SP), 'C' Curve, 6-32 Amps, 240 Volt for fixing on MCB DB's, 10 KA, 50 Hz, conforming to IS/IEC 60898, connecting up and testing, complete all as specified and as directed by Engineer-in-charge. |
| 112 | S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium housing and heat resistant, IP 66 street light fitting luminaire with high power LEDs as light source and heat resistant, 35 watts with pre wired and lens embedded PC cover having Top Opening separate driver compartment, with impact and corrosion resistant including thermal management in multiple optics and necessary mounting arrangements/fixing bracket, complete all as specified and as directed by Engineer-in-charge. |
| 113 | M&L sub main wiring two run of size 06 Sqmm PVC insulated electric power cable(heavy duty) 1100 Volt Grade with stranded copper conductor with 06.0 Sqmm PVC insulated copper conductor earth wire in PVC Conduit of suitable size (two run of 06 Sqmm cable and one of 6.00 Sqmm wire and one run of PVC conduit/Casing Caping will be measured as one unit) including dismantling of existing unserviceable submain wiring complete all as specified and as directed. |
| 114 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft / loose soil complete all as specified and as directed. |
| 115 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft/loose soil, complete all as specified and as directed. |
| 116 | Removing excavated materials (soils) not exc. 50.00 M and deposited where directed at a level not exc. 1.50 M above the starting point in soil, complete all as specified and as directed. |
| 117 | M&L Sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreading thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. |
| 118 | Supply and laying sub class B bricks of size 230x125x73mm (+/- 10% tolerance limit) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed. |
| 119 | Supply, laying, jointing and testing LT underground electric power cable crossed linked XLPE insulated, two or more core galvanized steel strip or wire armored / PVC insulated armored cable heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 sqmm 2 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts or passing through pipes etc fixing and connecting accessories such as Aluminium cable lugs, cable glands, nut, bolts, washers etc complete all as specified and as directed.Note: Earth work, excavation, GI pipe, sand cushioning and protection brick shall be measured and paid separately under appropriate items. |
| 120 | Supplying and fixing Galvanised mild steel pipe/tubing, light grade complete with all fittings of 40 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps, bolts, nuts and washers as in cable protection complete all as specified and as directed. |
| 121 | M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excavation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) including taking down old unserviceable one, complete all as specified & testing on completion. NOTE: (i) Item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) Item rates includes the cost of 7.5 mtr GI earth wire. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender