Tender For special Repair And Replacement Of Against Ber Exhaust Fans And Ceiling Fans And 3 Ph Exhaust Fan At Sma Kadamba Vanam, Inhs Patanjali & Bv Yard And special Repairs Of Vertical Waste Pipeline, Gt, Inspection Chamber Manhole And Storage Well
Tender Value
45.90 Lakhs
Estimated cost
Bid Submission
03 Oct 2026
21 days left
EMD
91800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair And Replacement Of Against Ber Exhaust Fans And Ceiling Fans And 3 Ph Exhaust Fan At Sma Kadamba Vanam, Inhs Patanjali & Bv Yard And special Repairs Of Vertical Waste Pipeline, Gt, Inspection Chamber Manhole And Storage Well At Inhs Patanjali.
BOQ
| Sl. No. | Item Description |
| 1 | S&F ceiling fans complete with blades, down rods (2 ft to 3 ft) as per site requirement, electronic regulator and accessories, 230 V, 1200 mm sweep. Minimum air delivery 210 CFM with service value 6.00 BEE. Five-star rated with brushless direct current (BLDC) motor, complete all as specified and directed including taking down the existing ceiling fan and depositing the same in MES store. |
| 2 | S&F heavy-duty exhaust fan, 95 W, AC single phase, 230 V, size 300 mm, 1400 RPM (steel body), IP55, including fixing louvers/shutters complete with frame for exhaust fan and air delivery 1950 m³/hr, aerodynamically balanced impellers and blades, connected with flexible cord of size 23/0/0076 stranded copper conductor, PVC insulated, of length not less than 0.7 m, complete all as specified and directed including taking down the existing exhaust fan and depositing the same in MES store. |
| 3 | S&F 3-phase heavy-duty industrial duct type axial fan of size 450 mm, 380 W, 1400 RPM (steel body) with aluminium casting blade including fixing louvers/shutters, duct mounted type complete with frame with air delivery 4000 CFM, aerodynamically balanced impellers and blades connected complete all as specified and directed by Engr-In-Charge, including taking down existing industrial duct type axial fan and depositing the same in MES store. |
| 4 | S&F 3-phase, 0.5 HP motor Direct-On-Line (DOL) starter, 1–1.6 Amp, for industrial exhaust fans, complete in repair all as specified and directed. |
| 5 | S&F 2.5 sqmm, 4-core FR flexible copper cable, fixed in wall properly with clamps and all connected accessories, complete in repair all as specified and directed. |
| 6 | Dismantling of concrete block walling, brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles etc all as specified and directed. |
| 7 | M&L for providing precast cement concrete block masonry with solid blocks exceeding 10 cm in width, type C-1, using 20 mm graded stone aggregate, set in cement mortar (1:6), complete all as specified and directed. |
| 8 | Description all as per Item No. 07 above, but using serviceable precast blocks obtained from Item No. 07 above instead of new precast blocks, complete all as specified and directed. |
| 9 | Demolition of RCC of any description and in any position not otherwise specified, and removing debris outside MD land, complete all as specified and directed. |
| 10 | M&L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate), as in cover slabs (for manholes, etc.), shelves, and similar articles with plain faces, set in cement mortar (1:6), including necessary formwork, complete all as specified and directed. Note: Reinforcement shall be measured and paid separately. |
| 11 | S&F TMT steel bars of 10 mm diameter and over, cut to length, bent to the required shape, including cranking, bending, spirally for hoops for columns, hooking ends, and binding with mild steel wire (annealed) not less than 0.9 mm diameter or securing with clips, complete all as specified and directed. |
| 12 | Taking down cement plaster of any description on brick, stone, or concrete surfaces, including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. |
| 13 | M&L rendering 15 mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4), mixed with WPC as per manufacturer's instructions, finished even and smooth without using extra cement (WPC paid under separate supply item), complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 14 | Supply only integral waterproofing compound (ISI marked), complete all as specified and directed. Please Enable Macros to View BoQ information |
| 15 | Supply only integral waterproofing compound (ISI marked), complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender