Tender For Special Repair To Sewage Line , Manhole And Septic Tank At Ge Sagar
Tender Value
30 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Sewage Line , Manhole And Septic Tank At Ge Sagar
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 2 | All as per item No. 01 above but depth of excavation exc 1.50 M but n'exc 3.00m |
| 3 | Removal of excavated material (soil) to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed. |
| 4 | Returning filling in excavated material including spreading, levelling, watering and well ramming in layer n.exc 25 cm thick complete all as specified and directed. |
| 5 | Demolition and breaking up drain pipes (salt glazed ware)/ RCC/HDPE pipe of 150mm bore/dia pipe set in cement mortar, including bedding, hunching pcc etc, complete all as specified and directed. |
| 6 | All as per Srl item No 05 above but 200mm bore / dia pipe. |
| 7 | All as per Srl item No 05 above but 300mm bore / dia pipe. |
| 8 | S&F HDPE double wall corrugated (DWC) sewage pipe of 150 mm internal bore, SN-8 grade, as per IS 16098 Part-II 2013 laid in trenches, jointed and tested as per manufacturer's instruction complete all as specified and directed |
| 9 | S&F HDPE double wall corrugated (DWC) sewage pipe of 200 mm internal bore, SN-8 grade, as per IS 16098 Part-II 2013 laid in trenches, jointed and tested as per manufacturer's instruction complete all as specified and directed |
| 10 | S&F HDPE double wall corrugated (DWC) sewage pipe of 300 mm internal bore, SN-8 grade, as per IS 16098 Part-II 2013 laid in trenches, jointed and tested as per manufacturer's instruction complete all as specified and directed |
| 11 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 12 | M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundations/ mass concrete complete all as specified and directed. |
| 13 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 14 | M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed |
| 15 | M&L for Brickwork with sub- class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed |
| 16 | M&L Brick work with subclass 'B' old size bricks in one brick thick honey comb walling built in CM 1:4 complete all as per specified and directed. |
| 17 | M&L for Loose filling with Broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells etc complete all as per specified and directed. |
| 18 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone walls, surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 19 | M&L for cutting into existing manholes for connecting new or old drains of dia 150mm / 200mm, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed |
| 20 | Cleaning of Septic tank of any capacity and in any location by mechanical means using truck mounted vacuum suction pump/machine, capacity not less than 15 cum/hr, taking off complete sludge including water and cleaning the tank with entire satisfaction of Engr-in-charge and deposited outside the MOD land complete all as specified and directed.Note: All T&P required for completing the job shall be arrange by contractor and rates shall be deemed included in quoted unit rates (ii) Net volume (internal dimension and fluid height shall be measured for calculating cum qty) |
| 21 | Demolition of cement concrete (reinforced) below or above the ground floor, not exc 15cm thickness (reinforcement cut as required to facilitate demolition) such as in cooking platform, chajja etc complete all as specified and directed. |
| 22 | M&L for RCC( Nominal mix), 1:2:4 type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls complete all as specified and directed.. . |
| 23 | M&L for use and waste of form work to soffits of suspended slabs, flat or curved roof slabs, floor slabs, n'exc 200mm thick, fair finished concrete surface complete all as specified and directed.. |
| 24 | M&L for use and waste form work to edges of concrete flats, treads, breaks in floors, window cills, concrete rail-ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide; rough finished concrete surface, complete all as specified and directed. |
| 25 | M&L for mild steel TMT bars 10 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 26 | M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gde Fe complete all as specified and directed. |
| 27 | M&L for mild steel round bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending as in manhole covers handles, steps, rungs etc complete all as specified and directed. |
| 28 | M&L for dewatering of soak well of any dia and depth completely by pumping out the water by mechanical means and removing it to nearby nala complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender