Tender For Various Electrical Works At Lift Water Station Stage 1St & 2Nd Of Water Supply Scheme Pokhribal
Tender Value
2.17 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
10 days left
EMD
4350
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Various Electrical Works At Lift Water Station Stage 1St & 2Nd Of Water Supply Scheme Pokhribal
BOQ
| Sl. No. | Item Description |
| 1 | P/F/T/C of Motor Protection Relay (MPR)in Fully Automatic Star-Delta (FASD) Starter for a 120 HP, 415V, 3-Phase AC Induction Motor. The MPR shall have following features;Voltage Input : 30-300 V AC(L-N), 50-520V AC (L-L)• Current Input: Primary CT Ratio: 5 to 6000 A selectable• Secondary Current: AC 0.1 to 5 A • Burden: <0.2VA• Overload: up to 6A continuous • Display Output: 3 digit, 3 line • Keys: Scroll, SET, RST, INC, DEC• Auxiliary Power Supply: Universal 100-270V AC/DC, 50/60 Hz or standard 415V AC system-derived.• Mounting: Front panel flush mount or DIN rail inside the panel.• Ingress Protection: Front face IP54 minimum; Rear terminal blocks IP20.• The MPR shall provide protection against• Thermal Overload • Star-Delta Transition Spike Monitoring • Short Circuit / Over current• Phase Unbalance / Single Phasing • Phase Sequence Reversal • Ground / Earth Fault • Locked Rotor / Stall Protection |
| 2 | Providing, laying, of High-Density Polyethylene (HDPE) pipe Outer Dia 120 mm Inner Dia 108 mm inside 33/11 KV electrical substation to function as protective conduits for 11 KV output power cables. |
| 3 | Fabrication/Providing/Erecting of standalone Outdoor Type Air Circuit Breaker (ACB) Enclosure of size 0.9M x 1.2M x 0.9M standing height 2 M to accommodate 800A 3-Pole Draw Out/Fixed type ACB with following specifications/features at Lift Water Station Stage 1st of WSS Pokhribal.Configuration: Designed for 3-phase, 415V, 50 Hz low-voltage distribution. Bus Bar: Electrical Grade Aluminum Busbar of size 75x12 mm (2.4 M minimum) with insulators & fasteners.IP Rating: Minimum IP55 weather proof protection to block rain, dust, and moisture.Material: Heavy-duty mild steel (CRCA sheet, 2mm thickness & ISA 40x40x5) with weather-resistant outdoor powder coating in Siemens Grey shade.Mounting: Floor-mounted free-standing design with a rain canopy and ventilation louvers with wire mesh filters.Access: Lockable hinged front & rear doors with neoprene rubber gaskets for tight sealing. Accessories: Indicators, Multi Function Meter (L&T, Schneider), TNC Switch, Local/Remote Selector Switch, Single Pole MCB 6A (06 Nos), Internal Wiring etc. |
| 4 | Providing and fitting of XLPE insulated, 3C x 2.5 sqmm, 1100V grade industrial unarmoured Copper control cable as per IS 7098 between Main Control Panel and the Out Door ACB (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab or equivalent) |
| 5 | • Providing, fabrication, fitting and testing of Electrical Grade Aluminum Busbar of size 50x12 mm (5.5 kg) on the outgoing circuit of 1000A Control Panel of the Lift Station Pokhribal Stage 1st to facilitate the installation of existing 1000A ACB. The job includes cutting, profiling, bending, drilling tapping. And P/F of adequately spaced insulators to provide structural bracing against heavy electromagnetic repulsive forces during a short-circuit fault event. |
| 6 | Providing and crimping of 1000 sqmm Aluminum tube lugs (Dowells/ Action/ or any other reputed make) with tapping, insulation to Aluminum Cable from 1MVA transformer to ACB at Pokhribal Lift Station 2nd. |
| 7 | Providing/Fitting of heavy duty 1000 sqmm corrosion resistant aluminium alloy solderless clamps (bolted type)to Aluminium Cable from 1MVA transformer to ACB at Pokhribal Lift Station 2nd. |
| 8 | P/F of 630 mm sq straight through copper ferrules/lugs for jointing of copper conductor laid between ACB and the Main Control Panel inside the Pump House at Pokhribal Lift Station 2nd. |
| 9 | Providing and crimping of 120sqmm Copper lugs (Dowells/ Action/ or any other reputed make) with tapping, insulation at Pokhribal Lift Station 1st. |
| 10 | P/F single-core 1 mm sq flexible flame-retardant (FR/FRLS) copper cable for providing power supply and interlocking of solenoid valves of 5 cusec VT Pumping units at Pokhribal Lift Station 1st. |
| 11 | Design/Manufacture/Supply/Installation/Testing/Commissioning of 20 A, 12-72 V multi-battery charger featuring a solid, heavy-duty build with double-wound copper transformer and a full-wave bridge rectifier capable of charging multiple batteries simultaneously in a series configuration to ensure high-efficiency power conversion. The charger must adhere to the following design specifications/parameters:• Input Voltage Range: 180V to 230 V AC Single Phase (50Hz) to withstand severe grid voltage fluctuations.Output Voltage Profile: Nominal output12V to 72V DC (Selectable via Rotary Switch Taps)• Rated Output Current: 20 Amperes Max• (Selectable via Rotary Switch Taps)Charging Capacity : 1 to 6 Batteries (12V each) in seriesTransformer Type : Double-Wound Heavy Duty Copper WindingRectifier Circuit : Full-Wave Silicon Bridge RectifierProtection System : Overload &accidental short-circuit protection via DC Miniature Circuit Breaker (MCB)Display Gauges : Analog Ammeter (for tracking active current)Enclosure Material : Powder-coated mild steel / metal heavy-duty chassisStandard Accessories : 2-meter heavy-duty connecting cables with brass-terminal copper alloy clamps |
| 12 | P/F/I/T/C of High Tension (HT) CT/PT operated Energy tri vector meter of specifications 33kV/√3/110V/√3, -/5A, 50Hz 0.5s accuracy class, DLMS/COSEM compliant for measuring parameters like kWh, kVAh, kVArh &Maximum Demand Indicator etc. with built-in optical port (for local downloading via MRI) paired with an isolated RS-232 or RS-485 serial port for remote Automated Meter Reading (AMR/AMI) systems and advanced anti-tamper logic logging events like reverse current, phase failure, voltage unbalance, and magnetic influence . The meter shall have Ingress Protection of IP 51 and shall conform to IS 14697, IS 15959, IEC 62052-11 / IEC 62053-22 standards. The meter shall be provided along with the optical lead. |
| 13 | Earthing of 630 kVA substation at Stage 1st lift Station Pokhribal: Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials and earth Chamber made of brick masonry with RCC slab cover. |
| 14 | Shifting of 80 kVAR capacitor bank from lift station 1st and installation, testing and commissioning of the same at lift station stage 2nd of WSS Pokhribal. |
| 15 | Providing and fitting of XLPE insulated, 1100V 3.5-core 185 mm sq industrial armoured aluminum cable as per IS 7098 for installation of 80 kVAR capacitor at Lift Station Stage 2nd of WSS Pokhribal. (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab/equivalent) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender