Tender For Construction Of Sc Building At Bamebari Under Joda Block In The Dist. Of Keonjhar
Tender Value
55.06 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
11 days left
EMD
55080
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sc Building At Bamebari Under Joda Block In The Dist. Of Keonjhar
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS : - Earth work in excavation of foundation in hard soil or gravelly soil within 50 m initial lead and initial lift, including dressing and levelling the bed etc. complete |
| 2 | Filling in foundation and plinth with excavated earth including watering and ramming as per the direction of Engineer-in-Charge. |
| 3 | Supplying and filling foundation and plinth with sand wall watered and rammed with cost conveyance and royality, taxes of all materials and labour (T&P) etc. complete. |
| 4 | Cement Concrete (1:3:6) in Foundation using 4 cm size bhg metal including watering, curing with cost, conveyance, royalty and taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. |
| 5 | Cement Concrete (1:2:4) using 12mm size CBHG Chips including watering, curing with cost, conveyance, royalty and taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. |
| 6 | R.C.C. M20 using 20 mm & down size b.h.g.c.b chips including watering, curing with cost, conveyance, taxes and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. (Foundation footing) |
| 7 | Plinth Beam |
| 8 | Column and Beams ( GF ) |
| 9 | Column and Beams ( FF ) |
| 10 | Column and Beams ( 2ndF ) |
| 11 | Lintel( GF ) |
| 12 | Lintel ( FF ) |
| 13 | Sunshade( GF ) |
| 14 | Sunshade( FF ) |
| 15 | R.C.C Shelves |
| 16 | R.C.C Shelves(FF) |
| 17 | R.C.C Stair |
| 18 | R.C.C Stair(FF) |
| 19 | Roof slab,landing & Chajja |
| 20 | Roof slab,landing & Chajja (FF) |
| 21 | Roof slab,landing & Chajja ( SF) |
| 22 | Cutting, Bending, binding and tying the grills and placing in position including cost, conveyance, taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. |
| 23 | 1st Floor |
| 24 | 2 nd floor |
| 25 | 20mm thick C.P. (1:4) as grading plaster including watering, curing, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. |
| 26 | Fly Ash Brick masonry with CM (1:6) in foundation including watering, curing with cost, conveyance, royalty and taxes of all materials & labour (T&P) etc. complete as per the direction of Engineer-in-Charge. |
| 27 | Fly Ash Brick masonry with CM (1:6) in superstructure including watering, curing with cost, conveyance, royalty and taxes of all materials & labour (T&P) etc. complete as per the direction of Engineer-in-Charge. (Ground Floor) |
| 28 | 1st Floor |
| 29 | 2nd Floor |
| 30 | 16mm thick C.P. (1:6) including watering, curing, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. (Ground Floor) |
| 31 | 1st Floor |
| 32 | 2nd Floor |
| 33 | 12mm thick C.P. (1:6) including watering, curing, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. (Ground Floor) |
| 34 | 1st Floor |
| 35 | 2nd Floor |
| 36 | Supplying, fitting, fixing of Vetrified tile flooring on 20mm thick bed of C.M. (1:4) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. |
| 37 | 1st Floor |
| 38 | Supplying, fitting, fixing of Vetrified tile in dados on 12mm thick C.P. (1:3) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. |
| 39 | 1st Floor |
| 40 | Fixing Grinite tiles in floors treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete. (GF) |
| 41 | 1st Floor |
| 42 | Fixing tiles (Vitrified Industrial Tiles) in floors treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubing and polishing with cost,coveyance of all materials etc. complete.(GF) |
| 43 | 1st Floor |
| 44 | Supplying, fitting, fixing of Vetrified Industrial tile in dados on 12mm thick C.P. (1:3) jointed with neat cement slurry & pigment to match the shade including watering & curing with cost, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge. |
| 45 | 1st Floor |
| 46 | 6mm thick C.P. (1:4) as ceiling plaster including watering, curing, conveyance, royality & all taxes of materials & labour with T&P required for the work etc. complete as per direction of Engineer-in-Charge.(GF) |
| 47 | 1st Floor |
| 48 | 2nd Floor |
| 49 | Providing, supplying and fitting and fixing of M.S. Door / Window shutters, gates & M.S. grills as per approved design etc. complete.M.S.Grill |
| 50 | Providing Fitting Fixing of UPVC casement Door using UPVC reinforced profiles 60mmx55mmx2.5mm for outer frames and 102mmx60mmx2.5mm for casement door sash profile & 74mmx60mmx2.25mm mulion profile capable of mounting single glazing system stracturally reinforce with hot dip galvanozed up to 50 micron of minimum thickness of 2.0mmprefebricated & welded through fusion welding the door sash shall be fitted with 12mm WPC board of ply make with clipping locking system including all cost of labour,T & P hire chargesof drilling machine,labour charges etc. as per direction of Engineer-in-Charge. |
| 51 | Providing Fitting Fixing of UPVC three track sliding window UPVC reinforced profiles 60mmx55mmx2.5mm for outer frames and 39mmx58mmx2.5mm for casement door sash profile & 74mmx60mmx2.25mm mulion profile capable of mounting single glazing system stracturally reinforce with hot dip galvanozed up to 50 micron of minimum thickness of 2.0mmprefebricated & welded through fusion welding the door sash shall be fitted with 12mm WPC board of ply make with clipping locking system including all cost of labour,T & P hire chargesof drilling machine,labour charges etc. as per direction of Engineer-in-Charge. |
| 52 | Wall painting two coat with plastic emulsion paint over a coat of priming including cost of all meterials and labour etc. (GF) |
| 53 | 1st Floor |
| 54 | 2nd Floor |
| 55 | Finishing wall surface with Acrylic wall putty( water basedof approved make and finished smooth and even to receive paintin including cost of scaffolding etc complete (GF) |
| 56 | 1st Floor |
| 57 | 2nd Floor |
| 58 | Painting two coats over a coat of primer with any approved Enamel paints including cost, conveyace of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge. (GF) |
| 59 | 1st Floor |
| 60 | 2nd Floor |
| 61 | Finishing out side wall surface with Weather Coat (I.S.I) two coats with any approved shade over a coat of priming including cost of all materials and labour (T&P) etc. complete as per the direction of Engineer-in-Charge. (GF) |
| 62 | 1st Floor |
| 63 | 2nd Floor |
| 64 | Providing and laying 60 mm thick factory made cemenkt concrete interlocking pavor block of M-30 grade made by block makine machine with strong vibratory compaction of approved size ,design and shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand ,filling the joint with fine sand etc. all complete as per the direction of engineer-in-charge. |
| 65 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete as per the direction of Engineer-in-Charge. |
| 66 | Providing and fixing 100 mm dia PVC rain water pipe with all cost of labour and materials etc. complete. |
| 67 | ELECTRICAL WORKS : - Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Group A (1.1.1) |
| 68 | -do- .... Group B (1.1.2) |
| 69 | -do- .... Group C (1.1.3) |
| 70 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 6 Modular box with base & cover (1.24.4) |
| 71 | 8 Modular box with base & cover (1.24.5) |
| 72 | 12 Modular box with base & cover (1.24.6) |
| 73 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 74 | S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE |
| 75 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX |
| 76 | S/F of computer board (Modular Type) consisting of 3 nos. of 5 amp plug and switch and 6 amp MCB, Indicator complete with wiring on 12 module M.S.box with B.k.cover(1.24.6 + 3 x (1.25.1+ 1.25.4) + 2.6.1)+Indicator |
| 77 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 ) |
| 78 | -do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 ) |
| 79 | -do- 2x4sqmm +1x1.5sqmm ( 1.8.3 ) |
| 80 | -do- 2x6sqmm +1x1.5sqmm |
| 81 | Supply, Installation testing and commissioning of 32 Amp. ICDP Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor / Havells) (2.15.1) |
| 82 | 200mmx250mmx75mm deep(1.24.9) for fixing 32Amp ICDP Main switch. |
| 83 | Supply, Installation testing and commissioning of 63 Amp. ICDP Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor / Havells) (2.15.a) |
| 84 | 250mmx300mmx100mm deep(1.24.13) for fixing 63Amp ICDP Main switch. |
| 85 | S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1) |
| 86 | S/F of following 8way single pole and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.2 |
| 87 | S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30) |
| 88 | S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28) |
| 89 | Earthing with G.I. earth pipe 3 metre long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arragement and watering pipe etc. with charcoal and salt as required.(3.2) |
| 90 | Supply and laying 6 SWG G.I wire in recess for loop earthing as required ( 3.17) |
| 91 | Supply & Fixing of 1200mm (48\\") A.C. ceiling fan(1 Star) without regulator incudig numbering of reputed mark with all accessories and connections (Make & Models :Usha-Striker Neo HS / Pollycab-Vital HS / Crompton-High Speed / Havells-Samrat ES / Anchor-Turbo speed star / Orient-Summer Breeze Pro / Great white ALDOUS) |
| 92 | S/F of electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38) |
| 93 | S/F of Fan hok S'type made of 16mm MS rod as per specificationn |
| 94 | S/F of 60 watt LED street light fitting complete with all connection.\ including fixing of bracket and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 95 | Supply, Installation, Testing and commissioning of LED bulkhead fittings( (Make: Havels / Phillps / Crompton ) |
| 96 | S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 97 | Supply of instalation, Testing commissioning of 13 Watt. LED bulb (Make: Havels / Phillps / Crompton / Polycab) |
| 98 | S/F of 15A socket on 100mm*100mm*60mm MS board for A.C (make: Legrand/Anchor/Havels/HPL) |
| 99 | S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL) |
| 100 | S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 101 | S/F of 300 exhaust fan with all accessories and connections(Make-Usha-Aero Clean plus DBB/Polycab-Fress on DBB/Cromton-Trans Air12\\" reversible/Havells-Ventil Air DS(HS)/Ancor-Anmol DelusR/Orient-Power Flow DBB |
| 102 | wiring to sub main with 1*1.5 mm2 single core multi strand copper wire for inverter wiring (1x1.5mm) |
| 103 | P/F of twin twisted cable 16/0.2 mm. (1.31) |
| 104 | P. H. WORKS : - Earth work in all kinds of soil in excavation of foundation trenches within 50 m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding o.30 in depth and as per specification and direction of Engineer in charge. |
| 105 | 2nd depth upt 3.00 mtr |
| 106 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to worksite payment of royalty, taxes etc. all complete as per direction of E.I.C. |
| 107 | Supplying all materials, labour T&P and providing c.c (1:3:6) using 4cm h.g. metal including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 108 | Supplying all materials, labour T&P and providing c.c (1:1.5:3) using 12 mm h.g. chips including watering, curing, coveyance of all materials to worksite payment of royalty, taxes etc. all complete as per specification and direction of E.I.C. |
| 109 | First Floor |
| 110 | Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks 25cmx12cmx8cm size having cs. not less than 75kg / cm2 with dimensional tolerance ± 8% in including watering,curing conveyance of all materials to worksite, payment of royalty taxes etc. all complete as per specification and direction of EIC. - In Foundation & Plinth in CM (1:4) |
| 111 | Supplying all materials, labour, T &P and providing C.C (1:1.5 :3 ) using 12mm h.g. chips for R.C.C. works including hoisting, laying, watering, curing, conveyance of all materials to worksite, curing, conveyance of all materials to worksite, payment of royalty, taxes etc, all complete as per specification and direction of E.I.C. |
| 112 | Supplying all materials, labour, T&P and providing M.S. reinforcement for R.C.C. works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite etc. complete as per directio n of E.I.C. |
| 113 | Supplying all materials, labour, T&P and providing rigid & smooth centering & shuttering for R.C.C.works including false work and dismantling them after casting including conveyance of all material, to worksite, payment of royalty, taxes etc. all complete as per direction of E..I.C.-- R.C.C.Slab |
| 114 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of E.I.C.-- 12mm thick C.P with C.M. (1:4) |
| 115 | 12mm thick C.P with C.M. (1:3) |
| 116 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 117 | Supplying all materials, labour, T&P and providing cement flush pointing to brick masonary (1:3) including watering, curing conveyance of all materials to work site, payment of royality, taxes etc. all complete as per direction of E.I.C. |
| 118 | Supplying all labour, materials T&P and fixing of R.C.C. Baffle wall pre-cast with C.C. (1:1.5:3) using 12 mm b.h.g. chips and fitted to septic tank as per P.H. Specification and direction of E.I.C. |
| 119 | Supply all materials ,labour,T&P providing fitting and fixing PVC. Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size h.g. chips all complete including watering curring,conveyance of all \\"materials to work site .payment of royality .taxes its all complete as per specification and direction of E.I.C.-11OmmXI 10mm X110mm PVC Tee |
| 120 | Supplying all materials labour T& P and providing 500 x 500 x 100mm thick RCC precast M.H cover in C.C (1:1.5:3) using 12mm h.g. chips and placing the cover on the MH/S tank & finishing smooth all complete as per specification and direction of E.I.C |
| 121 | Supplying all materials, labour, T&P and making M.S. Step Iron in 12mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 122 | Filling F&P with excavated materials, including watering and ramming as per direction of E.I.C. |
| 123 | Supplying all materials, labour T&P and fixing Ceramic Tiles in floors on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per specification and direction of EIC- Ground Floor |
| 124 | First Floor |
| 125 | Supplying all materials, labour T&P and fixing porcelain glazed tiles in dados skirting, on 12mm thick C.P. (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of Engineer-in-Charge.[Gr. Floor] |
| 126 | First Floor |
| 127 | Supplying all labour, materials, T&P, fitting and fixing of door frame made out PVC Profiles joined to the horizontal after inserting MS/FIBER L angles of size 200mm x 100mm and self tapping screw and one mtr. reinforcement providing along the sheet of the frame where the door is to be hanged. It is to be fixed to the wall with steel screw and rawal plugs all complete as per specification and direction of E.I.C. |
| 128 | Supplying all labour, materials, T&P, fitting and fixing of plastic door shutters to be made of selective PVC Profiles, The styles & rails are made of section measuring 24mm x 59mm. A lock rail is provided horizontally at the required place for strength and firmness measuring 24mm x 100mm. The panel are provided a size measuring 200mm x 20mm. All the four corners are provided with MS/Fibre L angles of size 200mm x 100mm and fitted with steel screw. The door to be hanged to the frame with the help of 100mm S.S. hinges and self tapping screw three nos. steel handle two nos. and 150mm long steel tower bolt two nos. all complete as per specification and direction of E.I.C.(Joint less Single Piece) |
| 129 | Supplying all materials, labour T&P and fixing Water closet, (Orissa pattern squating pan) duly embeded in C.C. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C.- 580mm Orissa pan (Neycer/ Cerra/Parry ware/ Hindware) |
| 130 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral S or P trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C-- E.W.C. with S trap Plain(Neycer/Cerra/ Parry ware/ Hindware) |
| 131 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Cerra/Parry ware/ Hindware) |
| 132 | Supplying all materials, labour T&P and fitting & fixing SWR ventilating pipes and fittings of the following O.D conforming to ISI No. 13592/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification, testing, e.w. in excavation in all kinds of soil and refilling of trenches as per direction of E.I.C.- 110 mm dia PVC SWR Pipes |
| 133 | 110 mm dia PVC SWR P Trap |
| 134 | 110 mm dia PVC SWR Door Tee |
| 135 | 110 mm dia PVC SWR Door Cross Tee |
| 136 | 110 mm dia PVC SWR Door Bend |
| 137 | 110 mm dia PVC SWR Plain Bend |
| 138 | 110 mm dia PVC SWR Plain Tee |
| 139 | 110 mm dia PVC SWR Offset |
| 140 | 110 mm dia PVC SWR Cowl |
| 141 | 125 mm dia C.P.grating |
| 142 | 75 mm dia SWR Pipes |
| 143 | 75 mm dia PVC SWR Plain bend |
| 144 | 75 mm dia PVC SWR Door bend |
| 145 | 75 mm dia PVC SWR Plain Tee |
| 146 | 75 mm dia PVC SWR Door Tee |
| 147 | 110 mm dia PVC SWR Nahani Trap with Jally |
| 148 | 100 x 75mm dia PVC R/S/ |
| 149 | Supplying all materials, labour T&P and cutting holes through brick/stone masonary walls for taking PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C. - 250 mm thick wall |
| 150 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C.-- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Neycer/Cerra/ Parry ware/ Hindware) |
| 151 | Supplying all materials, labour T&P and fixing padestrial for wash basin complete recessed at the back for the reception of pipe and fitting etc. all complete as per specification and direction of E.I.C. (Parrywear/Cerra/Hindware) |
| 152 | Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and direction of E.I.C.-- 600mm x 450mm B.E. Mirror (fixed type) |
| 153 | Supplying all materials, labour T&P and fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and direction of E.I.C. -- 20 mm x 600 mm long C.P Towel rail |
| 154 | C.P. Towel Ring (St.) |
| 155 | Supplying all materials, labour T&P and fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of E.I.C C.P.Soap Holder. |
| 156 | Supplying all , labour T&P and fitting, fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C -- 450x125mm size Plate Acrylic Shelf |
| 157 | Supplying all labour, T&P, materials & fixing wash Kitchen sink with M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and direction of E.I.C. -- 600mm x 450mm x 200mm Stainless Steel sink.[Including C.P. Waste & PVC Waste Pipe] |
| 158 | Supplying all materials, labour T&P and costructing gully trap chamber of the following inside size with 8cm thick R.C.C. precast cover slab in c.c. (1:1 1.5:3) using 12 mm size h.g. chips foundation concrete (1:3:6) using 40 mm size h.g. metal on bed and arround trap Fly Ash brick work in c.m. (1:6) in F&P and inside 12mm thick c.p (1:3) finished with a floating coat of neat cement including fixing 100mm size H.C.I gully trap and grating etc. all complete as per approved drawing, specification and direction of E.I.C. Inside size 250mm x 250mm gully trap Chamber |
| 159 | Supplying all materials, labour T&P and constructing Inspection chamber of the following sizes with c.c (1:3:6) using 40mm size h.g. metal on bed, Ist class Fly Ash brickwork in c.m (1:6), moulding and shaping the channel inside and benching with c.c. (1:11/2:3) using 12mm size h.g. chips 12mm thick c.p. (1:3) with punning to inside cement flush pointing (1:3) to outside R.C.C. cover slab in c.c. (1:11/2:3) using 12 mm size h.g. chips with R.C.C. m.h. cover, e.w. in excavation in all kinds of soil and refilling the cavity arround the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of the E.I.C. Inside size 760mm x 760mm x 460mm I.C. |
| 160 | Supplying all materials, labour, T&P and laying 110 mm dia SWR pipes of the following O.D conforming to IS No. 13592 and aligning to requisite gradient inside the trench encasing all round of the pipe with c.c (1:3:6) using 4 CM size h.g. metal and CC(1:3:6) with 4CM size h.g. metal in the bed of the trench including lowering the pipes to the bed of the trench, earth excavation in trenches in all kinds of soil, refilling the same in layer of 0.3 mtrs with watering and ramming, removing of surplus earth, testing of sewerage line including use of T&P as per PH Specification and direction of E.I.C.- 110 mm dia SWR Pipe Sewerage line with all round encasing (conforming to IS No. 13592) |
| 161 | Supplying all materials, labour T&P and constructing soak way pit of the following sizes with dry brick walling form bottom up to invert of inlet pipe and 1st class Fly Ash brickwork in c.m(1:6) for the remaining height at top, 12 mm thick c.p(1:4) inside and outside over masonary brickwork gravel packing in the rear of well steining R.C.C. cover slab in c.c (1:11/2:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in stoney earth and refilling the cavity around the pit & painting the iron works, watering , curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of E.I.C.- 1.20mtrs.dia x 2.0mtr.deep soak way pit |
| 162 | Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.20m dia x 2.00m deep RCC Ring Pit |
| 163 | Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical waterstorage tank confirming to IS 12701- 1996 including cutting hole through the tank and fixing MS tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to the required position including all complete as per specification and direction of EIC.(including cost of FG Over Head Tank) -- 1000 Ltrs. Capacity F.G.Over Head Tank. (on roof of Gr. floor) |
| 164 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C - 20 mm dia PVC (ASTM) Pipe [Internal] |
| 165 | 25 mm dia PVC (ASTM) Pipe [Internal] |
| 166 | 25 mm dia PVC (ASTM) Pipe) [External] |
| 167 | 32 mm dia PVC (ASTM) Pipe) [External] |
| 168 | 32 mm dia HDPE Pipe [External Including E/W] |
| 169 | Supplying all materials,labourT&P and cutting holes through brick/stone masonary walls for taking water supply pipes and fittings including making good the damages etc.all complete as per P.H specification and direction of Engineer in charge |
| 170 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. . |
| 171 | Supplying ail materials,labour,T&P and fitting & fixing brass/C.P fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H specification and direction of E.I.C.- 15mm dia. C.P Bibcock (Short body) [Plaza/ Amber Deluxe] |
| 172 | 15mm dia. C.P Bibcock (long body)[Plaza / Amber Deluxe] |
| 173 | 20mm dia.C.P Conceal stopcock [Plaza / Amber Deluxe] |
| 174 | 15mm dia.C.P Angle stopcock[Plaza / Amber Deluxe] |
| 175 | 15mm dia.C.P Pillar cock Swan Neck [Plaza / Amber Deluxe] |
| 176 | 15mm CP Two Way Bib cock[Plaza / Amber Deluxe] |
| 177 | 15mm dia C.P. Health Faucet [Plaza / Amber Deluxe] |
| 178 | 15mm dia C.P. Bib cock Elbow Action [Plaza / Amber Deluxe] |
| 179 | 15mm dia C.P Flange |
| 180 | 15mm dia C.P Extension piece. |
| 181 | 25mm dia. PVC Ball valve [Metal Ball] |
| 182 | 32mm dia. PVC Ball valve [Metal Ball] |
| 183 | Supplying all materials, labour, T&P and fitting and fixing C.P. shower with 15 mm or 20 mm inlet with C. P. shower arm including polishing all complete as per P.H. specification and direction of E.I.C. |
| 184 | Supplying all materials, labour T&P and fitting & fixing 10 Litres capacity low level cistern with a pair of cast iron of m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipe. 32 mm C.P flush bend 15mm PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C (Cerra/ Parry ware/ Hindware) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender