Tender For Upgradation & Renovation Of Main Building In Lokayukt Residence At Booty Road, Ranchi
Tender Value
97.04 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
3 days left
EMD
1.94 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation & Renovation Of Main Building In Lokayukt Residence At Booty Road, Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Dismantling RCC work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 5 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge. |
| 6 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratchesetc. complete |
| 7 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5 km for all lifts, complete as per directions of Engineer-in-charge. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 9 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 10 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash andmullion/coupler (where ever required) extruded profiles having minimumwall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mmfor Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel sectionmade of required shape & size as per CPWD Specification, uPVCextruded glazing beads, interlocks and lnline sash adaptor (whereever required) of appropriate dimension, EPDM gasket, hardware, SS304 grade fasteners of minimum 8 mm dia with countersunk head,comprising of matching polyamide PA6 grade sleeve for fixing frameto finished wall as per IS 1367 : Part 1 to 1 4 , plastic packers, plasticcaps and necessary stainless steel screws etc. Profile of frame, sash &mullion (if required) shall be mitred cut and fusion welded/mechanicallyjointed duly sealed at all corners, including drilling of holes for fixinghardware and drainage of water etc. After fixing frame the gap betweenframe and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of approved size and quality, all complete asper approved drawing conforming to CPWD specification & direction ofEngineer-in-Charge. Section of steel reinforcement and cross sectionsof uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unitwith/ without high performance coatings as per design requirements andconforming to IS: 3548 & IS: 16231 shall be paid separately.Note:- Structural design proof checked from a GovernmentEngineering Institute, to be provided by the manufacturer for(i) Sites with basic wind speed > 45 m/sec as per IS 875 -- Part 3(ii) Sites with structure height more than 20m for all wind speedsTwo track two panels sliding window with Aluminium channelfor roller track, wool pile, nylon rollers with SS 304 body.Using R2 series with frame (40 mm & above)x (40 mm & above) & sash (25 mm & above)x (50 mm & above) with zinc alloy (zamak)powder coated touch locks with hook (Heightupto 1 . 2 metre). |
| 12 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash andmullion/coupler (where ever required) extruded profiles having minimumwall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mmfor Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel sectionmade of required shape & size as per CPWD Specification, uPVCextruded glazing beads, interlocks and lnline sash adaptor (whereever required) of appropriate dimension, EPDM gasket, hardware, SS304 grade fasteners of minimum 8 mm dia with countersunk head,comprising of matching polyamide PA6 grade sleeve for fixing frameto finished wall as per IS 1367 : Part 1 to 1 4 , plastic packers, plasticcaps and necessary stainless steel screws etc. Profile of frame, sash &mullion (if required) shall be mitred cut and fusion welded/mechanicallyjointed duly sealed at all corners, including drilling of holes for fixinghardware and drainage of water etc. After fixing frame the gap betweenframe and adjacent finished wall shall be filled with weather proof siliconsealant over backer rod of approved size and quality, all complete asper approved drawing conforming to CPWD specification & direction ofEngineer-in-Charge. Section of steel reinforcement and cross sectionsof uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unitwith/ without high performance coatings as per design requirements andconforming to IS: 3548 & IS: 16231 shall be paid separately.Note:- Structural design proof checked from a GovernmentEngineering Institute, to be provided by the manufacturer for(i) Sites with basic wind speed > 45 m/sec as per IS 875 -- Part 3(ii) Sites with structure height more than 20m for all wind speedsThree track three panels sliding window with two glazed& one wire mesh panels with Aluminium channel for rollertrack, wool pile, nylon rollers with SS 304 bodyUsing R3 series with frame (98 mm & above) x(40 mm & above) & both glazed and fly screensash (30 mm & above) x (55 mm & above)with zinc alloy (zamak) powder coated handleon every glazed panel along with multi-pointlocking system. (Height upto 1.8m). |
| 13 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid .in basic item):With float glass panes of 5.0 mm thickness (weight not lessthan 12.5kg/sqm) |
| 14 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 1 2 mm thick bed of cement mortar 1 :. 3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 15 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 1 2 mm thick cement mortar 1 : 3 (1 cement: 3 coarse sand) including pointing in white cementmortar 1 : 2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :White sand stone - Exposed face machine cut and tablerubbed with rough backing 40 mm thick |
| 16 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 : 4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be donewith the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of size of Tile 800 x 1200 mm |
| 17 | Providing and laying Vitrified tiles in floor in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS:15622, of approved brand & manufacturer, in all coloursand shade, laid on 20 mm thick cement mortar 1 : 4 (1 cement: 4 coarsesand) jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cutwith the zero chipping diamond cutter only . Laying of tiles will be donewith the notch trowel, plier, wedge, clips of required thickness, levelingsystem and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size of Tile 800 x 1200 mm |
| 18 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 : 4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry@ 3.3 kg/ sqm including pointing the joints with white cement and matchingpigments etc., complete. |
| 19 | Providing and fixing 1 8 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 : 4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm |
| 20 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 1 8 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 : 4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab of colour Black, Cherry/RubyRed or equivalent |
| 21 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 22 | Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 1 8 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1 : 4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete asspecified and as directed by the Engineer-in-Charge.1 8 mm thick Italian Marble stone slab, Perlato, Rosso verona,Fire Red or Dark Emperadore etc |
| 23 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofin up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia. G . I plain/bitumen washers complete but excluding thecost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured.They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.2 mm thick flat |
| 24 | Providing and fixing false ceiling at all heights including providing andfixing of frame work made of special sections, power pressed from M.S.sheets and galvanized with zinc coating of 120 gms/sqm (both sideinclusive) as per IS : 277 and consisting of angle cleats of size 25 mmwide x 1 . 6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centreto centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the anglehangers of 25x1 0x0.50 mm of required length with nuts & bolts of requiredsize and other end of angle hanger fixed with intermediate G.I. channels45x15x0.9 mm running at the spacing of 1200 mm centre to centre, towhich the ceiling section 0.5 mm thick bottom wedge of 80 mm withtapered flanges of 26 mm each having lips of 1 0 . 5 mm, at 450 mm centreto centre, shall be fixed in a direction perpendicular to G.I. intermediatechannel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick27 mm high having flanges of 20 mm and 30 mm long, the perimeter ofceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,with 25 mm long dry wall screws @ 230 mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with the help ofdry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing andfinishing to a flush finish of tapered and square edges of the board withrecommended jointing compound , jointing tapes , finishing with jointingcompound in 3 layers covering upto 150 mm on both sides of joint and twocoats of primer suitable for board, all as per manufacturer's specificationand also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitably fixed,all complete as per drawings, specification and direction of the Engineerin Charge but excluding the cost of painting withFully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 1 5 % perforated area withperforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, with all4 sides tapered and backed by acoustical tissue with NRCvalue not less than 0.60 |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 26 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 27 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 28 | Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kg/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litre/10 sqm, complete as the direction of Engineer -in-Charge. |
| 29 | Finishing walls with textured exterior paint of required shade .Old work (Two or more coats on existing cement paint surfaceapplied @ 3.28 ltr/10 sqm. |
| 30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including priming coat of exterior primer applied @ 0.90litre/10 sqm) |
| 31 | Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) onexisting cement paint surface |
| 32 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 33 | Water proofing for Old and New Roof Slab:- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed, ready to use, acrylic modified flexible material applied with. brush, roller or spray for water proofing coating as per manufacturer specifications with following steps:(a) surface preparation:-Providing and cleaning of concrete surface to remove dust, oil, grease Including removal of existing loose paint/ coating, and cement laitance by cleaning with compressed air & water jet including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to Identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika India Pvt.Ltd. / MYK Schomberg Dr Fixit/Fosroc or equivallent. Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with 150mm X 150 mm fillet of mortar (Cement: sands 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry of acrylic polymer. Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same withcement slurry including all material, labour, tools complete. (b)1st Coat Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application, 45 gsm of Fibre glass cloth to lay when the first layer is still green 1st coat should be applied @1.50 kg/SqmU/coat. For the AND purpose of measurement the entire treated surface will be measured.\\"(c) 2nd Coat :-To apply the 2nd coat of two component acrylic modified, ready to use, flexible cementitious material right angle to the 1st coat over the glass fibre laid surface, 2nd coat should be applied @0,7 kg/ Sqmt/coat. For the purpose of measurement the entire treated surface will be measured.\\" After three days of drying the 2nd coat, the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C. The waterproof coating to be protected from damage before screed over it. Water proofing Brand:- Sika Topseal 109hl /Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2K/MYK Aquafin TG Product Performance- Chemical Base Part A: Acrylic copolymer, Part B: Specially graded cementitious powder- Density 1.6 kg/l (mixed density) at +27°C Tensile Strength -2 N/mm2 after 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Strength -2 N/mm2 (concrete failure) (According to ISO 4624) Slant-Shear Bond Strength-4 N/mm2 (According to FIP 5.15) (According to ASTM D 2370) Elongation at Break -35% without Fibre Cloth and 20% with Fibre Cloth (According To ASTM D 2370)(d) Protection of treated surface with PCC The treated surface should be covered with 25mm/50mm PCC of M-20 grade(1:1,5:3) with proper slope (1:120) towards the rain outlets in alternate panels of 2 mt x 2mt keeping 6 mm gap between the panel joint. Integral water proofing admixture conforming to IS 2645 @ of 100 ml per bag of cement to be added in the screed concrete (paid separately for this items). All comers shall be just leveled with the screed concrete to ensure smooth discharge VERNMES of water-the peripheral gaps between pvc pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture Insensitive epoxy putty of Sika India Pvt.Ltd./MYK Schomberg / Dr Fixit/Fosroc .For the purpose of measurement the entire treated surface will be measured.\\" (e)Groove of PCC surface should be filled with Polysulphide Sealant. (Paid Separately). Brand- Sika India Pvt.Ltd. /MYK Schomberg/Dr Per M AND Fixit/Fosroc Warranty for five years. |
| 34 | Covering of treated surface with PCC :- Providing 25 mm thick Cement Concrete M20(1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm |
| 35 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen@ 1.7 kg/sqm). |
| 36 | CARRAIGE OF MATERIALS |
| 37 | Sand - 8km |
| 38 | Chips - 22 km |
| 39 | Metal - 22 km |
| 40 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever requiredKitchen sink with drain board510x1040 mm bowl depth 225 mm |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm nominal outer dia Pipes |
| 42 | 20 mm nominal outer dia Pipes |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work.25 mm nominal outer dia Pipes |
| 44 | 32 mm nominal outer dia Pipes |
| 45 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 75 mm diameter |
| 46 | 110 mm diameter |
| 47 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm |
| 48 | 110 mm |
| 49 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Coupler 75 mm |
| 50 | Coupler 110 mm |
| 51 | Single pushfit Coupler 75 mm |
| 52 | Single pushfit Coupler 110 mm |
| 53 | Single tee with door 75x75x75 mm |
| 54 | Single tee with door 110x110x110 mm |
| 55 | Single tee without door 75x75x75 mm |
| 56 | Single tee without door 110x110x110 mm |
| 57 | Bend 87.5° 75 mm |
| 58 | Bend 87.5° 110 mm |
| 59 | Shoe (Plain) 75 mm |
| 60 | Shoe (Plain) 110 mm |
| 61 | Point wiring in PVC conduit, with modular type switch - Point wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required.Group - C |
| 62 | Wiring for twin control light point with 1.5 sq.mm FRPVC insulated copper conductor single/core cable in surface/recessed PVC conduit 2 way modular type switch phenolic laminated sheet cover suitable size M.S. box and earthing the paint with 1.5 sq.mm FRPVC |
| 63 | Wiring for light/power plug with 2 x 4 sq.mm FRPVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 No. sq.mm FRPVC insulated copper conductor single core cable for loop earthing as required |
| 64 | Wiring for Curcuit submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC sonduit as required.2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. earth wire |
| 65 | 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire |
| 66 | 2x6 Sqmm + 1x6 sqmm earth wire (For ESSENTIAL TPN DB ) |
| 67 | 4x10 Sqmm + 2x10 sqmm earth wire (For Normal TPN DB) |
| 68 | TV Wiring in Existing Conduit:-TV Cable in Existing Conduit: Supplying and drawing co-axial TV cable RG-6 grade copper conductor, PE insulated, with PVC sheath in the existing surface/recessed PVC conduit as required, |
| 69 | S/F PVC conduit - Supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case recessed conduit as required.20mm |
| 70 | 25 mm |
| 71 | S/F PVC /G.I. boxes - Supplying and fixing PVC/G.I. box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc. as required.75mm x 75mm x 50mm deep/(4\\" x 4\\") |
| 72 | S/F Modular type switch/socket on the existing switch box including connection etc. as required.5/6 amp. Switch & 3 pin 5/6 amp. Socket/outlet |
| 73 | l5/16 amps, one way switch |
| 74 | 3 pin 5/6 amp. Socket/outlet |
| 75 | l5/16 amps, 6 pin socket outlet |
| 76 | Telephone socket outlet |
| 77 | TV antenna socket outlet |
| 78 | S/F Modular type electronic fan regulator -Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 79 | S/F Modular Boxes, base & cover plate (Used for TV and Tele.) :-Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78 mm x 78 mm x 45 mm) |
| 80 | 4/5 module $$m x l40mm x 50mm |
| 81 | 6 module (78mm x 205mm x 50mm) |
| 82 | S/F suitable size G.I. box with modular plate and cover in front on surface or in recess including P.F. 3 pin 5/6 amp. Modular socket outlet and 5/6 amp. Modular switch connection painting etc. as required |
| 83 | S/F suitable size G.I. box with modular plate and cover in front on surface/recess including P/F 6 pin 15/16 amp. And 5/6 amp modular socket outlet and 15/16 amps. Modular switch connection as painting etc. as required |
| 84 | S/F 3 pin 5 amp ceiling rose on the existing junction box wooden block including connection etc. as required |
| 85 | S/F Elecronic musical Call bell :-Supplyng and fxing Electronic musical call bell single phase. 230 volt,Complete as required |
| 86 | ITC fluorescent fitting directly on surface - Installtion, testing and commissioning of Pre-wired, fluorescent fitting/compact fluorescent fitting of all type, complete with all accessories and tube etc. directly on ceiling/wall, including connection with 1.5 sq.mm. FR PVC insulated, copper conduit. |
| 87 | I.T.C of ceiling fan including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq.mm FRPVC with 1.5 sq.mm. FRPVC insulated copper conductor single core cable etc. as required |
| 88 | S/F T.P. MCB DB - Supplying and fixing following way, three pole and netural, sheet MCB ditribution board, 415 volts, on surface/recess, complete with tinned copper busbar, netural busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).4 way (4 + 12), Double door, Horizontal type |
| 89 | 6 way (4 + 18), Double door, Horizontal type |
| 90 | S/F 'C' series, MCB - Supplying and fixing following 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connection, testing and commossioning etc. as required.6/32A Single Pole |
| 91 | 40 amps, TPN |
| 92 | 50/63 amps, TPN |
| 93 | S/F following rating single pole 240 volts isolator in the existing MCB DB complete with connection testing and commissioning etc. a srequired.40 amp |
| 94 | 63 amp |
| 95 | Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to13:374,.2019 including wiring the down rods of ndard length (upto 30cm) with l.Ssq.mm. FR PVC insulated, copper wire uitable for 230V 50H2, single phase supply etc. complete as required. 1200mm (48\\") BLDC 5star rating 32W Ceiling Fan |
| 96 | Supply 15\\" (380mm) metal exaust fan. |
| 97 | S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230V 50H2, single phasesupply etc. comPlete as required20/22W LEDTube light |
| 98 | Supplying and fixing recess mounted 18 watt LED vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required |
| 99 | 3 W COB based Round LED light with multiple beam angles (36 degree) |
| 100 | 6 W COB based Round LED light with multiple beam angles (36 degree) |
| 101 | 9 W COB based Round LED light with multiple beam angles (36 degree) |
| 102 | 12 W COB based Round LED light with multiple beam angles (36 degree) |
| 103 | 15 W COB based Round LED light with multiple beam angles (36 degree) |
| 104 | Supply Copper Tube of size 1/4\\" for aplit ac unit 1/1.5/2/3 Tr capacity including nitride rubber |
| 105 | Supply Copper Tube of sizeSf 5/8\\" for split ac unit 1/1.5/2/3 n capacityincludine nitride rubber insulation |
| 106 | Supply 5 KVA wall mounted automatic voltage stablizer from range 1.40V to280V |
| 107 | Supply Drain Pipe for AC |
| 108 | Supply Outdoor stand for 1.5Tr Split AC |
| 109 | Supply LED strip light 24volt DC with IP:65 rated in different colours of length5 mtr. and power 5W per mtr. including driver. IS:10322partl/ section 7 |
| 110 | Providing and fixing door shutter paneling with 6mm HDMR board Pasting with one side 1.5 mm laminate and another side PVC laminate with material and labour all complete as per building specification and direction of E/I. |
| 111 | Providing and fixing door shutter paneling with 6mm HDMR board Pasting with both side 1.5 mm laminate with material and labour all complete as per building specification and direction of E/I. |
| 112 | Providing and fixing window Frame paneling with 6mm HDMR board Pasting with both side 1.5 mm laminate with material and labour all complete as per building specification and direction of E/I. |
| 113 | Providing and fixing door shutter paneling with 6mm HDMR board Pasting with one side PVC laminate and another side Duco Paint with material and labour all complete as per building specification and direction of E/I. |
| 114 | Providing and fixing door shutter paneling with 6mm HDMR board Pasting with one side 1.5 mm laminate and another side Duco Paint with material and labour all complete as per building specification and direction of E/I. |
| 115 | Providing and fixing door shutter paneling with 6mm HDMR board Pasting with both side Duco Paint with material and labour all complete as per building specification and direction of E/I. |
| 116 | Providing and fixing window shutter paneling with 6mm HDMR board Pasting with both side Duco Paint with material and labour all complete as per building specification and direction of E/I. |
| 117 | S/F/F all height wall paneling of 19 mm thick water proof Century Marine ply IS:710, ISI Mark, 6mm PVC louvers all complete as per building specification and direction E/I |
| 118 | S/F/F all height wall paneling of 19 mm thick water proof Century Marine ply IS:710, ISI Mark,Termites proof. over with 1.5 mm laminated sheet all complete as per building specification and direction E/I |
| 119 | S/F/F all height wall paneling of 19 mm & 12mm thick water proof Century Marine ply IS:710, ISI Mark,Termites proof. over with 6mm HDMR board and Duco paint all complete as per building specification and direction E/I |
| 120 | S/F/F all height wall paneling of 19 mm thick water proof Century Marine ply IS:710, ISI Mark,Termites proof. over with 1.5 mm Laminates and Corian sheet all complete as per building specification and direction E/I |
| 121 | S/F/F all height wall paneling of POP, all complete as per building specification and direction E/I |
| 122 | Supplying, fiting, fixing 2 Feet Deep Cupboard/ Wardrobe with 19 mm thick water proof Century Marine ply IS:710, ISI Mark,Termites proof and stick to both side 1.5mm thick decorative laminated including all cost of materials, labour , taxes all complete as per building specification and direction of E/I. |
| 123 | S/F/F Wardrobe/ Cabinet of 19 mm thick water proof Century Marine ply IS:710, ISI Mark,Termites proof. all material and labour all complete as per building specification and direction E/I |
| 124 | S/F/F Wardrobe/ Cabinet of 19 mm thick WPC Board, ISI Mark with over PVC laminate. all material and labour all complete as per building specification and direction E/I |
| 125 | Supplying, fiting, fixing 2 Feet Deep Cupboard/ Wardrobe with 19 mm thick water proof Century Marine ply IS:710, ISI Mark,Termites proof and stick to one side 1.5 mm thick and other side 0.8 mm thick decorative laminated including all cost of materials, labour , taxes all complete as per building specification and direction of E/I. |
| 126 | Providing & Fixing of modular kitchen cup board of steel rack hing basket with ply facing provision of all fitting of modular kitchen do -do |
| 127 | S/F/F all height wall dressing of 19 mm thick water proof Century Marine ply IS:710, ISI Mark,Termites proof. over with mirror all complete as per building specification and direction E/I |
| 128 | Providing and fixing PVC centre Bite with all material and labour all complete (including all type fitting) as per building specification and direction of E/I. |
| 129 | Providing and fixing POP centre Bite with all material and labour all complete (including all type fitting) as per building specification and direction of E/I. |
| 130 | Supplying and Fixing of Door and Window febric Curtain complete linning and stitching with track in the direction of E/I. |
| 131 | Supplying and Fixing of Roller Blinds of approves size in all colours and shades to be fixed in jumbs .complete in the direction of E/I.. |
| 132 | Supplying and Fixing of Remote Control Roller Blinds of approves size in all colours and shades to be fixed in jumbs .complete in the direction of E/I. |
| 133 | Supplying and Fixing of Vertical wall Gardens C (3'0\\" X 9'-6\\" -2Nos)complete linning and stitching with track in the direction of E/I. |
| 134 | Supplying and Fixing of Corian sheet complete in the direction of E/I. |
| 135 | Supplying and Fixing of Wall Paper complete in the direction of E/I. |
| 136 | Supplying and Fixing 2 way bib cock with wall flange (ORP-SSF-10041PM) |
| 137 | Supplying and Fixing Pillar Cock( (ORP-SSF-10001PM) |
| 138 | Supplying and Fixing Single level wall mixer 3-in-1 system with provision WITH hand shower & overhead shower complete(ORP-SSF-10125PM) |
| 139 | Supplying and Fixing Bib cock with flange(ORP-SSF-10037PM) |
| 140 | Supplying and Fixing angular stop cock with flange (ORP-SSF-10053PM) |
| 141 | Supplying and Fixing Towel reck 600mm long (AKP-CHR-35781PS) |
| 142 | Supplying and Fixing Towel ring (AKP-CHR-35721P) |
| 143 | Supplying and Fixing toilet roll holder (AKP-CHR-35751P) |
| 144 | Supplying and Fixing Soap dispenser with glass bottle (CPA-CHR-1135) |
| 145 | Supplying and Fixing Hand shower(health faucet) with 8mm dia ,1M long flexible tube & wall hook (ALD-CHR-573)) |
| 146 | Supplying and Fixing Over head shower 300x300mm squar shape (OHS-1639) |
| 147 | Supplying and Fixing RIMLESS BLIND WALL HUNG WC (ACS-WHM-87953NBIUF) |
| 148 | Supplying and Fixing Single piece concealed cistern body with floor mounted frame (JCS-WHT-2431FP) |
| 149 | Supplying and Fixing Control plat kubix (JCP-CHP-352415) |
| 150 | Supplying and Fixing Counter Top besin (ALS-WHT-85601) |
| 151 | Supplying and Fixing Full Pedestal Besin (LAS-WHT-91301) |
| 152 | Supplying and Fixing Mirror 630 x 445mm size AKP-CHR-35795) |
| 153 | Add 18 % GST (in Basic Rate must fill 12) |
| 154 | Add 1% Labour Cess (in Basic Rate must fill 1) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender