Tender For Annual Civil Maintenance Work For Hwbf Talcher Plant Site For The Year 2026-27.
Tender Value
53.89 Lakhs
Estimated cost
Bid Submission
23 Sep 2026
9 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anugul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Civil Maintenance Work For Hwbf Talcher Plant Site For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and lift upto 1.5 m, including re-filling around them and in plinth with excavated selected soil in layers not exceeding 150 mm thickness, watering and ramming etc., disposing of all surplus earth to a lead of 2km. complete as per specifications and as directed by the Engineer-in-charge. |
| 2 | Providing and filling sand in plinth,under floors including watering,ramming,consolidating and dressing,etc. all complete as per drawings,specifications and as directed by the Engineer-in-charge.. |
| 3 | Providing and laying plain cement concrete 1:4:8( 1 cement :4 sand :8 graded stone aggregate) with 40mm nominal size stone aggregate of approved quality in foundations,plinth,and under floor including ramming,leveling,curing,formwork wherever necessary etc. all complete as per drawings,specifications and as directed by the Engineer-in-charge.. |
| 4 | Providing and laying plain cement concrete 1:2:4( 1 cement :2 coarse sand :4 graded stone aggregate) with 20mm, 10mm & 6mm nominal size stone aggregate of approved quality in foundations,plinth,and under floor including ramming,leveling,curing,formwork wherever necessary etc. all complete as per drawings, specifications and as directed by the Engineer. |
| 5 | Providing and laying plain cement concrete 1:1.5:3( 1 cement :1.5 coarse sand :3 graded stone aggregate) with 20mm and 10mm nominal size stone aggregate of approved quality in foundations,plinth,and under floor including ramming,leveling,curing,formwork wherever necessary etc. all complete as per drawings, specifications and as directed by the Engineer-in-charge. |
| 6 | Providing and laying reinforced cement concrete of grade 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) with 20mm nominal size stone aggregate of approved quality in roofs, slabs, lintels, beams, chajjas, columns, walls, vertical/horizontal fins and all kinds of maintenance works including drip moulds, centering, shuttering, scaffolding, consolidating, curing etc., all complete at all levels as per specifications and as directed by the Engineer-in-charge but excluding cost of reinforcement. |
| 7 | Providing ,laying and fixing in position TMT/HYSD bar of grade Fe-500D or more reinforcement for RCC in situ work including cost of straightening,cutting,bending & binding with 16 gauge MS annealed binding wire , cement mortar spacer blocks etc. all complete as per drawings,specifications and as directed by the Engineer-in-charge.. |
| 8 | Providing and laying Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average compressive strength in super structure in cement mortar 1:6 including cost of scaffolding, raking of joints, curing etc. all complete at all levels as per drawing, specifications and as directed by the Engineer-in-charge.. |
| 9 | Providing and applying 12mm thick plaster in cement mortar 1:6 ( 1 cement: 6 fine sand ) proportion over brick masonry walls and concrete surfaces at all heights,including racking of joints,hacking of concrete surfaces, curing,scaffolding,providing grooves etc. all complete as per drawings,specifications and as directed by the Engineer-in-charge.. |
| 10 | Providing and applying two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) , having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour, of approved manufacturer and shade over already distempered / primed scrapped surfaces of walls in residential quarters and public buildings including preparation of surface by scrapping and applying wall putty (as per the requirement) for distempering, cost of Brush, Sand paper, Wall Putty, Scaffolding etc. all complete at all levels as per specifications and as directed by the Engineer-in-charge. |
| 11 | Providing and applying Synthetic Enamel Paint of approved brand and manufacture of required colour to give an even shade. one or more coats on old work including preparation of surface etc., all complete as per specification and as directed by the Engineer-in-charge.. |
| 12 | Providing, laying and fixing 110mm dia nominal bore PVC rain water pipe of approved quality including jointing with seal ring with inlet assembly, shoe and jalli cover at inlet etc. including all other specials as required and fixing with necessary MS holder over wooden packing to wall or concrete surface and filling the joints with cm 1:2, curing, scaffolding etc. all complete up to a height of 18m all as per drawings, specifications and as directed by the Engineer-in-charge.. |
| 13 | Maintenance of CI valves of 8'' dia. including dismantling , cleaning of internal parts, greasing of valve spindles, replacement of damaged parts and ensuring smooth operation of valves etc., all complete at all levels as per specifications and as directed by the Engineer-in-charge.. |
| 14 | Supply of Gate valve of different sizes having MOC cast iron for smooth operation of plant and as directed by Engineer-In-Charge. (Note : For example 4\\" dia valve will execute 4 quantity) |
| 15 | Providing and fixing white vitreous china orissa pattren W.C pan of size 580x440mm with integraltype foot rests with 100 mm sand cast iron P or S trap , 10 liter low level white P.V.C flushing cistern with manually controlled device ( handle Lever ) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. and as directed by the Engineer-in-charge. |
| 16 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and as directed by the Engineer-in-charge. |
| 17 | Providing and fixing White Vitreous China Flat back wash basin size 550x400mm with single 15mm C.P brass pillar tap with CI brackets,15 mm flexible inlet pipe ,and 32 mm cp brass waste coupling with standard pattern,including painting of fittings and brackets etc. all complete as directed by the Engineer-in-charge.. |
| 18 | Providing and fixing 10 liters capacity low level white high density polythelene/polypropelene flushing cistern of Parry ware or Hindustan or Jaguar ware with ISI mark, providing all connections with new fixtures of approved brand including removing of old damaged cistern, making good the wall etc, all complete at all levels as per specifications and as directed by the Engineer-in-charge.. |
| 19 | Providing and fixing fixtures of approved quality with ISI mark, on existing drinking water pipe line net work and sanitary fixtures after removing the old damaged fixtures including cost of fixtures, scaffolding, cutting and making good the wall/floor etc., all complete at all levels as per specifications and as directed by the Engineer-in-charge.. |
| 20 | 15mm dia Nominal bore brass bib cock of ISI marked and minimum weight 400 grams. |
| 21 | 15mm dia Nominal bore brass stop cock of minimum weight 400 grams. |
| 22 | 15mm dia Nominal bore gun metal full way valve with wheel. |
| 23 | 20mm dia Nominal bore gun metal full way valve with wheel. |
| 24 | 25mm dia Nominal bore gun metal full way valve with wheel. |
| 25 | 15mm dia Nominal bore brass float valves with brass rod and PVC ball. |
| 26 | 20mm dia Nominal bore brass float valves with brass rod and PVC ball. |
| 27 | 32 mm dia CP brass waste coupling. |
| 28 | 100 mm dia CP brass grating for Nahani trap. |
| 29 | 15mm dia nominal bore CP brass pillar cock of ARC/CERA/MARK brand. |
| 30 | 15mm dia, 450mm long PVC connectors with brass nuts and washers. |
| 31 | 32mm dia PVC drain pipe for wash basin/ sink |
| 32 | 40mm dia PVC drain pipe for wash basin/sink |
| 33 | CI brackets for cistern, wash basin, sink etc., |
| 34 | White or black shade solid plastic seat and lid for EWC with CP brass hinges and washers |
| 35 | C.P. brass waste 40 mm dia. |
| 36 | Providing and fixing GI pipe (Medium quality) confirming to IS 1239 complete with ISI marked GI fittings for all works after removing the old damaged pipes including cost of pipes, fixtures, trenching and re-filling, testing of joints etc., all complete at all levels as per specifications and as directed by the Engineer-in-charge.. |
| 37 | 15mm dia nominal bore |
| 38 | 20mm dia nominal bore |
| 39 | 25mm dia nominal bore |
| 40 | 32mm dia nominal bore |
| 41 | 50 mm dia Nominal bore. |
| 42 | Providing and fixing ISI marked GI fittings of approved quality on existing drinking water pipe line net work after removing the old damaged fixtures, scaffolding, cutting and making good the wall/floor, testing of joints etc., all complete at all levels as per specifications and as directed by the Engineer-in-charge.Elbows, Nipple, Coupling, Tee,Union, Reducing Elbow, Reducers, Reducing Tee, Plug etc. |
| 43 | 15mm dia |
| 44 | 20mm dia |
| 45 | 25mm dia |
| 46 | Cleaning and desilting of RCC under ground water tank of capacity 150 cum, thorough brushing of side walls and floor of tank using 20 kg bleaching powder, flushing out the tank with fresh water, disposing of silt to a lead of 100 mtrs. including taking all safety measures during work etc., all complete as directed by the Engineer-in-charge.. |
| 47 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts, GI strips 25mmx3mmx1000mm @1m. c/c and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required at a height of 15m in asbestos roof top including necessary scaffolding & appropriate safety precautions as per specifications and as directed by the Engineer-in-charge. |
| 48 | Providing all tools, tackles, man power for disposal of garbages/debris/cut grass surplus earth from road side berms, and different type of officce waste, plant waste materials, and disposal of the same in a mini truck including loading, transporting, and unloading, etc., up to a lead of 2 KMS complete as directed by the Engineer-in-charge. |
| 49 | Providing and fixing white vitreous china laboratory sink of size 600x450x200mm with all fittings and fixtures, like G.I line connections, inlet 15 mm dia flexible pipe,C.P brass long body tap ,C.P brass stop cock, cp brass waste coupling, 32 mm dia waste pipe, drain pipe etc., as required and as directed by the Engineer-in-charge.. |
| 50 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) as required and as directed by the Engineer-in-charge. |
| 51 | Providing and laying coloured CC inter locking paver block (80mm thick, M35) over sand/crusher dust of thickness 100mm all complete as per the specification and as directed by the Engineer-in-charge. |
| 52 | Felling / branch trimming trees of the following girth (measured at a height of 1met above ground level)including cutting of trunks and branches, removing the roots and stacking of serviceable materials and disposal of unserviceable material and as directed by the Engineer-in-charge.. |
| 53 | beyond 30cm girth upto and including 60cm girth |
| 54 | beyond 60cm girth upto and including 120cm girth |
| 55 | beyond 120cm girth upto and including 240cm girth. |
| 56 | Demolishing cement concrete nominal concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of material within 2km lead as per direction of Engineer-in-charge. |
| 57 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 2km lead as per direction of Engineer-in-charge. |
| 58 | Demolishing stone rubble masonry / Brick masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 2km lead as per direction of Engineer-in-charge. |
| 59 | Dismantling steel work Channels, angles, tees and flats in single sections including dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. |
| 60 | Dismantling tile work thickness of tiles 10 mm to 25 mm in floors and roofs laid in cement mortar including stacking material within 500 metres lead and removing unserviceable material with in 2.km lead as per direction of Engineer-in-charge. |
| 61 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 2KM metres lead as per direction of Engineer-in-charge. |
| 62 | Supplying and finishing walls with Acrylic Smooth exterior paint of required make like ASHIAN/BERGER/NEROLAC/ANY APPROVED BRAND and shade New work/old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including cleaning of surface and removing loose particles etc all complete as per the direction of Engineer-in-charge. |
| 63 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-in-charge. |
| 64 | Providing & fixing UV stabilised fiberglass reinforced plastic 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) sheet up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers, GI strips 25mmx3mmx1000mm @1m. c/c complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified, including cutting sheets to size and shape wherever required up to height of 60m including necessary scaffolding & appropriate safety precautions as per drawings, specifications and as directed by the Engineer-in-charge. |
| 65 | Charges for servicing fixtures such as bibcock, pillarcock, stop cock, shower rose, drain pipes of sink, wash basin etc., re-fixing the same fixtures after servicing, including providing nylon washers for cocks, ensuring smooth operation/free flow of water etc., all complete at all levels as directed by the Engineer-in-charge.. |
| 66 | Providing corrugated G.S. sheet roofing 0.63 mm thick with zinc coating not less than 275 gm/ m² including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer-in-charge. |
| 67 | Providing and fixing precoated galvanised steel sheet roofing accessories Gutter (600 mm over all girth) 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete as per the direction of Engineer-in-charge. |
| 68 | Providing and Lettering with black Japan paint of approved brand and manufacture as per the direction of Engineer-in-charge. |
| 69 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. complete as per the direction of Engineer-in-charge. |
| 70 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge.-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per the direction of Engineer-in-charge. |
| 71 | Providing and fixing self cleaning PVC trap of 100 mm inlet and 100mm outlet of approved quality including cost of cutting, removal of old damaged trap, making good the walls and floors, scaffolding, curing etc., all complete at all levels as per specifications and as directed by the Engineer-in-charge. |
| 72 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used as per the direction of Engineer-in-charge. |
| 73 | Structural steel repair work work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-in-charge. |
| 74 | Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS : 2202 ( Part - 1) non-decorative type, core of block board construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face venners on both face of shutter including 3nos of hinges and refixing of all existing MS Oxidised fittings and fixture including removal of old damaged shutters etc.and necessary repairs of frame, all complete and as directed by Engineer-in-charge. |
| 75 | Providing and fixing 600x450 mm beveled edge mirror of superior glass ( of approved quality ) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per the direction of Engineer-in-charge. |
| 76 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. specifications and as directed by the Engineer-in-charge.. |
| 77 | Providing and fixing in position anodised aluminium fixed window /ventilators /doors with hydraulic door closer using extruded sections of approved manufacturers viz. Jindal/Indal, frames, mullions, shutters fabrication & fixing etc. as per relevant I.S. specifications,aluminium frame work of approved manufacturers for partition wall using prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS 12823 grade i type ii,in paneling fixed in aluminium partition frames with stainless steel screws etc including 4mm thick approved quality transperenent glass of modiguard or equivalent make with PVC lining/rubber gasketting to ensure air tightness. complete as per architectural drawings and direction of Engineer-in-charge. |
| 78 | Providing and fixing standard anodized aluminum hanging floor door stopper(Twin rubber stopper) ISI marked of approved quality with necessary screws complete.(twin rubber stopper) as per the direction of Engineer-in-charge. |
| 79 | Providing and fixing mortise lock (Godrej-satin model) six lever with handle set etc. complete as per drawings, specifications and as directed by the Engineer-in-charge.. |
| 80 | Providing and fixing drawer lock or almirah lock (Godrej 5 tin mechanism wardrobe lock and nuvo lock) for table and almirah of Godrej and removal of old, damaged, or jammed locks from existing Godrej steel almirahs and office tables without causing damage to the surrounding metal or wood body complete as per specifications and as directed by the Engineer-in-charge. |
| 81 | Providing and fixing 4.00 mm thick plain glass panes with necessary beadings wherever required including removal of broken glass and beading as per the direction of Engineer-in-charge. |
| 82 | Supplying and fixing of vertical blinds (Fabricated) to existing windows (As fixed in existing windows of Technical building) and as directed by the Engineer-in-charge.. |
| 83 | Providing and fixing of Stainless steel wire guage (jali) (Grade-304) aperture 1.4 mm and 0.40mm in door and window shutters including dismantaling of old jali, provision of bidding as per the requirement and disposal of dismantaled item upto 2 km.all complete as per specification and as directed by Engineer-in-charge. |
| 84 | Planning the shutters of doors, windows, ventilators, cupboards, refixing the same on the existing frames or in other frame including ensuring smooth operation of shutter, necessary screws, scaffolding etc., all complete at all levels as per specifications and as directed by the Engineer-in-charge.. |
| 85 | Providing and fixing 8 mm nominal thickness (weight not less than 20.00 kg/sqm) plain glass panes for office Table top with necessary beadings, chamfering work at corner to remove sharp edges,etc wherever required including removal of broken glass and beading as per the direction of Engineer-in-charge. |
| 86 | Data operating cum civil supervision job for all the items covered in this schedule of quantity as per the direction and to the satisfaction of Engineer-in-Charge. |
| 87 | Providing and fixing tiled false ceiling of GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation,and backed with a black Glass fiber acoustical fleece .suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors, removing of old false ceiling etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 88 | Providing, making and fixing in position of wood work in frame and shutters of doors, windows, ventilators, cupboards etc., with sal wood after removing the old damaged/worn-out wooden shutters as a new work or repairs to old shutters, providing as a new work or repair to old shutters, providing and applying one coat of approved wooden primer and two coat synthetic enamel paint, including scaffolding, refixing of old glass panes / plywood panes in the repaired shutters, refixing of repaired shutters on existing frames with new screws etc., all complete at all levels as per specifications and as directed by the Engineers -in-charge. |
| 89 | Providing and fixing of 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. |
| 90 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 91 | Providing and fixing plain lining 12mm thick commercial ply conforming to IS : 1328 BWR type with necessary screws/nuts & bolts/nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge. |
| 92 | Providing and fixing sunmaica of 1mm thick confirming to IS : 2046 with all necessary synthetic adhesive, trimming, finishing and cleaning, etc on ply confirming to IS : 1328 BWR type for repair and maintenance of office tables,etc complete as directed of engineer-in-charge. |
| 93 | Providing and fixing of Jet/Hand spray of JAGUAR/PERRYWARE/ANY APPROVED BRAND in existing WC including all fittings & fixtures ,repairs if any ,etc and as directed by engineer-in-charge. |
| 94 | Providing and fixing of PTMT Liquid Soap Container of 400 ml capacity including all necessary fittings & fixtures, screws/nuts,etc complete as per direction of Engineer-in-charge. |
| 95 | Removing of old existing false flooring and Providing and fixing of new removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:450 mm Finished Floor Height (FFH). sqm |
| 96 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per directionof Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender