Tender For special Rep/Replacement Of Existing Internal Aluminium Wiring To Copper Wiring At Certain Md Accn At Af Stn Agra
Tender Value
67.96 Lakhs
Estimated cost
Bid Submission
10 Oct 2026
14 days left
EMD
1.26 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Rep/Replacement Of Existing Internal Aluminium Wiring To Copper Wiring At Certain Md Accn At Af Stn Agra
BOQ
| Sl. No. | Item Description |
| 1 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. |
| 2 | M&L for point wiring complete for one light/fan/ exhaust fan point controlled by one, one way 5 Amp switch with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including anodised pressed steel concealed terminal switch boxes not less than 1.20 mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed. |
| 3 | All as per srl item No 2 above but for call bell point complete all as specified and directed. |
| 4 | All as per srl item No 2 above but with cable with 2.5 sqmm size for 5 pin 6 amps socket outlet independent board complete all as specified and directed. |
| 5 | All as per srl item No 2 above but with cable with 2.5 sqmm size for 3 pin 6 amps socket outlet on the same board with other switch complete all as specified and directed. |
| 6 | All as per srl item No 2 above but for one light point controlled by two Nos 2 way switches complete all as specified and directed. |
| 7 | All as per Item No 02 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm and green colour earth cable of size 2.50 Sqmm. |
| 8 | M&L for point wiring complete with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area single core drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, complete including 4 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including cutting chases for concealed piping and making good disturbed surface to match the existing surface complete all as specified and directed. |
| 9 | S&F in replacement switch piano flush type one way 6 amps SP 230 volts complete all as specified and directed. |
| 10 | S&F in replacement switch piano 2- way, 6 amps flush type 230 volts complete all as specified and directed. |
| 11 | S&F in replacement bell push flush type 6 amps SP 230 volts complete all as specified and directed. |
| 12 | S&F in replacement switch in replacement piano flush type one way 16 amps SP 240 volts complete all as specified and directed. |
| 13 | S&F in replacement socket outlet 2 in 1, 3 pin 5/6 amps flush type 240 volts complete all as specified and directed. |
| 14 | S&F in replacement socket outlet 2 in 1, 6 pin, 5 and 16 amps flush type 230 volts complete all as specified and directed. |
| 15 | S&F in replacement bell ding dong AC , 230 VOLTS, single pole complete all as specified and directed. |
| 16 | S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed. |
| 17 | S & F in replacement lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed. |
| 18 | S&F Single pole 20 amp ,230 volt and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB |
| 19 | S&F in replacement existing U/S light fitting with energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed.Note:- Power factor should not be less thtn 0.95 |
| 20 | S & F in replacement of old U/S bulk head light LED light fitting 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size |
| 21 | Supply and fixing LED in replacement of old U/S light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 22 | Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 23 | S&F in replacement ceiling fan regulator, electronic stepped type 5 stage speed regulation, ISI marked complete all as specified and directed. |
| 24 | M&L for taking down carefully existing ceiling fan/exhaust fan for greasing / oiling of ball bearings / bushes and making it for smooth and noise free operation and re-fixing after providing new fan clamp, nuts/bolts, washers, down rod as required and provision of 3 core copper flexible cable of size 1.0 Sqmm from ceiling rose to fan connector complete with writing of MES No. on the fan surface all as specified and directed. |
| 25 | Supply and fixing sheet metal enclosures distribution boards, single door three phase 415v 8ways vertical TPN DB for comprising three phase four wire 300Amp rated copper strip bus bar of appropriate capacity complete all as specified and directed. And comprising of the following:-(a) MCCB four pole 125Amps AC 415volts 25KA-01Nos as incoming.(b)16 Nos MCB spn 63 amps, C curve rupturing capacity 10KA as outgoing.Note:- (i) The DB shall be flush fixedd and making good the distrubed surface matching with existing specifications.(ii) All connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin/bottle type thimble-properly crimped.(iii) All vacant holes of the DB shall be provided with blank plates of appropriate size.(iv) Double continuous earth wire shall be provided for each three phase DB from earthing mainss dolly.(v) MCBs should have a same make as of DB. |
| 26 | S&F in replacement of sheet metal enclosure distribution box suitable for MCB'S 8 way SPN 240 volts with 200 Amps rated bus bar double door complete including connecting up and making good distrubed surface complete all as specified and directed. |
| 27 | “Supply and fixing amp rating 240V, 10KA ‘B ’ curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. SPN 40 to 63 AMP.” |
| 28 | “Supply and fixing amp rating 240V, 10KA ‘B’ curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. SP 6 to 32 AMP.” |
| 29 | “Supply and fixing amp rating 240V, 10KA ‘B’ curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. SP 40 AMP.” |
| 30 | S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20 mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 31 | M&L for removal of existing old unsv earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender