Tender For Maintenance/ Upgradation Of Road No. 03 Chainage No. 0 To 1350 M At I.A. Kosi Kotwn Extension -2Nd Distt- Mathura.
Tender Value
4 Crore
Estimated cost
Bid Submission
18 Sep 2026
5 days left
EMD
9.46 Lakhs
Bank guarantee accepted
Document Fee
8533
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance/ Upgradation Of Road No. 03 Chainage No. 0 To 1350 M At I.A. Kosi Kotwn Extension -2Nd Distt- Mathura.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at ONIC, and compacting with smooth wheel roller to achieve the desired density. |
| 2 | Providing and laying Spreading and compacting graded stone agrregate to wet mix mecadam specification including premixing the material with water at OMC in mechanical mix plant carriege of mixed materialby site laying in uniform layers with paver in sub /base course on well. |
| 3 | Providing and applying tack with bitumen VG-10 using Bitumen ,pressure distriubutor @ 0.2kg per sqm on the prepared bitumenous /granular surface cleaned with mechanical broom. |
| 4 | Providing &laying dense garded bitumenous macadam with higher capacity batch type HMP using crushed aggregates of specified grading premixed with the bituminous VG-30 binder @4 percent by weight pf total mix and filler ,transporting the hot mix to work site ,laying with the hydrostic paver finisher with sensor control to the required grade , level and alignment rolling with smooth wheeled vibratory and tendam rolloers to achieve the desired compaction a per MoRT&H Specification Clouse 505 Complete in all respects. |
| 5 | Providing and applying Prime Coat with bitumen VG-10 on prepared surface of granular base including clearing of raod surface and spraying primer at the rate of .70 Kg/sqm using mechanical meanc |
| 6 | Providing & laying bituminous concrete with higher capacity batch type hot mix plant using crushesed aggregate of specified grading premixed with bituminous binder @ 5% of mix and filler , transporting the hot mix to work site laying with a hydrostatic paver with sensor control to the required grade ,level and alignment ,rolling with smooth wheeled , vibratory and tandem rollers achieve the desired compaction as MoRT&H Specification Clouse 507 complete in all respects.(40 mm Thick BC layer) |
| 7 | Road Marking with Hot Applied Thermoplastic Compound with. Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads 0? 250 gms per sqm area, thickness of 2.5 Sqm mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level ,uniform and free from streaks and holes . |
| 8 | Reflective Raised Pavement Markes (cat eye /Road studs)Supply and fixing of raised pavement markers with the made of plastic body of RPM/road stud shall be moulded from ASA (acylic Styrene Acrylonirile) HIPS (High-Impact Polystyrene) or Acryloniitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mouled of methyl methecrylate conforming to ASTIM 0788 of equivalent. The slop or retro-reflecting surface shall preferably be 35-1-5 degree to base and the area of each retro -reflecting surface shall not be less than 13.00 sq om. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture, epоху Installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer In addition, a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged get worn or lose their reflectivity compared to stipulated standards, the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer at his own cost The rate shall include all materials, labour, T&P, transportation, installation and incidentals all |
| 9 | Supply & Laying of I shaped (Zigzag) precast lnterlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50k9) lncluding 0.30mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. 80 mm (Rubber moulded Coloured)Rate as per SOR Agra Circle SI No. 6.7 (1500) |
| 10 | PCC 1:3:6 In Foundation Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing |
| 11 | Reinforced Cement Concrete (M-20) in sub-structure complete as Drawing and Technical Specifications Clause 1500, 1700 & 2100 |
| 12 | Steel reinforcement R.C.C work ready to use \\"cut and bend \\"rebars of approved make from factory/workshop to construction site including placing in position and biding all complete upto plinth level. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender