Tender For Providing Fire Alarm System In Isbt, Sector-43, Chandigarh.
Tender Value
23.74 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
7 days left
EMD
47500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Fire Alarm System In Isbt, Sector-43, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | DSR item No.1.17 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 2 | 3 x 1.5 sq.mm |
| 3 | DSR item No. 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 4 | 25 mm |
| 5 | DSR item No. 15.15 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 6 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 7 | DSR item No. 28.1.2 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 8 | DSR item No. 28.1.3 Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 9 | DSR item No. 28.1.6 Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 10 | DSR item No. 28.1.8 Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required. |
| 11 | DSR item No. 28.1.11 Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. (Please refer DNIT for complete specification of item no.8) |
| 12 | DSR item No. 28.2.1 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. |
| 13 | Two Loop Panel. |
| 14 | DSR item No. 28.2.4 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. |
| 15 | DSR item No. 28.2.6 Supplying, installation, testing & commissioning of intelligent addressable programmable sounder complete as required. |
| 16 | DSR item No. 28.2.14 Supplying, installation, testing & commissioning of addressable manual call point complete as required. |
| 17 | DSR item No. 28.2.17 Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required. |
| 18 | DSR item No. 28.2.19 Supplying, installation, testing & commissioning of fire fighter phone jack complete as required. |
| 19 | DSR item No. 28.3.3 Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required. |
| 20 | DSR item No. 28.5.2 Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS/HFFR outer sheath complete as required. |
| 21 | DSR item No. 28.5.3 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. |
| 22 | speaker cable Single pair, 2-core, 1.5 sqmm |
| 23 | Supplying, Installation, Testing and Commissioning of 480 Watt Power Amplifier suitable for Public Address/Voice Evacuation System, operating on 24 V DC battery supply with maximum ±10% voltage variation, having frequency response of 60 Hz to 15 kHz (+1 dB/-3 dB), total harmonic distortion less than 3% at rated output power at 1 kHz, balanced XLR input with input impedance of 20 kΩ and input sensitivity of 1 Volt (microphone input), and signal-to-noise ratio greater than 80 dB. The amplifier shall be provided with all necessary accessories and in-built protection against overload, short circuit and overheating, complete with mounting, interconnections, testing and commissioning at site to the entire satisfaction of the Engineer-in-Charge. The item includes all labour, tools, tackles and consumable materials required for proper installation and operation. Make: Bosch / Crown / Honeywell / Bose only. |
| 24 | Supply and installation of Red/ Green LED Laser etched emergency exit signage‘s double sided pendant type made out of powder coated MS housing and etched acrylic sheet indicator with reflective light source> 2W LED, Emergency Backup of minimum 4 hours, 6V 3.2 AH SMF/ SLA battery, SMPS Power supply suitable for operation on 230 AV 50 Hz AC supply as per the requirement at all prominent locations to guide the way out of the building to the building users in case of fire. The size of the letter should be sufficient for visibility of the people as per NBC-2016. The exit sign board should be of THORN/ PROLITE/ AUTO GLOW/ AUTOLITE/ GLOWLITE/ HONEYWELL make only. |
| 25 | Supply, installation, testing and commissioning of 2x10 watt wall/ceiling mounted industrial Double Beam emergency LED light with exit sign board. The fitting should have CRCA steel housing, 5700K color Temperature, 50000 burning hours, minimum emergency backup of 4 to 5 hours. The fitting should be fully automatic i.e. automatic on in case of normal supply failure and automatic off as power resumes. The battery should have inbuilt protection for over, under charge and short circuit protection. The job also includes the cost of testing commissioning and making connections with 3x1.5 copper conductor from adjacent light point, other petty material and labour etc. as required to complete the job to be entire satisfaction of Engineer-in-Charge. Make: Mr. Lite/ Agni/ Edvent only. |
| 26 | Supplying, Installation, Testing and Commissioning of tabletop gooseneck unidirectional condenser microphone having gooseneck length between 400 mm to 500 mm, suitable for speech and public address applications, operating on a voltage range of 12 V to 48 V DC with current consumption less than 8 mA, sensitivity of 0.7 dB SPL, total harmonic distortion less than 0.6% at maximum input level, equivalent input noise of 28 dB SPL(A) with signal-to-noise ratio of 66 dB(A) referenced to 1 Pa, frequency response from 100 Hz to 16 kHz, and output impedance of 200 ohms. The microphone shall be complete with desktop base, connection accessories, mounting hardware and all other necessary components required for proper operation. The item includes all labour, tools, tackles, testing and commissioning at site to the entire satisfaction of the Engineer-in-Charge. Make: Bosch / Sennheiser / Shure only. |
| 27 | Labour charges for horizontal boring 1 Mtr. Below ground level for laying of DWC pipe including cost of 2 Nos. pit digging and refilling complete in all respects to entire satisfaction of the Engineer in Charge of the work. |
| 28 | The Annual Maintenance Contract (AMC) for complete fire alarm system i.e. conventional and automatic shall be on a comprehensive basis, including maintenance of the complete system along with all necessary spare parts, and no additional or hidden charges shall be payable during the contract period. Preventive maintenance of the system shall be carried out once every fortnight to ensure proper functioning. The supplier shall attend all service/repair calls within two (2) hours from the time of lodging the complaint, and all defective equipment shall be repaired on the same day at the purchaser’s site. (Please refer DNIT for complete specification of item no.23) |
| 29 | 2nd year |
| 30 | 3rd year |
| 31 | 4th year |
| 32 | 5th year Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender