Tender For Upgradation Of Inner Links At Binner
Tender Value
49.31 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
2 days left
EMD
98620
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Inner Links At Binner
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead up to 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge.All kinds of soil : |
| 2 | Supply and filling of Nallah muck / quarry muck / RBM incl. spreading, ramming, and watering with consolidation 8-10 tonne capacity Road roller to the required gradient and camber incl. carriages from source to site of work complete. |
| 3 | Supplying, stacking and laying spraeding and compacting stone aggregate of 63-45mm size to WBM specifications in uniform thickness hand picking rolling with 3 wheeled road/ vibratory roller of 8-10 ton capacity in stages to proper grade and chamber applying and brooming 13.20mm type A bscreening/ binding material to fill up interstices of coarse aggragate watering and compacting to required density incl carriage of materials as involved complete. |
| 4 | Providing and laying of RCC Spun pipes including trench excavation, dressing ramming, laying nallah muck / boulders underneath the pipes and providing nallah muck / quarry muck / G.S.B cushion of specified thickness as directed by the officer In-Charge. Inclusive of all carriages, consolidation, watering etc. |
| 5 | Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars (serviceable) and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for: Complete Job.(a) Foundations, footings, bases for columns, sides of Drains blocks etc. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coats of paint all complete. Welded |
| 10 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge |
| 11 | Providing and applying tack coat using hot straight run bitumen of grade VG-10 including heating the bitumen , spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler , cleaning and preparing the existing road surface as per specifications on WBM surface @ 0.75Kg/sqm |
| 12 | Providing and laying 50 mm thick Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder @ 3.50 % and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density in patches / stretches. Complete Job |
| 13 | Providing and laying 25 mm thick semi-dense Bituminous coat using crushed stone aggregates of specified grading, premixed with bituminous binder @ 5 % and filler, transporting the hot mix to work site by tippers, laying with paver finisher to the required grade, level and alignment and rolling with smooth wheeled / vibratory rollers to achieve the desired compaction and density as per specification. Complete Job |
| 14 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender