Tender For Operation And Maintanance Of Pipeline And Water Supply From Ohsr To Various Villages And Dhanies Originating From Roopangarh Pumping Station All Type Of Prevetive And Break Down Maintenacne Of Pipe Lines, For The Cluster Under Fcp Arain-Ki
Tender Value
70.69 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
12 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ajmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Operation And Maintanance Of Pipeline And Water Supply From Ohsr To Various Villages And Dhanies Originating From Roopangarh Pumping Station All Type Of Prevetive And Break Down Maintenacne Of Pipe Lines, For The Cluster Under Fcp Arain-Kishangarh
BOQ
| Sl. No. | Item Description |
| 1 | Maintenance of pipelines irrespective of size & material which includes Repairing of Bursts & leakages pollution control, survey & removal of choking, disconnection of illegal connections, Collection & recording minimum 10 nos. residual chlorine samples during daily supply timings, interconnections and all works related to pipeline network in existing distribution /rising main pipe lines of all sizes by digging out suitable size of pit in soft and loose soil/ hard soil including cutting of Black top, WBM & CC top of road of any size at work site. This will also include cutting of pipe ends, fixing of pipe piece with jointing material to make repair leak proof and refilling of pit by excavated sand by ramming it at sides of pipes and upto ground level. For entire job contractor will use their own T & P. Contractor with his own resources shall arrange de-watering,JCB & Tractor compressor if any and restore any amenity at his own cost damaged while performing the work in this item. The work includes daily patrolling and repair the leakages within stipulated time and complete maintenance of pipe line network of rising and distribution pipeline network within the scope of work for per km pipe line per month. Jointing material shall be provided by the department. |
| 2 | 201km to 300 km - Three fitter-II & Six beldar |
| 3 | Daily/ periodical operation of valves at supply times for specified by department per sluice valve per month. (Valve rod and cap to be arranged by contractor) |
| 4 | 80-300mm |
| 5 | Running expenditure of pumphouses which includes complete operation of pumpmotor , maintenance of log-books as directed by Engineer-in-charge, general upkeeping of premises, security arrangements, Regular chemical dosing in CWR, cleaning and desilting of SR/CWR/SUMP once every six months, daily valve operation under the Campus of pump house and all other works as mentioned in scope of work in tender document for per pump house per month. (power supply minimum 16 hrs)(excluding repairing of pumping machinery etc.) |
| 6 | Above 100 HP to 200 HP |
| 7 | Rewinding of three phase squirrel cage induction motor of Monoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge. |
| 8 | 7.5 HP |
| 9 | 10.00 HP |
| 10 | 20.00 HP |
| 11 | SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK PUMPSET (MOTOR + PUMP) |
| 12 | Connection Plates |
| 13 | up to 10 HP |
| 14 | 10 HP to 20 HP |
| 15 | Cooling Fan |
| 16 | up to 10 HP |
| 17 | 10 HP to 20 HP |
| 18 | GM/SS bush |
| 19 | Upto 10 HP |
| 20 | 10 HP to 20 HP |
| 21 | Mechanical reconditioning of Bearing sheet |
| 22 | Upto 10 HP |
| 23 | 10 HP to 20 HP |
| 24 | Mechanical reconditioning ofImpeller sheet and Key way slot |
| 25 | Upto 10 HP |
| 26 | 10 HP to 20 HP |
| 27 | Oil seal |
| 28 | Upto 10 HP |
| 29 | 10 HP to 20 HP |
| 30 | Labour charge for opening and fitting of pump sets |
| 31 | Upto 10 HP |
| 32 | 10 HP to 20 HP |
| 33 | Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (including cost of copper wire) 'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump sets and transportation to and fro from installation site complete as per direction of engineer in charge at site. |
| 34 | Above 25.00 HP but upto 30.00 HP |
| 35 | Above 45.00 HP but upto 50.00 HP |
| 36 | SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP) |
| 37 | Connection Plates |
| 38 | 20 HP to 30 HP |
| 39 | 30 HP to 50 HP |
| 40 | Cooling Fan |
| 41 | 20 HP to 30 HP |
| 42 | 30 HP to 50 HP |
| 43 | Fan Cover |
| 44 | 20 HP to 30 HP |
| 45 | 30 HP to 50 HP |
| 46 | G.M./SS Gland Guide Bush |
| 47 | 20 HP to 30 HP |
| 48 | 30 HP to 50 HP |
| 49 | Shaft with Sleeve Chuck Nut |
| 50 | 20 HP to 30 HP |
| 51 | 30 HP to 50 HP |
| 52 | Shaft Chuck Nut |
| 53 | 20 HP to 30 HP |
| 54 | 30 HP to 50 HP |
| 55 | G.M. Neck Ring |
| 56 | 20 HP to 30 HP |
| 57 | 30 HP to 50 HP |
| 58 | Bush Shaft Sleeve of G.M. |
| 59 | 20 HP to 30 HP |
| 60 | 30 HP to 50 HP |
| 61 | G.M. Gland Cover |
| 62 | 20 HP to 30 HP |
| 63 | 30 HP to 50 HP |
| 64 | JOB WORK FOR REPAIR OF PUMP MOTOR |
| 65 | Bearing Housing (rebuilding, turning & finishing) |
| 66 | 20 HP to 30 HP |
| 67 | 30 HP to 50 HP |
| 68 | Labour Charges for Dismantling & Assembling of Pump |
| 69 | 20 HP to 30 HP |
| 70 | 30 HP to 50 HP |
| 71 | Coupling with stud and rubber bush |
| 72 | 20 HP to 30 HP |
| 73 | 30 HP to 50 HP |
| 74 | Supply & Fixing of tyre coupling sets according to relevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge. |
| 75 | Type 15 Nos. set |
| 76 | Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC. |
| 77 | 6310 or equivalent size |
| 78 | 6312 or equivalent size |
| 79 | 6317 or equivalent size |
| 80 | NU319C or equivalent size |
| 81 | Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. |
| 82 | Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. |
| 83 | M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender