Tender For Short Term Maintenance Contract (Stmc) Estimate From Km 0/00 To Km 53/380 Of Nh-126A In The State Of Odisha For The Year 2026-27.
Tender Value
1.34 Crore
Estimated cost
Bid Submission
01 Oct 2026
17 days left
EMD
2.68 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Short Term Maintenance Contract (Stmc) Estimate From Km 0/00 To Km 53/380 Of Nh-126A In The State Of Odisha For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Part-I: ROAD MAINTENANCE |
| 2 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 |
| 3 | Removal of rank vegetation/weeds and undesirable vegetation from shoulders,embankment slopes up to ROW(bothsides) complete in all respects including breaking of clods,rough dressing and disposal of waste material and vegetation at a place outside ROW as per direction of Engineer-In-Charge and as per maintenance standards Clause no 3.1.(Frequency of cleaning will be one time in a quarter) |
| 4 | a) Shoulders including side slopes of embankment upto toe line both sides of the carriageway.(Frequency of cleaning will be four times in a year, however limited to only areas prone to growth of rank/undesirable vegetation and weeds) |
| 5 | Dismantaling W.C of Dhaurakhaman Bridge |
| 6 | Repairing W.C of Dhaurakhaman Bridge(Micro concrete Grade-M 35 as per Drawing and Technical Specifications.) |
| 7 | Part-II:ROAD PROPERTY MAINTENANCE |
| 8 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class- B type IV retroreflective sheeting fixed over 2mm thick aluminium sheeting vide clause 801.3, 3mm/4mm thick Aluminum composite material sheet depending on the size of the sign fixed over back support frame of min 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The signs shall be maintained as per section 12 of IRC 67 |
| 9 | Mandatory Signs |
| 10 | Stop Sign-90cm high octagon |
| 11 | Speed Limit -60cm circular |
| 12 | Noovertaking-60cm circular |
| 13 | Warning Sign |
| 14 | Curve Warning Sign-90cm equilateral triangle |
| 15 | TJunction ahead-90cm equilateral triangle |
| 16 | Cross road junction ahead -90cm equilateral triangle |
| 17 | Pedestrain Crossing-90cm equilateral triangle |
| 18 | School ahead-90cm equilateral triangle |
| 19 | Chevron Sign-60cmx45cm (Double Sided)l |
| 20 | Narrow Road Ahead-90cm equilateral triangle |
| 21 | Road Widen Ahead-90cm equilateral triangle |
| 22 | 30cm× 90 cm rectangular Hazard Sign |
| 23 | Informatory Sign |
| 24 | Filling station-80cm x60 cm rectangle |
| 25 | Hospital-80 cmx60 cm rectangle |
| 26 | BusStop-80cmx60cm rectangle |
| 27 | RoadMarkers/RoadStud with Lens ReflectorProviding and fixing of road stud 100x 100 mm, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973 |
| 28 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous on Bituminous SurfaceProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 29 | Delineator PostSupplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings. |
| 30 | Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces |
| 31 | Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade |
| 32 | Part-III: Pavement Repairs |
| 33 | Providing treatment and repair to pot holes/ruts and any depth/patch repair of all types of bitumen pavement complete as per technical Specification Clause 3004.2 and as per direction of Engineer By using paving grade bitumen/emulsion/cold ready mix material.The job includes removal of all failed material,trimming of completed excavation to providing firm vertical faces,cleaning of surface,painting of tack coat on the sides and base of excavation as per clause no 503 back filling the patch with bituminous material as per Clause no. 509 .Compacting trimming and finishing the surface to form a smooth continous surface all a per clause no. 3004.2 of Technical specification. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender