Tender For Rain Water Harvesting For G.P.S. Pajimol, G.H.S. Valkini Colony No.2 ,G.P.S. Valkini Colony No.3 In Sanguem Taluka.
Tender Overview
Project Description
Tender for Rain Water Harvesting For G.P.S. Pajimol, G.H.S. Valkini Colony No.2 ,G.P.S. Valkini Colony No.3 In Sanguem Taluka.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 11-Sep-2026 | The date of opening of Technical bid is mentioned E- Tender Notice may be read as 21/09/2026 instead of 21/08/2026. | Other | 18-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : a) All kinds of soil |
| 2 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 3 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:complete. a)All works upto plinth level |
| 4 | Providing and placing H.D.P.E. 10000 Litres capacity water storage |
| 5 | Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand ) in foundation and plinth size of blocks (30 x 20 x 15) In foundation and plinth |
| 6 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earthin layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 7 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double)socketed: 110 mm dia |
| 8 | Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : 110 mm dia |
| 9 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. Drainage pipes of approved including lubricating 110 mm dia |
| 10 | Providing and supplying PVC solvent |
| 11 | Procurment of Granitic / Basaltic aggregate a)50 mm |
| 12 | d) 20 mm |
| 13 | Procurment of Sand(river/manufactured:Coarse /fine) |
| 14 | (B) By mechanical transportincluding loading, unloading andstacking (B) Sand, stone metal and soling(ii) Stone metal 40 mm & above 5 to 10 km |
| 15 | (B) Sand, stone metal and soling(i) Sand stone metal below 40 mm 5 to 10 km |
| 16 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational mouldedpolythene water storage tank having I S I mark and conforming to I S 12701; 1996. 1000 lit. Capacity |
| 17 | Providing and fixing ball valve (brass) of approved quality : a) High pressure with P.V.C. floats: 1) 15 mm nominal bore |
| 18 | Providing and fixing 0.5 H.P Electric pump |
| 19 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778,having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internalwork exposed b) 20 mm outer dia CPVC pipe |
| 20 | providing and supplying PVC ball valve 110MM |
| 21 | 12mm cement plaster 1:3 (1 cement : 3 fine sand) for filter chamber |
| 22 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete. B.180 mm nominal size |
| 23 | Extra for providing and fixing prince or equivalent make PVC SWR running outlet with 2 clamps for socketed half round eaves gutters. B. 180 mm nominal size |
| 24 | Extra fjor providing and fixing prince or equivalent make PVC SWR 90 deg. Elbow with /without outlet with 2 clamps for socketed half round eaves gutters. B. 180 mm nominal size |
| 25 | Extra for providing and fixing prince or equivalent make PVC SWR stop end outlet with one clamp for socketed half round eaves gutters. B. 180 mm nominal size |
| 26 | Fabricating and erecting the steel structure of height 6 meters for placing the water tank of 1000 liters including Steel work in built up tubular (round, square or rectangular hollow tubes etc.) closed Structural Steel of (SAIL, TATA. VIZAG, JSW,APOLLO Steel Ltd.) make (Min Yield Stress 310 Map)) trusses etc., including cutting, hoisting, fixing in position, G.I. pipe 100mm dia for vertical support to embedded in concrete at least 50 cm below ground level, applying a priming coat of approved steel primer and black oil paint, including welding and bolted with special shaped washers etc. complete, placing cuddappa on top of the structure of required size and making electrical point for operation of .5HP centrifugal pump including all the electrical material etc complete as per the directions of the Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender