Tender For Procurement Of Furniture For District Prison At Randha, D&Nh (2Nd Call)
Tender Value
76.08 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
1.52 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dadra and Nagar Haveli → Dadra and Nagar Haveli
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Procurement Of Furniture For District Prison At Randha, D&Nh (2Nd Call)
BOQ
| Sl. No. | Item Description |
| 1 | EQ BedProviding and supplying EQ Bed of overall size 2050 mm (L) × 973 mm (W) × 720 mm (H), complete as specified. The headboard shall be fabricated from 18 mm thick pre-laminated particle board with all exposed edges finished using 2 mm thick PVC edge banding. The bed leg frame shall be manufactured from MS box sections of 50 × 25 mm, 1.2 mm thick. Internal support members shall consist of 19 × 19 mm MS box sections, 0.9 mm thick, while the headboard frame shall be made from 25 × 25 mm MS box sections, 0.9 mm thick. The mattress holding bracket shall be fabricated from 0.6 mm thick CRCA sheet, and the mattress support platform shall be constructed from 1.0 mm thick CRCA sheet. The 18 mm pre-laminated particle board shall be in Shade 4501, Make: Godrej (Shirval) or approved equivalent. The powder coating finish shall be as follows: Bed leg frame: Matt Taupe White, Ref. No. 9001904, powder coated to a minimum dry film thickness of 50 ± 10 microns. Mattress frame: EPP FR TEX Milky White – 20K, Ref. No. 9003456, powder coated to a minimum dry film thickness of 50 ± 10 microns. All remaining metal components: S/G Charbrown, Ref. No. 9000605, powder coated to a minimum dry film thickness of 50 ± 10 microns. The item shall include all necessary hardware, fittings, fasteners, accessories, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 2 | Recta Workstation (1800 × 750 mm) with ERU (1200 × 600 mm) – UPBEATProviding and supplying Recta Modular Workstation (UPBEAT Series) of overall size 1800 mm (L) × 750 mm (W) with Extended Return Unit (ERU) of size 1200 mm (L) × 600 mm (W), complete with all accessories and fittings as specified. The workstation shall be a modular desk-based system with an overall working height of 750 mm. The supporting D-Fine Plus legs shall be of rectangular profile, fabricated using Argo Shield technology and designed to provide a finished worktop height of 750 mm from floor level. The worktop shall be manufactured from 25 mm thick pre-laminated particle board with all exposed edges finished with 2 mm thick PVC edge lipping. The workstation shall be provided with an integrated wire management system, comprising a single power box with raiser suitable for manager modules and single tables, complete with 8 + 3 module Anchor Roma electrical fittings or approved equivalent. The power box shall be provided with a soft-closing access flap with brush strip for efficient cable routing and management. The metal modesty panel shall be fabricated from 0.8 mm thick CRCA steel sheet and securely fixed to the worktop using 3 mm thick HR steel mounting brackets. The item shall include all necessary hardware, fasteners, cable management accessories, electrical fittings, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 3 | SS Bench (1800mm x 381mm x 450mm)Providing and supplying Stainless Steel Bench of approved size, complete with all fittings and accessories as specified. The bench top shall be manufactured with a brushed finish Stainless Steel surface incorporating a Pre-Laminated Board (PLB) insert for enhanced strength and durability. The overall thickness of the top shall be 25 mm. The stainless steel surface shall be smooth, easy to clean, corrosion-resistant, and suitable for hygienic environments. The supporting frame shall be fabricated from 30 mm × 30 mm × 1.5 mm thick MS square tubes, welded to form a rigid and stable structure. The frame shall be securely fixed to the top using suitable screws and fasteners. The bottom ends of the legs shall be provided with high-quality plastic buffers/end caps to protect the flooring and ensure stability. The stretcher/support members shall also be fabricated from 30 mm × 30 mm × 1.5 mm thick MS powder-coated square tubes, welded and bolted to the side frames for additional strength and rigidity. All exposed MS components shall be epoxy polyester powder coated to a minimum dry film thickness of 50 ± 10 microns, ensuring superior corrosion resistance and a durable finish. The item shall include all necessary hardware, fasteners, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 4 | Relish Table (1800mm x 900mm x 750mm)Providing and supplying Relish Table of approved size, complete with all fittings and accessories as specified. The table top shall be manufactured with a brushed finish Stainless Steel surface incorporating a Pre-Laminated Board (PLB) insert for enhanced strength and durability. The top shall be smooth, corrosion-resistant, easy to clean, and suitable for hygienic environments. The supporting frame shall be fabricated from 30 mm × 30 mm × 1.5 mm thick MS square tubes, welded to form a rigid and stable structure. The frame shall be securely fixed to the top using suitable screws and fasteners. The bottom ends of the legs shall be fitted with high-quality plastic buffers/end caps to protect the flooring and provide stability. The stretcher/support members shall also be fabricated from 30 mm × 30 mm × 1.5 mm thick MS powder-coated square tubes, welded and bolted to the side frames for additional structural strength and rigidity. All exposed MS components shall be finished with epoxy polyester powder coating in S/G Metallic Dark Grey (Nerocoat Shade No. 9000626) with a minimum dry film thickness of 50 ± 10 microns, ensuring excellent corrosion resistance and long-lasting performance. The item shall include all necessary hardware, fasteners, accessories, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 5 | Enterprise Table – 1200 mmProviding and supplying Enterprise Table of size 1200 mm (L), complete with integrated wire management system, all fittings, accessories, and hardware as specified. The work surface shall be manufactured from 18 mm thick Pre-Laminated Particle Board (PLB) with all exposed edges sealed using 2 mm thick PVC edge banding, ensuring durability and resistance to moisture and impact. The table frame shall comprise fabricated components made from 1.2 mm thick CRCA 'D' Grade steel conforming to IS: 513 and 38 mm × 25 mm × 1.2 mm thick MS ERW tube conforming to IS: 7138, providing a rigid and stable structure. All steel components shall be finished with epoxy polyester powder coating having a minimum dry film thickness of 50 ± 10 microns. The table shall be provided with adjustable levellers consisting of Nylon-6 with moulded MS bolt inserts to facilitate proper alignment on uneven floor surfaces. The workstation shall incorporate an integrated wire management system consisting of: Horizontal Wire Carrier: Fabricated from 0.7 mm thick CRCA 'D' Grade steel conforming to IS: 513, epoxy polyester powder coated to a minimum thickness of 50 ± 10 microns. Vertical Wire Carrier: Fabricated from 0.8 mm thick CRCA 'D' Grade steel conforming to IS: 513, epoxy polyester powder coated to a minimum thickness of 50 ± 10 microns. The item shall include all necessary fittings, fasteners, hardware, cable management accessories, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 6 | Mingle Unitised Conference TableProviding and supplying Mingle Unitised Conference Table of approved size and seating capacity, complete with integrated Audio-Visual (AV) cable management system, fittings, accessories, hardware, assembly, transportation, and installation as specified. The conference table shall be a unitised modular system specifically designed to integrate conference furniture with modern Audio-Visual (AV) technology, enabling seamless collaboration, presentations, video conferencing, and interactive discussions. The table shall be ergonomically designed to provide optimum screen viewing angles for all participants. The table shall incorporate an integrated cable management system with built-in cable retractors, allowing AV, power, and data cables to be conveniently accessed and automatically retracted into the worktop at the push of a button, ensuring a neat and clutter-free working surface. The cable retraction mechanism shall be concealed within the table support structure, providing a clean aesthetic appearance without the need for excessive external panelling while allowing easy access for maintenance. The conference table shall be suitable for use as a discussion table and boardroom table and shall be available in configurations ranging from 6-seater to 14-seater to be used as discussion tables as well as board room desks Seating Capacity 8 persons, as specified in the drawings and schedule of quantities.The item shall include all necessary hardware, cable management accessories, AV integration provisions, fittings, fasteners, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 7 | Steel Storage Cabinet (Plain Model with 4 Shelves)Providing and supplying Steel Storage Cabinet – Plain Model with 4 Adjustable Shelves, overall size 916 mm (W) × 486 mm (D) × 1980 mm (H) (excluding levellers), complete with all fittings and accessories as specified. The cabinet shall be of fully welded construction and fabricated from CRCA 'D' Grade steel conforming to IS: 513. The material thickness shall be as follows:0.7 mm (±0.07 mm) thick CRCA sheet for shelves.0.8 mm (±0.08 mm) thick high-yield strength CRCA sheet for doors and back panel.0.9 mm (±0.08 mm) thick CRCA sheet for all remaining structural components.The cabinet shall be provided with double doors fitted with a Mazak handle and a three-way locking mechanism incorporating top and bottom shooting bolts for secure locking. The cabinet shall be equipped with four adjustable full-width shelves mounted on adjustable shelf supports to allow height adjustment as required. Each shelf shall have a uniformly distributed load carrying capacity of 40 kg. The cabinet shall be designed to accommodate A4 size box files (85 mm × 345 mm × 285 mm) in a vertical position on three shelves, with a minimum clear space of 240 mm above the fourth shelf for storage flexibility. The item shall include all necessary hardware, locks, keys, levellers, fittings, fasteners, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 8 | Enterprise Table 1350X750 Table Worksurface 18mm thk. Pre Laminated Particle board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.18mm thk. Pre Laminated Particle board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding.Only offered in sizes 1500 and 1650 wide desk. Fabricated component in 1.2mm thick CRCA ‘D’ Grade as per IS:513.Finish: Epoxy Polyester Powder coated to thickness of 50 micron (±10).Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138),Finish: Epoxy Polyester Powder coated to thickness of 50 micron (±10) Leveler: Nylon 6 & MS Bolt insert moulded. Horizontal Wire Carrier 0.7mm thick CRCA ‘D’ Grade as per IS:513. Finish: Epoxy Polyester Powder coated to thickness of 50 micron (±10). Vertical Wire Carrier0.8mm thick CRCA ‘D’ Grade as per IS:513.Finish: Epoxy Polyester Powder coated to thickness of 50 micron (±10). Make :- (As per Specified in Techanical specification of furniture of NIT). |
| 9 | Enterprise Table – 1500 mm x 750 mm with CPU HangerProviding and supplying Enterprise Table of size 1500 mm (L) with CPU Hanger, complete with integrated wire management system, all fittings, accessories, hardware, assembly, transportation, and installation as specified. The work surface shall be manufactured from 18 mm thick Pre-Laminated Particle Board (PLB) with all exposed edges finished using 2 mm thick PVC edge banding, providing resistance to impact, moisture, and wear. The supporting frame shall consist of fabricated components made from 1.2 mm thick CRCA 'D' Grade steel conforming to IS: 513 and 38 mm × 25 mm × 1.2 mm thick MS ERW tubes conforming to IS: 7138, forming a rigid and durable structure. All exposed steel components shall be finished with epoxy polyester powder coating to a minimum dry film thickness of 50 ± 10 microns. The table shall be provided with a CPU Hanger fabricated from powder-coated steel, securely mounted beneath the worktop to safely support and protect the CPU while maximizing floor space and facilitating easy access for maintenance. The workstation shall be equipped with an integrated wire management system, comprising: Horizontal Wire Carrier: Fabricated from 0.7 mm thick CRCA 'D' Grade steel conforming to IS: 513, epoxy polyester powder coated to a minimum thickness of 50 ± 10 microns. Vertical Wire Carrier: Fabricated from 0.8 mm thick CRCA 'D' Grade steel conforming to IS: 513, epoxy polyester powder coated to a minimum thickness of 50 ± 10 microns. The table shall be provided with adjustable levellers consisting of Nylon-6 with moulded MS bolt inserts for proper alignment on uneven floor surfaces. The item shall include the CPU hanger, wire management accessories, all necessary hardware, fasteners, fittings, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 10 | EQ Bed – 2100 × 900 mmProviding and supplying EQ Bed of overall size 2100 mm (L) × 900 mm (W), complete with all fittings, hardware, accessories, assembly, transportation, and installation as specified. The bed shall be provided with a headboard fabricated from 18 mm thick Pre-Laminated Particle Board (PLB) in Shade 4501, Make: Godrej (Shirval) or approved equivalent. All exposed edges shall be finished with 2 mm thick PVC edge banding. The bed leg frame shall be fabricated from 50 mm × 25 mm × 1.2 mm thick MS box sections, providing a rigid and durable support structure. Internal support members shall be made from 19 mm × 19 mm × 0.9 mm thick MS box sections, while the headboard frame shall be fabricated from 25 mm × 25 mm × 0.9 mm thick MS box sections. The mattress holding brackets shall be fabricated from 0.6 mm thick CRCA steel sheet, and the mattress support platform shall consist of 1.0 mm thick CRCA sheet metal, ensuring adequate strength and stability. The powder-coated finish shall be as follows:Bed leg frame: Matt Taupe White, Ref. No. 9001904, with epoxy polyester powder coating of 50 ± 10 microns dry film thickness. Mattress frame: EPP FR TEX Milky White – 20K, Ref. No. 9003456, with epoxy polyester powder coating of 50 ± 10 microns dry film thickness. All remaining metal components: S/G Charbrown, Ref. No. 9000605, with epoxy polyester powder coating of 50 ± 10 microns dry film thickness. The item shall include all necessary fasteners, fittings, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 11 | Harmony Corner Table – 450 × 450 × 450 mmProviding and supplying Harmony Corner Table of overall size 450 mm (L) × 450 mm (W) × 450 mm (H), complete with all fittings, hardware, accessories, assembly, transportation, and installation as specified. The table shall be constructed using 18 mm thick Pre-Laminated Particle Board (PLB) for all visible panels, providing a sturdy and durable structure. All exposed edges shall be finished with matching PVC edge lipping having a smooth matt finish. The table shall be finished with 18 mm thick Pre-Laminated Particle Board in Rimini Walnut Suede finish and Cloud Grey Suede finish, with matching edge lipping, as specified in the approved furniture schedule. The unit shall be assembled using high-quality fasteners and hardware to ensure structural stability, durability, and ease of maintenance. The item shall be supplied as one complete table in a single package, including all necessary fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 12 | LUFT 2.0 Public Seating System – 5 Seater Providing and supplying LUFT 2.0 Public Seating System in 5-seater configuration, complete with integrated seating, backrests, armrests, structural frame, optional centre table (where specified), all fittings, hardware, assembly, transportation, and installation as per approved drawings and specifications. The seat shall be manufactured from high-density self-skin polyurethane foam, reinforced with 1.2 mm thick MS perforated sheet inserts. The polyurethane foam shall have a minimum density of 350 kg/m³ and Shore 'A' hardness of 60 ± 10, with integrated lumbar padding for enhanced comfort. The seat size shall be 520 mm (W) × 505 mm (D). The backrest shall also be manufactured from high-density self-skin polyurethane foam, reinforced with 1.2 mm thick MS perforated sheet inserts, having a minimum density of 350 kg/m³ and Shore 'A' hardness of 60 ± 10, complete with integrated lumbar support. The backrest size shall be 520 mm (W) × 535 mm (H). The cross beam shall be fabricated from diamond-shaped double-wall extruded Aluminium Alloy 6063-T6, having dimensions of approximately 113 mm (W) × 94 mm (H) × 4 mm thickness, finished with epoxy polyester powder coating of 50 microns and provided with polypropylene copolymer engineering plastic end caps. The legs shall be manufactured from high-pressure die-cast Aluminium ADC12, finished with 50 ± 10 microns epoxy polyester powder coating, and fitted with soft-grip PVC adjustable levelling shoes. The armrests shall be fabricated from high-pressure die-cast Aluminium ADC12 with epoxy polyester powder coating of 50 ± 10 microns. The clamping brackets shall be manufactured from 3 mm thick Hot Rolled Steel conforming to IS: 2062, finished with epoxy polyester powder coating of 50 ± 10 microns. Where specified, the seating system shall be provided with compact laminate table tops of 13 mm thickness in Warm Grey (Shade 8117, Suede Finish), fitted with brass metal inserts, and available in small, medium, or large sizes as per the approved furniture schedule. The seat bottom support bracket assembly shall be fabricated from 3 mm thick HR steel conforming to IS: 2062, manufactured using Argo Shield welding technology and finished with PW15 – Gargoyle (Matt Finish) epoxy polyester powder coating. The item shall include all necessary hardware, fasteners, accessories, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 13 | Table T-111Providing and supplying Table T-111 of overall size 1199 mm (L) × 590 mm (W) × 750 mm (H), complete with all fittings, hardware, accessories, assembly, transportation, and installation as specified. The table shall be designed to meet varying functional and hierarchical office requirements and shall be of robust construction with a durable work surface and supporting framework. The table shall be available with round or tubular understructure, as specified in the approved furniture schedule. The table shall be provided with an ergonomically designed footrest (where applicable) to enhance user comfort during prolonged use. The unit shall be available with drawer combinations as specified in the approved drawings and schedule, providing adequate storage for office stationery and documents. The item shall include all necessary hardware, fasteners, drawer fittings, locks (where applicable), accessories, assembly, transportation, and installation complete in all respects. Overall Size: 1199 mm (L) × 590 mm (W) × 750 mm (H).Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 14 | Matrix 3-Seater Public Seating BenchProviding and supplying Matrix 3-Seater Public Seating Bench, complete with seat assembly, backrest, armrests, structural frame, fittings, hardware, assembly, transportation, and installation as specified. The seat shell shall comprise a welded assembly of seat, back, and side frames. The seat and back shall be fabricated from 1.2 ± 0.13 mm thick CR steel sheet with oblong perforations and welded to HR steel side frames of size 32 ± 0.5 mm × 5 ± 0.5 mm thick. The complete welded assembly shall be finished with epoxy polyester powder coating having a dry film thickness (DFT) of 40–60 microns. The seat shall be ergonomically designed with a front waterfall edge to provide adequate popliteal clearance for enhanced seating comfort. It shall also incorporate a contoured buttock support curve to provide proper lumbar support and prevent small children from slipping through the gap between the seat and backrest. The smooth and flat surfaces of the seat and back shall facilitate easy cleaning and maintenance. The understructure assembly shall consist of a connecting beam and leg assembly fabricated from MS ERW oblong tubes of size 75 ± 0.3 mm × 25 ± 0.3 mm × 2.0 ± 0.16 mm thick. The complete welded understructure shall be finished with epoxy polyester powder coating having a dry film thickness (DFT) of 40–60 microns. The armrest assembly shall comprise an armrest frame fabricated from 31.75 ± 0.5 mm × 4.7 ± 0.27 mm thick HR steel, finished with epoxy polyester powder coating (DFT 40–60 microns). The armrest shall be fitted with injection-moulded Nylon arm pads securely fixed to the frame. The seating dimensions shall be approximately 478 mm (W) × 446 mm (D) for each seat and 416 mm (W) × 230 mm (H) for each backrest. The item shall include all necessary hardware, fasteners, accessories, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 15 | Minor Steel Storage CabinetProviding and supplying Minor Steel Storage Cabinet of overall size 900 mm (W) × 450 mm (D) × 1167.5 mm (H), complete with all fittings, hardware, accessories, assembly, transportation, and installation as specified. The cabinet shall be of rigid knock-down construction and fabricated from Prime Quality CRCA 'D' Grade steel conforming to IS: 513. The cabinet panels shall be manufactured from 0.6 mm (±0.07 mm) thick CRCA steel, while the front frame and shelves shall be fabricated from 0.8 mm (±0.08 mm) thick CRCA steel for enhanced strength and durability. The cabinet shall be provided with a full-height hinged steel door fitted with a recessed plastic handle-cum-cam lock and a three-way locking mechanism incorporating top and bottom shooting bolts to ensure secure locking. The cabinet shall be equipped with two adjustable full-width shelves, allowing flexible storage arrangements. It shall be designed to accommodate A4 size box files (85 mm × 345 mm × 285 mm) in a vertical position on two shelves, with a minimum clear clear space of 280 mm above the third storage compartment. All steel components shall be treated for corrosion resistance and finished with a durable epoxy polyester powder coating of approved shade and finish. The item shall include all necessary locks, keys, fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 16 | Table–8 (1200mm x 590mm x 735mm)Providing and supplying Table–8 of approved size, complete with all fittings, hardware, accessories, assembly, transportation, and installation as specified. The table top/panels shall be manufactured from 18 ± 0.5 mm thick Pre-Laminated Particle Board (PLB), E2 Grade, with all exposed edges finished using 2 mm thick PVC edge banding to provide a smooth, durable, and moisture-resistant finish. The supporting steel components shall be fabricated from 0.9 ± 0.09 mm thick CRCA mild steel, finished with epoxy polyester powder coating having a minimum dry film thickness of 50 ± 10 microns for enhanced corrosion resistance and durability. The table shall be supported on 25.4 ± 0.3 mm diameter × 1.2 ± 0.096 mm thick MS ERW tubular legs, finished with epoxy polyester powder coating of 50 ± 10 microns thickness. The table shall be of sturdy construction and shall include all necessary hardware, fasteners, fittings, levelling arrangements (where applicable), assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 17 | Pisa Sofa – 2 SeaterProviding and supplying Pisa Sofa – 2 Seater, complete with upholstered seat and back, stainless steel leg assembly, fittings, hardware, assembly, transportation, and installation as specified. The seat shall be cushioned with PU foam of density 28 ± 2 kg/m³, overlaid with an additional super-soft PU foam layer of density 32 ± 2 kg/m³, and upholstered in approved fabric or leatherette, as specified in the approved furniture schedule. The backrest shall be cushioned with PU foam of density 28 ± 2 kg/m³, provided with two additional layers of super-soft PU foam of density 32 ± 2 kg/m³, and upholstered in matching fabric or leatherette, ensuring superior comfort and support. The understructure shall be fabricated from 12 ± 1 mm thick hot-pressed plywood, moisture-resistant and termite-proof, conforming to IS: 303, combined with seasoned pinewood sections free from major knots and surface defects. The seating system shall be supported by six Nos. of zigzag spring assemblies per seat, manufactured from 3.8 mm diameter spring steel wire, to provide enhanced resilience and seating comfort. The leg assembly shall be of welded construction, fabricated from Stainless Steel Grade SS 202 tubes and plates, complete with high-quality plastic end caps to protect the flooring and provide stability. The item shall include all necessary fittings, fasteners, hardware, upholstery, assembly, transportation, and installation complete in all respects. Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 18 | Pisa Sofa – 3 SeaterProviding and supplying Pisa Sofa – 3 Seater, complete with upholstered seat and back, stainless steel leg assembly, fittings, hardware, assembly, transportation, and installation as specified. The seat shall be cushioned with PU foam of density 28 ± 2 kg/m³, overlaid with an additional super-soft PU foam layer of density 32 ± 2 kg/m³, and upholstered in approved fabric or leatherette, as specified in the approved furniture schedule. The backrest shall be cushioned with PU foam of density 28 ± 2 kg/m³, provided with two additional layers of super-soft PU foam of density 32 ± 2 kg/m³, and upholstered in matching fabric or leatherette, ensuring superior comfort and support. The understructure shall be fabricated from 12 ± 1 mm thick hot-pressed plywood, moisture-resistant and termite-proof, conforming to IS: 303, combined with seasoned pinewood sections free from major knots and surface defects. The seating system shall be supported by six Nos. of zigzag spring assemblies per seat, manufactured from 3.8 mm diameter spring steel wire, to provide enhanced resilience and seating comfort. The leg assembly shall be of welded construction, fabricated from Stainless Steel Grade SS 202 tubes and plates, complete with high-quality plastic end caps to protect the flooring and provide stability. The item shall include all necessary fittings, fasteners, hardware, upholstery, assembly, transportation, and installation complete in all respects. Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 19 | Pisa Centre Table – 1120 × 600 × 351 mmProviding and supplying Pisa Centre Table of overall size 1120 mm (L) × 600 mm (W) × 351 mm (H), complete with all fittings, hardware, accessories, assembly, transportation, and installation as specified. The table shall be provided with an understructure fabricated from Stainless Steel Grade SS 202, finished in buff polished finish, forming a rigid and aesthetically pleasing support structure. The table top shall be of rectilinear design with rounded corners and chamfered edges, providing a clean, elegant, and contemporary appearance. The top shall be made of 12 mm thick toughened clear glass, having a smooth, scratch-resistant surface suitable for regular use. The table shall be designed to provide excellent stability, durability, and ease of maintenance, making it suitable for office lounges, reception areas, and waiting spaces. The item shall include all necessary hardware, fasteners, fittings, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 20 | Wish Cubicle Workstation – 1650 × 750 mm with 450 mm Deep ReturnProviding and supplying Wish Cubicle Workstation of overall size 1650 mm (L) × 750 mm (W) with 450 mm deep return, complete with modular partition system, worktop, powder-coated support legs, fittings, hardware, assembly, transportation, and installation as specified. The workstation shall be provided with 52.4 mm thick modular partition panels having an overall height of 1200 mm in the Wish System. The panel configuration shall comprise a metal raceway at the bottom, two intermediate fabric-clad blocks, a fabric tackable panel, a whiteboard panel, and a fabric magnetic panel at the top, facilitating cable management, display, writing, and pin-up functions. The workstation shall be supported on powder-coated Frontier legs, providing a rigid and stable structure. The front shall be provided with a pre-laminated modesty panel, matching the workstation finish and ensuring user privacy. The worktop shall be manufactured from pre-laminated particle board with matching PVC edge banding and securely fixed to the partition and support structure using approved hardware and fittings. The item shall include all necessary connectors, brackets, cable raceways, hardware, fasteners, accessories, assembly, transportation, and installation complete in all respects. Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 21 | Topaz Table – 2100mm x 1200 mmProviding and supplying Topaz Table of 1200 mm width, complete with storage unit, fittings, hardware, accessories, assembly, transportation, and installation as specified. The worktop, side panels, modesty panel, and storage components shall be manufactured from 25 mm thick Pre-Laminated Twin Board of E1-P2 Grade, conforming to IS: 12823:1990, in the approved shade. All exposed edges shall be finished with 2 mm thick matching PVC edge banding to provide a durable, smooth, and moisture-resistant finish. The work surface shall be provided with a grommet for efficient wire management, enabling neat routing of power and data cables. The table shall be integrated with a storage unit provided with lockable shutters/drawers (as applicable), complete with ergonomically designed handles for ease of operation and a locking arrangement to ensure secure storage of documents and office accessories. The supporting structure shall be robustly constructed to provide stability and durability under normal office use. The item shall include all necessary hardware, locks, keys, handles, cable management accessories, fasteners, fittings, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 22 | Vertical Filing CabinetProviding and supplying Vertical Filing Cabinet of approved size and capacity, complete with all fittings, hardware, locking system, assembly, transportation, and installation as specified. The cabinet shall be of rigid knock-down construction and fabricated from CRCA Grade 'D' steel conforming to IS: 513. The material thickness shall be as follows:Top, side panels, and drawer fronts: 0.7 mm thick CRCA steel Drawer inside cover, drawer sides, and drawer back: 0.6 mm thick CRCA steel Back panel, bottom panel, and drawer bottom: 0.5 mm thick CRCA steel The drawers shall be provided with full-length recessed metal handles integrated into the drawer fronts for easy grip and smooth operation. The filing cabinet shall be designed to accommodate hanging \\"Ezee\\" / \\"Visa\\" foolscap files, suspended from front to back (files arranged along the width of the drawer). Each drawer shall have a storage capacity of 28 Nos. of 20 mm thick hanging files. The cabinet shall be provided with a centralized cam locking system and an anti-tip mechanism, ensuring that only one drawer can be opened at a time, thereby preventing accidental tipping and enhancing user safety. All steel components shall be suitably pre-treated against corrosion and finished with epoxy polyester powder coating of approved shade and finish, providing a durable, scratch-resistant, and corrosion-resistant surface. The item shall include all necessary locks, keys, hanging file rails, hardware, fittings, fasteners, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 23 | Fineese Table 6030 with ERU 5216Providing and supplying Fineese Executive Table Model 6030 with ERU (Extended Return Unit) Model 5216, complete with hinged drawer unit, modesty panels, fittings, hardware, accessories, assembly, transportation, and installation as specified. The main table worktop and side panels shall be manufactured from 25 ± 0.5 mm thick Plain Particle Board (PPB) conforming to IS: 3087, clad with 0.6 mm thick post-formed decorative laminate on the top surface and 1.0 mm thick balancing laminate (BDL) on the underside. All flat exposed edges shall be sealed with 2 mm thick matching PVC edge banding. The modesty panel shall be fabricated from 18 ± 0.5 mm thick Plain Particle Board (PPB) conforming to IS: 3087, finished on both sides with 1.0 mm thick decorative laminate (DL), and all exposed edges shall be sealed with 2 mm thick PVC edge banding. The Extended Return Unit (ERU) Model 5216 shall comprise 25 ± 0.5 mm thick Plain Particle Board (PPB) conforming to IS: 3087, clad with 0.6 mm thick post-formed decorative laminate on the top surface and 1.0 mm thick balancing laminate (BDL) on the underside. The return unit shall be provided with an 18 ± 0.5 mm thick laminated modesty panel, finished with 1.0 mm thick decorative laminate on both sides and 2 mm thick PVC edge banding. The hinged drawer/storage unit shall be constructed with 25 ± 0.5 mm thick Plain Particle Board (PPB) conforming to IS: 3087, clad with 0.6 mm thick post-formed decorative laminate and 1.0 mm thick balancing laminate (BDL). The doors, partitions, and shelves shall be manufactured from 18 ± 0.5 mm thick Plain Particle Board (PPB), finished on both sides with 1.0 mm thick decorative laminate (DL), with all exposed edges sealed using 2 mm thick PVC edge banding. The table shall include all necessary drawer fittings, hinges, locks, handles, fasteners, hardware, accessories, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 24 | Finesse Executive Table 5026 with ERU 3619Providing and supplying Finesse Executive Table Model 5026 with Extended Return Unit (ERU) Model 3619, complete with hinged drawer unit, modesty panel, fittings, hardware, accessories, assembly, transportation, and installation as specified. The main table worktop and side panels shall be manufactured from 25 ± 0.5 mm thick Plain Particle Board (PPB) conforming to IS: 3087, clad with 0.6 mm thick post-formed decorative laminate on the top surface and 1.0 mm thick balancing laminate (BDL) on the underside. All exposed flat edges shall be sealed with 2 mm thick matching PVC edge banding. The modesty panel shall be fabricated from 18 ± 0.5 mm thick Plain Particle Board (PPB) conforming to IS: 3087, finished on both sides with 1.0 mm thick decorative laminate (DL), with all exposed edges sealed using 2 mm thick PVC edge banding. The Extended Return Unit (ERU) Model 3619 shall be integrated with the executive table and constructed to match the table finish and specifications, providing additional workspace and storage functionality. The hinged drawer/storage unit shall be manufactured from 25 ± 0.5 mm thick Plain Particle Board (PPB) conforming to IS: 3087, clad with 0.6 mm thick post-formed decorative laminate on the external surface and 1.0 mm thick balancing laminate (BDL) on the reverse side. The doors, partitions, and shelves shall be fabricated from 18 ± 0.5 mm thick Plain Particle Board (PPB), finished on both sides with 1.0 mm thick decorative laminate (DL) and all exposed edges sealed with 2 mm thick PVC edge banding. The table shall be complete with hinged storage unit, drawer fittings, locks, handles, hinges, fasteners, hardware, accessories, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 25 | Thrill Relax ChairProviding and supplying Thrill Relax Chair, complete with upholstered seat, mesh backrest, adjustable lumbar support, base, armrests (where applicable), fittings, hardware, assembly, transportation, and installation as specified. The seat shall be manufactured from 15 ± 1 mm thick hot-pressed plywood and upholstered with approved fabric upholstery over moulded High Resilience (HR) Polyurethane foam. The seat shall be ergonomically designed with extra-thick foam at the front edge to provide enhanced comfort to the popliteal area during prolonged seating. The backrest shall be manufactured from glass-filled injection-moulded nylon and upholstered with high-quality breathable mesh fabric. The backrest shall be provided with an adjustable lumbar support made from injection-moulded polypropylene, offering a vertical adjustment range of 50 ± 1 mm for improved lower back support. The chair shall have the following dimensions:Seat Size: 535 mm (W) × 510 mm (D)Mesh Back Size: 510 mm (W) × 700 mm (H)The HR polyurethane seat foam shall have a density of 45 ± 2 kg/m³ and a hardness of 16 ± 2 kg at 25% compression, conforming to IS: 7888, ensuring optimum comfort, resilience, and durability. The chair shall be complete with all necessary fittings, fasteners, hardware, assembly, transportation, and installation, ready for use in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 26 | Thrill Cushions Executive ChairProviding and supplying Thrill Cushions Executive Chair, complete with upholstered seat and back, adjustable armrests, base, fittings, hardware, assembly, transportation, and installation as specified. The backrest shall be manufactured from 12 ± 1 mm thick hot-pressed plywood, and the seat shall be manufactured from 15 ± 1 mm thick hot-pressed plywood, measured as per the applicable quality assurance procedure. Both the seat and back shall be upholstered with approved fabric upholstery over moulded High Resilience (HR) Polyurethane foam. The backrest foam shall be ergonomically designed with an integrated contoured lumbar support, while the seat shall incorporate extra-thick foam at the front edge to provide enhanced comfort to the popliteal region during prolonged seating. The seat and back cushions shall be provided with Recron fibre filling (for Executive Chair model) to enhance softness, comfort, and cushioning performance. The HR Polyurethane foam shall have a density of 45 ± 2 kg/m³ and a hardness of 14 ± 2 kgf at 25% compression, conforming to IS: 7888, ensuring long-lasting resilience and seating comfort. The chair shall be provided with height-adjustable armrests featuring: Up/Down adjustment in 6 positions with an adjustment range of 72 ± 5 mm.Armrest support structure manufactured from glass-filled nylon.PU moulded arm pads over a glass-filled nylon insert, providing durable and comfortable arm support. The chair shall be complete with all necessary fittings, fasteners, hardware, adjustment mechanisms, assembly, transportation, and installation, ready for use in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 27 | Thrill Mesh Black ChairProviding and supplying Thrill Mesh Black Chair with adjustable armrests, complete with seat and back assembly, base, castors, fittings, hardware, transportation, installation, and all accessories as specified. The seat shall be manufactured from 1.5 ± 0.1 cm thick hot-pressed plywood and upholstered with premium quality fabric. The seat shall be cushioned with moulded High Resilience (HR) Polyurethane foam having a density of 45 ± 2 kg/m³ and hardness of 16 ± 2 kgf at 25% compression, conforming to IS: 7888. The front edge of the seat shall be provided with extra-thick foam to ensure enhanced comfort and reduce pressure on the popliteal region during prolonged seating. The backrest shall be injection moulded from glass-filled Nylon and upholstered with high-quality black mesh fabric to provide adequate ventilation and ergonomic support. The backrest shall incorporate an adjustable lumbar support made of injection moulded polypropylene with a vertical adjustment range of 5.0 ± 0.1 cm. The chair shall be provided with height-adjustable armrests featuring: Up–Down adjustment in 6 steps with an adjustment range of 7.2 ± 0.5 cm.Armrest structure manufactured from glass-filled Nylon. PU moulded arm pads over glass-filled Nylon inserts for improved comfort and durability. The chair shall be suitable for use in the following areas:Video Conferencing Room, Jailor Office, Guard & Search Room, Visitor Room, Superintendent Office, General Staff Office, Offices 1 to 5The item shall include all necessary fittings, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 28 | Grandeur Executive TableProviding and supplying Grandeur Executive Table, complete with integrated drawer unit, modesty panel, leather writing pad, fittings, hardware, accessories, assembly, transportation, and installation as specified. The main worktop shall be manufactured from a 43 ± 1 mm thick composite panel consisting of MDF and Particle Board, finished with a natural wood veneer on the top surface and coated with clear protective lacquer. All exposed edges shall be finished with matching 1 mm thick veneer edge banding. The table shall be provided with an 18 ± 1 mm thick MDF leather writing pad, wrapped with premium leatherette and securely fixed over the main worktop to provide a durable and comfortable writing surface. The drawer unit top and drawer unit modesty panel shall be manufactured from 43 ± 1 mm thick MDF and Particle Board composite panels, finished with natural wood veneer and clear lacquer coating. All exposed edges shall be sealed with matching veneer edge banding. The remaining table construction, including side panels and internal components, shall be manufactured from 18 mm thick Pre-Laminated Twin Board (PLT), E1-P2 Grade, conforming to IS: 12823:1990, with all exposed edges finished using 2 mm thick matching PVC edge banding. The drawer bottoms shall be fabricated from 9 mm thick Particle Board with a leatherette-finished top surface. The drawer unit shall be fitted with soft-closing telescopic channels to ensure smooth, silent, and effortless operation. The drawer unit shall be provided with a central locking system operated through a side-mounted lock for secure storage of documents and office accessories. The modesty panel shall be manufactured from 18 mm thick Pre-Laminated Twin Board (PLT) conforming to IS: 12823:1990, finished with matching 2 mm thick PVC edge banding, and provided with decorative aluminium trims for enhanced aesthetics. The table shall include all necessary hardware, soft-close drawer fittings, locks, keys, handles, aluminium trims, fasteners, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 29 | Mingle Modular Conference TableProviding and supplying Mingle Modular Conference Table of approved size and configuration, complete with integrated cable management system, fittings, hardware, accessories, assembly, transportation, and installation as specified. The worktop shall be manufactured from 25 mm thick Pre-Laminated Twin Board (PLT), E2 Grade, in the approved shade, with all exposed edges finished using 2 mm thick matching PVC edge banding. The worktop shall be available in the required shape and configuration as shown in the approved drawings. A plastic ABS access flap shall be provided on the work surface to facilitate easy access for routing power, data, audio, and video cables. The modesty panels and other structural panels shall be manufactured from 18 mm thick Pre-Laminated Twin Board (PLT), E2 Grade, finished with 2 mm thick matching PVC edge banding. The table shall be of knock-down construction, with the panels interconnected using Aluminium Alloy 63400-WP connecting profiles, ensuring rigidity, ease of assembly, and future reconfiguration. A powder-coated accent metal strip, fabricated from 0.8 mm thick CRCA steel conforming to IS: 513, shall be provided below the work surface to enhance the aesthetic appearance. The strip shall be finished with epoxy polyester powder coating having a dry film thickness (DFT) of 40–60 microns. The conference table shall incorporate an integrated wire management system comprising a series of 0.8 mm thick CRCA steel panels conforming to IS: 513, finished with epoxy polyester powder coating (DFT 40–60 microns), enabling organized routing of power, data, audio, and video cables. The table shall be provided with a provision for mounting an Anchor Roma 6-module plate or approved equivalent below the worktop. A worktop cable access cut-out fitted with a two-piece injection-moulded polymer component shall be provided to facilitate convenient pull-out and connection of audio, video, and charging cables to the power sockets installed beneath the worktop seating capacity of 9 person. The item shall include all necessary cable management accessories, electrical mounting provisions, fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 30 | AV Storage UnitProviding and supplying AV Storage Unit of approved size and configuration, complete with provision for AV equipment rack, glass shutters, ventilation panels, castors, fittings, hardware, accessories, assembly, transportation, and installation as specified. The storage unit shall be manufactured from 18 mm thick Pre-Laminated Twin Board (PLT), E2 Grade, in the approved shade, with all exposed edges finished using 0.8 mm thick matching PVC edge banding. The unit shall be provided with factory-prepared pilot holes for installation of 12U Audio-Visual (AV) equipment racks. The storage capacity shall be as follows:112 Storage Unit: Provision for 1 No. 12U AV Rack.312 Storage Unit: Provision for 3 Nos. 12U AV Racks.The front shutters shall be fabricated from 5 mm thick toughened grey-tinted glass with crystal edge polished finish, mounted on self-closing hinges incorporating soft-close dampers to ensure smooth and silent operation. The unit shall incorporate ventilation panels fabricated from 0.8 mm thick CRCA steel conforming to IS: 513, finished with epoxy polyester powder coating having a dry film thickness (DFT) of 40–60 microns. The size and configuration of the ventilation panels shall be as per the respective storage module. The storage unit shall be mounted on heavy-duty castors to facilitate mobility, as follows:112 Storage Unit: 4 Nos. heavy-duty castors.312 Storage Unit: 5 Nos. heavy-duty castors. The item shall include all necessary hardware, hinges, soft-close mechanisms, castors, AV rack fixing provisions, ventilation accessories, fasteners, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 31 | Revive Couch with Full StorageProviding and supplying Revive Examination Couch with Full Storage, complete with integrated storage compartments, adjustable headrest, mattress, tissue roll holder, fittings, hardware, accessories, assembly, transportation, and installation as specified. The couch shall be provided with full-length storage compartments fitted with recessed plastic handles, cam lock, and door catch, ensuring secure storage and ease of operation. Pull-out storage units shall be provided with recessed plastic handles and mounted on double-extension ball bearing slides for smooth and effortless operation. The couch top shall be fitted with an integrated Polyurethane (PU) foam mattress, upholstered in high-quality leatherette, and reinforced with plywood backing to provide adequate strength, durability, and user comfort. The headrest shall be adjustable through a gas spring-assisted mechanism operated by an actuating lever, allowing smooth adjustment to the desired position. The couch shall be provided with an integrated tissue roll holder for convenient access during medical examination and treatment. A pull-out footstep shall be incorporated beneath the couch, fitted with a recessed plastic handle for easy extension and retraction. The step shall be provided with three grooved aluminium extrusion strips fixed over the sheet metal surface to provide anti-slip grip and safe access while climbing onto the couch. The item shall include all necessary locks, handles, gas spring mechanism, ball-bearing slides, aluminium anti-slip strips, hardware, fittings, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 32 | Corner TableProviding and supplying Corner Table of approved size, complete with stainless steel understructure, glass top, fittings, hardware, accessories, assembly, transportation, and installation as specified. The table shall be provided with an understructure fabricated from Stainless Steel Grade SS 202, finished in buff polished finish, forming a rigid, durable, and aesthetically appealing support structure. The table top shall be of rectilinear design with rounded corners and chamfered edges, providing a clean, elegant, and contemporary appearance. The top shall be manufactured from 12 mm thick toughened clear glass, having a scratch-resistant surface and polished edges for safety and durability. The table shall be designed to provide excellent stability, strength, and ease of maintenance, making it suitable for office cabins, lounges, reception areas, and waiting spaces. The item shall include all necessary fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 33 | Aptis Bedside LockerProviding and supplying Aptis Bedside Locker of overall size 490 mm (L) × 410 mm (W) × 881 mm (H), complete with cabinet, drawers, castors, fittings, hardware, accessories, assembly, transportation, and installation as specified. The bedside locker shall comprise one lockable cabinet and two drawer units. The cabinet shall be provided with a locking arrangement for safe storage of valuable items, while the drawers shall be non-lockable and intended for storage of general-use articles. The locker shall be finished with anti-microbial thermosetting epoxy polyester powder coating, specially formulated to provide effective bacterial protection and long-lasting durability. The finish shall be in RAL White, with grey-coloured moulded plastic components. The unit shall be mounted on heavy-duty moulded plastic castors to facilitate easy movement, provide enhanced strength, and ensure proper levelling. The front castors shall be lockable, enabling secure positioning of the locker during use. The item shall include all necessary locks, keys, castors, hardware, fittings, fasteners, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 34 | Single Step StoolProviding and supplying Single Step Stool of overall size 485 mm (L) × 335 mm (W) × 210 mm (H), complete with all fittings, hardware, accessories, assembly, transportation, and installation as specified. The step stool shall be of robust and rigid construction, designed to provide safe and stable support for patients while accessing examination couches, treatment tables, or examination chairs. The understructure frame shall comprise four vertical support tubes, three horizontal tubes at the bottom, and three horizontal tubes at the top, forming a strong and stable framework to support the sheet metal platform. The top platform shall be fabricated from sheet metal and designed for safe standing. It shall be provided with three grooved aluminium extrusion strips in natural aluminium finish to provide a non-slip surface and ensure secure footing while climbing. All steel components shall be treated and finished with anti-bacterial epoxy polyester powder coating in Prince Grey, Semi-Gloss Finish, with a dry film thickness (DFT) of 50–80 microns, providing excellent corrosion resistance, durability, and bacterial protection. The item shall include all necessary fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 35 | Traverse 3-Seater Public Seating BenchProviding and supplying Traverse 3-Seater Public Seating Bench, complete with seats, backrests, armrests, structural frame, fittings, hardware, assembly, transportation, and installation as specified. The seating system shall be ergonomically designed with contoured seats and backrests to provide natural lumbar support, ensuring enhanced comfort during prolonged seating. The seats shall be generously proportioned to accommodate users of varying body sizes and provide comfortable seating in public waiting areas. The bench shall be supported on a triangular geometry base, designed to provide excellent structural stability and durability. The supporting legs shall be strategically positioned beneath the seating units to minimize tripping hazards and maximize user safety. The 3-seater configuration shall be provided with two armrests as standard. The seating system shall also be compatible with retrofit common armrests and optional add-on seat cushions, where specified, to enhance user comfort and aesthetics. The seating system shall be tested and certified in accordance with ANSI/BIFMA X5.4 standards for commercial and public seating applications, ensuring compliance with recognized requirements for strength, durability, and safety. The item shall include all necessary fittings, fasteners, hardware, accessories, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 36 | Optimizer Push & Pull Mobile Storage System (SS2 2400mm SW 2047mm SL2 2400mm SW 2047mm TM2 2400mm SW 2047mm D2 CHNL 1600mm D2 CHNL 2400mm )Providing and supplying Optimizer Push & Pull Mobile Storage System of approved size and configuration, complete with mobile storage units, adjustable shelves, push-pull mechanism, fittings, hardware, accessories, assembly, transportation, and installation as specified. The storage system shall be of rigid knock-down construction, fabricated from 0.8 mm thick CRCA Steel conforming to IS: 513, Grade 'D', ensuring high strength and durability. Each body block shall comprise one Main Unit with the required number of Add-on Units (0, 1, 2, or 3) depending upon the total number of storage bays (1, 2, 3, or 4 bays respectively). Each storage unit shall provide:1980 mm high unit: 5 loading levels comprising 4 adjustable shelves.2361 mm high unit: 6 loading levels comprising 5 adjustable shelves.The shelves shall be height-adjustable to facilitate flexible storage requirements and optimum space utilization. All steel components, including the body and shelves, shall undergo a comprehensive 8-stage anti-corrosion surface treatment, comprising: Hot water rinse, Knock-off degreasing, Chemical degreasing, Cold water rinse, Phosphating, Cold water rinse, Passivation, and Dry-off oven treatment.Following surface preparation, all components shall receive an epoxy polyester powder coating in the approved colour and shade with a minimum Dry Film Thickness (DFT) of 40 microns. The coating shall be oven baked at a controlled temperature of approximately 180°C to achieve a durable and corrosion-resistant finish. The powder coating shall be tested for the required physical and chemical properties in accordance with IS: 101, ensuring long-term durability and performance. The complete system shall include all necessary rails, drive mechanisms, locking arrangements, anti-tilt devices, handles, hardware, fasteners, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 37 | Optimizer Push & Pull Mobile Compactor Storage System (SS2 2400mm SW 2047mm SL2 2400mm SW 2047mm TM2 2400mm SW 2047mm D2 CHNL 800mm D2 CHNL 1600mm D2 CHNL 2400mm )Providing and supplying Optimizer Push & Pull Mobile Compactor Storage System of approved size and configuration, complete with mobile storage units, rail mechanism, adjustable shelves, locking arrangement, fittings, hardware, accessories, assembly, transportation, testing, and installation as specified. The storage system shall be of rigid knock-down construction, fabricated from 0.8 mm thick CRCA Steel conforming to IS: 513, Grade ‘D’. Each body block shall comprise one Main Unit together with the required number of Add-on Units (0, 1, 2, or 3 Nos.), depending upon the total number of bays (1, 2, 3, or 4 bays respectively). Each storage unit shall be provided with:1980 mm high body: 5 storage levels comprising 4 adjustable shelves.2361 mm high body: 6 storage levels comprising 5 adjustable shelves.The shelves shall be height-adjustable to suit varying storage requirements and ensure optimum space utilization. All steel components, including the body and shelves, shall undergo a comprehensive 8-stage anti-corrosion surface treatment, comprising: Hot water rinse, Knock-off degreasing, Chemical degreasing, Cold water rinse, Phosphating, Cold water rinse, Passivation, and Dry-off oven treatment.After pre-treatment, all components shall be finished with epoxy polyester powder coating in the approved colour and shade with a minimum Dry Film Thickness (DFT) of 40 microns. The coated components shall be oven baked at a controlled temperature of approximately 180°C to achieve a durable, scratch-resistant, and corrosion-resistant finish. The powder coating shall be tested for its physical and chemical properties in accordance with IS: 101. The complete mobile compactor system shall include push-pull operating mechanism, guide rails, carriage assembly, anti-tilt arrangement, locking system, handles, adjustable shelves, end panels, stoppers, hardware, fasteners, accessories, assembly, transportation, testing, and installation, complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 38 | Executive Table with Return UnitProviding and supplying Executive Table with Return Unit of approved size and configuration, complete with main worktop, return worktop, modesty panel, metal support legs, wire management system, fittings, hardware, accessories, assembly, transportation, and installation as specified. The main worktop shall be manufactured from 25 mm thick Pre-Laminated Board (PLB), E1-P2 Grade, conforming to IS: 12823:1990, in the approved shade. All exposed edges shall be finished with 2 mm thick matching PVC edge banding. The worktop shall be provided with an access flap for efficient routing and management of power, data, and communication cables. The return worktop shall also be manufactured from 25 mm thick Pre-Laminated Board (PLB), E1-P2 Grade, conforming to IS: 12823:1990, with all exposed edges finished using 2 mm thick matching PVC edge banding. The modesty panel shall be fabricated from 18 mm thick Pre-Laminated Twin Board (PLT), E1-P2 Grade, conforming to IS: 12823:1990, with all exposed edges sealed using 2 mm thick matching PVC edge banding. The table shall be supported on Cube-type metal legs fabricated from 50 mm × 25 mm × 1.2 mm thick and 40 mm × 40 mm × 1.2 mm thick MS ERW tubes, conforming to IS: 7138. The legs shall be provided with 3 mm thick HR steel support brackets, conforming to IS: 2062, welded to the top of the leg assembly for securely fixing the worktop. All welded joints shall be executed using Argon Shield Welding to ensure structural integrity and superior finish. The complete metal leg assembly shall be finished with epoxy polyester powder coating having a minimum dry film thickness (DFT) of 50 microns. Each leg shall be provided with a high-strength moulded plastic base cap incorporating an M8 threaded insert and an M8 levelling screw, allowing height adjustment up to 50 mm to compensate for uneven floor surfaces. The item shall include all necessary cable management accessories, fittings, fasteners, hardware, levelling devices, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 39 | Aristo Executive TableProviding and supplying Aristo Executive Table of approved size and configuration, complete with worktop, return unit (where applicable), storage unit, fittings, hardware, accessories, assembly, transportation, and installation as specified. The main worktop, side panels, modesty panel, and structural members shall be manufactured from 25 mm thick Pre-Laminated Twin Board (PLT), E1-P2 Grade, conforming to IS: 12823:1990, in the approved shade. All exposed edges shall be finished with 2 mm thick matching PVC edge banding to provide a durable, moisture-resistant, and smooth finish. The work surface shall be provided with a grommet for efficient wire management, enabling neat routing of electrical, data, and communication cables. The table shall incorporate decorative panels/components manufactured from 25 mm thick MDF, conforming to IS: 14587:1998, with one-side pre-laminated finish and 0.4 mm thick PVC membrane pressed onto the top surface, providing an elegant appearance and superior durability. All MDF components shall be accurately machined and securely integrated into the table assembly to achieve a premium finish and structural stability. The complete table shall include all necessary fittings, cable management accessories, grommets, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 40 | Aristo Back Storage UnitProviding and supplying Aristo Back Storage Unit of approved size and configuration, complete with shutters, shelves, locking arrangement, fittings, hardware, accessories, assembly, transportation, and installation as specified. The body panels, including side panels, bottom panel, back panel, and shelves, shall be manufactured from 25 mm thick Pre-Laminated Twin Board (PLT), E1-P2 Grade, conforming to IS: 12823:1990, in the approved shade. All exposed edges shall be finished with 2 mm thick matching PVC edge banding to provide a durable and aesthetically pleasing finish. The shutters shall be manufactured from 25 mm thick MDF, conforming to IS: 14587:1998, with one-side pre-laminated finish and 0.4 mm thick PVC membrane pressed onto the exposed surface, providing an elegant appearance and enhanced durability. The shutters shall be fitted with soft-closing, anti-slam hinges to ensure smooth, silent, and controlled operation. Ergonomically designed handles shall be provided for ease of opening and closing. The storage unit shall be equipped with a locking arrangement to provide secure storage of files, documents, and office accessories. The item shall include all necessary shelves, hinges, locks, keys, handles, fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 41 | Stretcher on TrolleyProviding and supplying Stretcher on Trolley of approved size and configuration, complete with stretcher platform, trolley frame, castors, fittings, hardware, accessories, assembly, transportation, and installation as specified. The stretcher shall be of robust welded construction, fabricated using Mild Steel (M.S.) Electric Resistance Welded (E.R.W.) tubes and Cold Rolled Close Annealed (CRCA) steel sheets of suitable thickness to provide high strength, rigidity, and long service life. All welded joints shall be finished smoothly to ensure safety and ease of cleaning. The trolley shall be mounted on heavy-duty swivel castors, enabling smooth movement and easy manoeuvrability within hospital premises. The complete metal framework shall be pre-treated against corrosion and finished with epoxy polyester powder coating of approved shade and thickness, providing a durable, hygienic, and corrosion-resistant surface. The stretcher shall be complete with all necessary fittings, fasteners, hardware, castors, accessories, assembly, transportation, and installation, ready for use in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 42 | Folding WheelchairProviding and supplying Folding Wheelchair of overall size 790 mm (L) × 600 mm (W) × 870 mm (H), complete with foldable frame, cushioned seat, flexible backrest, mag wheels, footrests, armrests, brakes, fittings, hardware, accessories, assembly, transportation, and installation as specified.The wheelchair shall be of foldable design with a chrome-finished frame, incorporating a cushioned seat and flexible backrest to provide enhanced comfort during patient transportation.The main frame shall be fabricated from Ø22 × 1.2 mm thick A3 carbon steel tubes with a chrome-plated finish, while the cross brace shall be manufactured from Ø25.4 × 1.2 mm thick A3 carbon steel tubes, providing excellent structural strength and rigidity.The wheelchair shall be fitted with 24-inch solid mag rear wheels having alloy rims and solid rubber tyres for durability and maintenance-free operation. The wheel hub shall be manufactured from PA (Polyamide) polymer, complete with an integrated hand rim fabricated from Ø16 × 1.2 mm thick A3 carbon steel with chrome finish for self-propulsion.The front wheels shall be 8-inch diameter castors, comprising PA polymer hubs with solid rubber tyres, ensuring smooth manoeuvrability.The wheelchair shall be provided with PU moulded armrests mounted on ABS polymer supports for improved user comfort. The footrests shall be manufactured from die-cast Aluminium Alloy (ZL104) and shall be height-adjustable, swing-away, and swivel type, allowing convenient patient access and comfortable leg positioning.The push handles shall be fitted with moulded PVC grips for comfortable handling by attendants. The wheelchair shall be equipped with manual hand-operated parking brakes to securely lock the rear wheels when stationary.An extended tipping lever fitted with a moulded PE plastic grip shall be provided to enable attendants to safely lift the front wheels while negotiating kerbs, ramps, or other obstructions.The item shall include all necessary fittings, fasteners, hardware, accessories, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 43 | Relax Chair – 4 Legs with Armrests (Without Castors)Providing and supplying Relax Chair – 4-Legged Type with Armrests (Without Castors), complete with mesh backrest, upholstered seat, MS understructure, fittings, hardware, assembly, transportation, and installation as specified.The chair shall be provided with a four-legged Mild Steel (MS) understructure of rigid construction, finished with approved epoxy polyester powder coating for enhanced durability and corrosion resistance.The backrest shall be ergonomically designed and upholstered with high-quality woven mesh fabric, providing excellent ventilation and lumbar comfort during prolonged use. The chair shall be available with either a white body fitted with black-and-white woven mesh or a black body fitted with black mesh, as specified in the approved furniture schedule.The seat shall be ergonomically contoured and upholstered with approved fabric in shades such as FK01, FK07, FK10, FK18, or equivalent, as specified.The chair shall be provided with integrated armrests for enhanced user comfort and shall be of the non-castor type. The design shall be stackable, allowing convenient storage and space optimization when not in use.The item shall include all necessary fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent |
| 44 | Glassdoor Storwel Product Size 916 mm (W) × 486 mm (D) × 1980 mm #(H) –Excluding Leveler3. Construction & Material• Welded construction• 0.7 mm thk (±0.07 mm) CRCA* for shelf• 0.8 mm thk (±0.08 mm) High yield strength CRCA** for doors and back• 0.9 mm thk (±0.08 mm) CRCA* for all other components*CRCA ‘D’ grade as per IS:513**CRCA ‘D’ grade high yield strength as per IS:5134. Locking & Handle• Zinc Alloy handle• Two way locking mechanism with shooting bolt5. Shelving• Height wise adjustable shelf mounting• Uniformly Distributed Load Capacity per each full shelf is 40 Kg maximum. Make :- (As per Specified in Techanical specification of furniture of NIT). |
| 45 | KD Plain Steel Storage CabinetProviding and supplying KD Plain Steel Storage Cabinet of overall size 900 mm (W) × 450 mm (D) × 1830 mm (H), complete with shelves, hinged doors, locking arrangement, fittings, hardware, accessories, assembly, transportation, and installation as specified. The cabinet shall be of rigid knock-down construction and fabricated from prime quality CRCA ‘D’ Grade steel conforming to IS: 513. The material thickness shall be as follows: Body panels: 0.6 mm thick (±0.07 mm) CRCA steel. Front frame and shelves: 0.8 mm thick (±0.08 mm) CRCA steel. The cabinet shall be provided with full-height steel hinged doors fitted with a recessed plastic handle integrated with a cam lock. The locking arrangement shall comprise a three-way locking mechanism with shooting bolts, ensuring secure storage and smooth operation. The shelves shall be designed to provide adequate strength for storage of files, records, and office materials, and shall be securely fixed or adjustable as per the manufacturer's standard specifications. All steel components shall be suitably pre-treated against corrosion and finished with epoxy polyester powder coating in the approved colour and shade, providing a durable, scratch-resistant, and corrosion-resistant finish. The item shall include all necessary shelves, locks, keys, handles, fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 46 | UPBEAT Meeting TableProviding and supplying UPBEAT Meeting Table with worktop height of 750 mm, complete with worktop, cube leg supports, integrated wire management system, fittings, hardware, accessories, assembly, transportation, and installation as specified. The table shall be supported on Cube-type metal legs fabricated using Argon Shield Welding, having a square-section profile and designed to support the worktop at a finished height of 750 mm from floor level. The leg assembly shall provide excellent structural stability and durability and shall be finished with approved epoxy polyester powder coating. The table shall be provided with an integrated wire management system, comprising a single power box suitable for 8 Module + 3 Module (8M+3M) Anchor Roma or approved equivalent modular electrical accessories, complete with a raiser for convenient access. The worktop shall incorporate a soft-closing dual access flap fitted with brush strips, facilitating neat routing and management of power, data, audio, and communication cables while preventing dust ingress. The table shall include all necessary cable management accessories, power box mounting provisions, fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 47 | Meeting Table – 1800 × 900 mm (UPBEAT Series)Providing and supplying UPBEAT Meeting/Conference Table of size 1800 mm (L) × 900 mm (W) with a worktop height of 750 mm, complete with worktop, cube leg supports, integrated wire management system, fittings, hardware, accessories, assembly, transportation, and installation as specified. The table shall be supported on Cube-type metal legs fabricated using Argon Shield Welding, having a square-section profile and designed to support the worktop at a finished height of 750 mm from floor level. The leg assembly shall provide excellent structural rigidity and stability and shall be finished with epoxy polyester powder coating of approved colour and finish. The table shall be provided with an integrated wire management system, comprising a single power box suitable for 8 Module + 3 Module (8M+3M) Anchor Roma or approved equivalent modular electrical accessories, complete with a raiser for convenient access to power and data connections. The worktop shall be provided with a soft-closing dual access flap fitted with brush strips, enabling organized routing of power, data, audio, and communication cables while protecting the cables from dust and damage. The item shall include all necessary cable management accessories, power box mounting provisions, fittings, fasteners, hardware, assembly, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 48 | Main WorktopMade of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap provided on work surface for wire management Return Worktop Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Modesty Panel Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2 mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on which a straight M8 lever fitted which allows for adjustment of the height upto 50mm. Make :- (As per Specified in Techanical specification of furniture of NIT). |
| 49 | Slotted Angle RackProviding and fixing Slotted Angle Rack of approved size and design, complete with vertical angles, horizontal supports, shelves, nuts, bolts, accessories, and installation as per the directions of the Engineer-in-Charge. The rack shall be fabricated from prime quality Mild Steel slotted angles and steel sheets of suitable thickness, designed for heavy-duty storage requirements. The structure shall consist of slotted angle vertical frames, horizontal cross members, and adjustable shelves fixed with high-quality nuts and bolts for easy assembly and future modifications. The shelves shall be adjustable in height to accommodate different storage requirements and shall be capable of carrying the required uniformly distributed load without deformation. All steel components shall be properly cleaned, treated against corrosion, and finished with approved epoxy polyester powder coating/paint finish for durability and long service life. The item shall include all necessary slotted angles, shelves, bracing members, nuts, bolts, washers, fasteners, accessories, transportation, assembly, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 50 | Witness Box (Teak Wood Work Only)Providing and fixing Witness Box of overall size 0.90 m × 0.90 m and 1200 mm height, with based 150mm high fabricated entirely from seasoned first-class teak wood of approved quality, including frame, posts, rails, panels, top member, mouldings, and all necessary wooden members, complete with smooth machine finish. The work shall include all necessary cutting, shaping, jointing, mortise and tenon joints, sanding, fitting, fixing, screws, wooden beads, approved brass/stainless steel hardware, polishing, and finishing, complete in all respects as per the approved drawing and the directions of the Engineer-in-Charge.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 51 | Judge Platform (Heavy Legs with Plywood Work & Polish Finish)Providing and fixing raised platform for Judge of overall size 2.50 m × 1.70 m and height up to 300 mm, fabricated with heavy-duty corner support legs and complete plywood work, as per approved design and directions of the Engineer-in-Charge. All plywood surfaces shall be properly fixed with necessary internal supports, screws, fasteners, and adhesives to achieve a rigid and durable structure. The exposed plywood surfaces shall be finished with approved laminate/polish finish, including proper sanding, surface preparation, edge finishing, and polishing work to provide a smooth and aesthetic appearance. The work shall include all necessary plywood, heavy corner legs, internal supports, cutting, shaping, jointing, fixing, hardware, polishing work, transportation, and installation complete in all respects as per approved drawings and instructions of the Engineer-in-Charge.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 52 | Weapon RackProviding and fixing Weapon Rack of size 6'-0\\" × 2'-0\\" × 2'-0\\" as per the approved design, drawings, and directions of the Engineer-in-Charge. The rack shall be fabricated using approved quality materials with rigid and durable construction suitable for safe storage. The rack shall include proper internal partitions, supports, shelves, and fixing arrangements as per the requirement of the Authority. All exposed surfaces shall be properly finished with approved paint finish to ensure durability and aesthetic appearance. The work shall include all necessary materials, cutting, fabrication, fittings, hardware, fasteners, locking arrangement (where required), surface finishing, transportation, and installation complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent. |
| 53 | Modular Kitchen CabinetProviding and fixing Modular Kitchen Cabinet below the kitchen platform of overall size 16'-0\\" × 11'-0\\" (or as per approved layout), comprising base cabinets, drawers, shelves, shutters, and accessories, complete in accordance with the approved design and drawings. The cabinets shall be manufactured from moisture-resistant Pre-Laminated Board (PLB) / BWP Grade plywood of approved thickness, with all exposed edges sealed using matching PVC edge banding. The shutters shall be provided with approved laminate finish, soft-close hinges, and premium quality handles. Drawers shall be fitted with heavy-duty telescopic soft-close channels, complete with cutlery trays and accessories wherever specified. The modular kitchen shall include base cabinets, drawer units, corner units, shelves, pull-out units, bottle pull-outs, sink unit, and other storage accessories as shown in the approved drawings or as directed by the Engineer-in-Charge. All fittings and hardware such as hinges, channels, handles, locks (where required), connectors, screws, and fasteners shall be of approved make and quality. The work shall be executed strictly as per the approved layout, dimensions, and the directions of the Engineer-in-Charge, including cutting, fitting, aligning, fixing, and making all adjustments necessary for complete installation. The item shall include all materials, labour, hardware, fittings, transportation, loading, unloading, assembly, installation, and finishing complete in all respects.Make: As specified in the Technical Specifications of Furniture (NIT) or approved equivalent |
| 54 | Water CoolerProviding and erecting water cooler having storage capacity 80Ltr. & cooling capacity 60 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. Make Blue Star, Voltas, UshaMake :- (As per Specified in Techanical specification of furniture of NIT) |
| 55 | Industrial Refrigirator Supplying and fixing Industrial type deep frezzer of 450 Ltr capacity.Make: Voltas VC Model NO: GT450Warranty : As per standardsMake :- (As per Specified in Techanical specification of furniture of NIT) |
| 56 | Double Door RefrigiratorSupplying & Installing 236L Caoacity Refrigerator Eon Regalis Frost Free double door with 3 shelves with toughened Glass shelf type with Inverter type compressor with size of standard specification. Make Samsung Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender