Tender For Detailed Estimate For The Work- Repair And Renovation Of Drug De-Addiction Building In Mkcg Hospital Premises At Berh Ur Buildings.
Tender Value
19.12 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
19200
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Detailed Estimate For The Work- Repair And Renovation Of Drug De-Addiction Building In Mkcg Hospital Premises At Berh Ur Buildings.
BOQ
| Sl. No. | Item Description |
| 1 | Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris with in 50m lead including cost of all labour with T&P etc. complete. (Excluding GST) Ground Floor |
| 2 | 1st Floor |
| 3 | 2nd Floor |
| 4 | DISMANTLING brick or stone masnory in lime or stone mortar under 3m height and removing the debris within 50m lead including stacking the useful materials for reuse with cost of all labour and T&P required for the work etc. complete(excluding GST) |
| 5 | Earthwork in excavation in foundation in all kinds of soil including hard moorum, stony earth mixed with boulders (except sheet rock and boulders requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from worksite with all leads and lifts including cost of all labour and T&P cess and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.(excluding GST) |
| 6 | Filling in foundation and plinth with SAND well watered and rammed in 23.5 (9'') thick layers with all leads and lifts with cost conveyance, cess and royalities of materials and labour with T&P with cost, conveyance for the work etc. complete as directed by the engineer in charge (measurement will be taken on finished compacted section only) (Excluding GST). |
| 7 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3.2) size clean hard black broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6) thick to the required level ramming watering and curing etc. complete including cost conveyance and royalties of all materials and labour with T&P required for the work etc. complete including dewatering if required.(excluding GST) |
| 8 | R.C.C. work M-25 having minimum compressive strength in work test of 200kg/square meter in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and 516 using 12mm to 20mm size (20mm not to exceed 25%) hard black broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete, watering and curing for 4 weeks centring, shuttering and finishing the exposed surfaces smooth providing grooves to beads where necessary, providing drip cess and proper randy the joint with wall surface where necessary and providing fan hooks as per requirement and ceiling smooth to receive white washing or painting including cost, conveyance, royalties, of all materials and labour with T&P required for the work etc .complete in all respect but excluding cost of binding wire of 18 to 20 gauge and labour charges for straightening cutting bending binding and laying the grills and placing in proper position etc. complete as per specification and direction of the Engineer-in-charge. (excluding GST) |
| 9 | Straightening bent up or coiled HYSD rods, cutting bending cranking hooking welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding tying the grills, hoisting, lowering and placing in proper position as required for RCC works with cost conveyance of m. s. rods or tor steel and binding wires of 18 to 20 gauge and labour with T&P required for the work etc. complete in all floors (weight of binding wires will not be made on weight of m. s. rods or tor steel only).(excluding GST) |
| 10 | FLY ASH BRICK (23cm x 11cm x 8cm) masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in F&P using clamp burnt bricks of 9 size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) |
| 11 | FLY ASH BRICK (23cm x 11cm x 8cm) masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in Superstructure using clamp burnt bricks of 9 size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) |
| 12 | 12mm (1/2) thick cement plaster (1:4) finished smooth to outside/inside brick walls after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST) |
| 13 | 1st Floor |
| 14 | 2nd Floor |
| 15 | 6mm (1/4) thick cement plaster (1:4) to R.C.C. surfaces finished smooth including close deep chipping and slurry treatment including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) |
| 16 | Supplying fitting and fixing of wire mesh or expanded metal / BRC jally with sal woods battens (7.5 cm X 12 cm) with wire mesh with painting of approved quality including cost, conveyance of materials and labour with T&P required for the work etc. Complete as per the specification and direction of engineer in charge. (excluding GST) |
| 17 | Supplying fitting and fixing up window (sliding type) made up aluminium section 9778 as windows frame section no 4096, 9777 and 3994 as shutter frame with 5 mm thick black glass as panel fitted with rubber beading locking arrangement including all fitting cost of all material taxes labour T&P etc complete as per the direction of the Engineer in charge. (excluding GST) |
| 18 | Providing and fixing of aluminium door with OEL anodized aluminium DOOR section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapperd clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including cost conveyance cess of all materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-Charge. (excluding GST) |
| 19 | 1st Floor |
| 20 | Providing fitting and fixing of PARTITION walling OEL aluminium anodized section no. 9210 and 9207 as single groove and double groove respectively and horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12mm thick pre-laminated board (Nova pan make) and jointing angle no. 1855 etc. with cost of all materials, labour cess etc. complete. (excluding GST) |
| 21 | 1st Floor |
| 22 | Providing and fixing plain GYPSUM BOARD CEILING suspended from roof by adjustable g.i. ceiling angle with spread at a distance not more than 600mm fixed a rope by rowel plug and stiff cleat, gypsum board 12.5mm thick held by g.i. perimeter channel MF-3 and intermediate channel MF-7 framing boarding jointing and finishing with special type of gypsum compound etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer -in-charge (excluding GST) |
| 23 | 1st Floor |
| 24 | Fixing of vetrified tiles colour/printed series in floor trades of steps and landing with cement morter 1:4 with pigments jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) |
| 25 | 1st Floor |
| 26 | Supplying fitting and fixing of CERAMIC TILES (upto 0.10 sqm) in dado 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) |
| 27 | 1st Floor |
| 28 | Supplying fitting and fixing of vitrified industrial tiles in floors 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) |
| 29 | Providing and laying factory made chamfered edge Cement Concrete Paver Block of required strength 80mm thick ness & size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Yellow colour and pattern over 50mm thick compacted bed of coarse sand, compacting and proper embeding/laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and patten, finishing and sweping extra sand in foothpath parks, lawns, drive ways or light traffic parking etc. all complete as per manufacturers specification and direction of Engineer-in-charge. (excluding GST) |
| 30 | Supplying fitting and fixing of GRANITE TILES ( above 0.10sqm to 0.4sqm) in floors 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) |
| 31 | Supplying fitting and fixing 32mm thick FLUSH DOOR both side skin moulded at in back and the size of outer frame being of 33 x 57 mm. Accessories/gaskets are to be used as per the manufacturers supply and specification like handle, lock and floor spring of approved quality including cost conveyance and labour with T&P etc. complete. (excluding GST) |
| 32 | Supplying fitting and fixing WPC (wood polymer choukhat) including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) |
| 33 | Providing and fitting and fixing of furnishing of wall panelling made of 12 mm HDHMR premium quality ply and 2 mm thick mica approved brand of approved quality over frame of vertical 19 mm thick HDHMR ply placed 1 c/c including cost of all materials labour T&P etc complete (Excluding GST |
| 34 | Providing and fitting and fixing of furnishing of wall panelling made of 12 mm HDHMR premium quality ply and 2 mm thick mica approved brand of approved quality over frame of vertical 19 mm thick HDHMR ply placed 1 c/c including cost of all materials labour T&P etc complete (Excluding GST |
| 35 | Finishing wall surface of walls with acrylic WALL PUTTY (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST) |
| 36 | Priming one coat with any approved primer to wood surface including sand papering to polishing the surface smooth with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) |
| 37 | 1st Floor |
| 38 | 2nd Floor |
| 39 | Wall painting two coat with PLASTIC EMULSION PAINT of approved shade and approved make over coat of primer to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. (excluding GST) |
| 40 | 1st Floor |
| 41 | 2nd Floor |
| 42 | Wall painting two coat with WEATHER COAT of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) |
| 43 | 1st Floor |
| 44 | 2nd Floor |
| 45 | Supplying providing fixing of MS grill with cost and conveance royality and taxes of all materials and labour with T&P required for the work etc complete in all respect as per drawing and techincal specification and as directed by the engineer in charge. Excluding GST) |
| 46 | Labour charges for hoisting of joists and trusses in proper position as directed by the officer-in-charge with cost of labour T&P etc. complete as per direction of the Engineer-in-charge.(excluding GST) |
| 47 | Enamel painting two coats with any approved paint over a coat of priming to WOOD work and IRON work including cost of the primer and sand papering polishing the surface with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) |
| 48 | 2nd Floor |
| 49 | Providing fitting and fixing plain formed METASHIELD (CRILL STEEL SHEET) standard back cost coloured 0.5 nominal TCT 600mm in standard length at 300mm with supporting steps jointing materials etc. including cost of all materials, machineries, T&P etc. Metashield EPG-10 Grace special polyester colour coating of 20 micron DFT on exposed surface and 5 micron DFT on unexposed surface over 5 micron DFT of special primer on both surface on OCRCA steel of minimum yield strength 240 mpa with hot dip zinc coating moss of 120gm confirming to IS 277 etc. including cost conveyance of materials and labour with T&P required etc. complete.(excluding GST) |
| 50 | Carriage of earth by mechanic means with cost of all leads and lift upto 5.00 km including with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete (excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender