Tender For annual repair maintenance Of FciS Flats At Sky Scraper (Warden Road), Cuffe Castle (Colaba), Sarita (Bandra) & Zti Hostel In Mumbai For F.Y. 2026-27
Tender Value
58.70 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
10 days left
EMD
1.17 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair maintenance Of FciS Flats At Sky Scraper (Warden Road), Cuffe Castle (Colaba), Sarita (Bandra) & Zti Hostel In Mumbai For F.Y. 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of Unserviceable materials up to all lead and lift |
| 2 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chow hats, architrave, holdfasts etc. complete and stacking up to all lead and lift : Of area 3 sq. metres and below |
| 4 | Dismantling tile work in floors and roofs/wall laid in cement mortar including stacking material up to all lead and lift. : for thickness of tiles 10 mm to 25 mm |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 6 | 12 mm cement plaster of mix : 1:6 ( 1 Cement : 6 Fine Sand) |
| 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls. 20 mm nominal outer dia Pipes. |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 10 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm : Glazed vitified tiles Matt/Anti Skid finish of size 600 X 600. |
| 11 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 12 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 13 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete |
| 14 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore : 15mm nominal bore |
| 15 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 16 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 17 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 18 | Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 19 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453 X 357mm |
| 20 | Providing and fixing CP Brass Hand shower 105 mm Dia Round Shape Single Flow with air effect of quality & make as approved by Engineer in charge. |
| 21 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 22 | Providing and fixing C.P. Brass Angular Stop cock with wall flange of approved quality as approved by Engineer-in-charge |
| 23 | Providing and fixing C.P. brass Jet spray (Health Faucet) with stainless steel flexible tube and Wall Hook of approved quality as approved by Engineer-in-charge |
| 24 | Providing and fixing flexible stainless steel conector pipe to washbasin, geyser of approved quality as approved by Engineer-in-charge. |
| 25 | Providing and fixing C.P. Brass Diverter of approved quality as approved by Engineer-in-charge |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., c complete. : Size of Tile 600x600 mm |
| 27 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge |
| 28 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply. veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 29 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). |
| 30 | Providing and fixing to existing door frames.: 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. |
| 31 | Providing and fixing chromium plated brass 100 mm mortice/cylindrical latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 32 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 33 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm |
| 34 | Providing and fixing plain lining with necessary screws/nuts & bolts/nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). : 12mm thick commercial ply conforming to IS : 1328 BWR type |
| 35 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 36 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) |
| 37 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. |
| 38 | Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. |
| 39 | Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. |
| 40 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. : 200 mm |
| 41 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges,making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 25 mm average thickness |
| 42 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter |
| 43 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge :12 mm average thickness. |
| 44 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.:25 mm average thickness in 2 layers. |
| 45 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore metre |
| 46 | Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. |
| 47 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 48 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 49 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 50 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 51 | Melamine polishing on wood work (one or more coat) |
| 52 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm |
| 53 | Disposal of material from 19 th floor, 17 th floor, 13 th floor, 12th floor, 11th floor, 10 th floor, 7th floor, 3rd floor and 2nd floor to ground floor then to dumping Yard of society then to BMC Dumpyard by BMC more than 2.50 km lead as approved by engineer in charge |
| 54 | Repair & Servicing to Aluminium sliding windows shutters for smooth & easy functioning including removing cleaning & refixing the shutters, track pipe frames etc. With necessary screws & replacing damaged/ worn out parts like glass panes, bearing, lock & aluminium section if any etc. complete as directed by Engineer-in-charge (Material like glass panes bearing locks PVC bearing aluminium section except screws shall be paid separately) |
| 55 | Providing and fixing C.P.Brass Bathtub spout with wall flange of approved quality as approved by Engineer in charge |
| 56 | Providing and fixing Kitchen Sink Tap Faucet(wall mount installation and Siphonic type with movable spout) of approved design,make , type and quality as approved by Engineer in charge |
| 57 | Providing lambi putty with oil based primer before the execution of Royale paint for level and smooth surface as per the direction of engineer in charge |
| 58 | Providing and fixing decorative fluted PVC pannelling 10mm thick of design and colour as approved by engineer in charge. |
| 59 | Providing and fixing factory made uPVC glazed/wire mesh windows comprising of lead-free uPVC multi-chambered R4 series extruded profiles conforming to EN 12608, duly reinforced with galvanized mild steel sections of required shape and size, uPVC glazing beads, EPDM gasket, interlocks, inline sash adaptor (wherever required), SS-304 grade fasteners, matching polyamide sleeves, complete with rollers, locking arrangement, handles and all accessories, with frame and sash mitre cut and fusion welded, including fixing in position complete, for two-track four-panel sliding window. Glazing shall be measured and paid separately.Two track four panels sliding windows with aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS-304 body. Using R3 series with frame (55 mm & above) × (40 mm & above) and sash (30 mm & above) × (55 mm & above) (Height upto 1.8 m) |
| 60 | Providing and fixing factory made uPVC glazed/wire mesh windows comprising of lead-free uPVC multi-chambered R4 series extruded profiles conforming to EN 12608, duly reinforced with galvanized mild steel sections of required shape and size, uPVC glazing beads, EPDM gasket, interlocks, inline sash adaptor (wherever required), SS-304 grade fasteners, matching polyamide sleeves, complete with rollers, locking arrangement, handles and all accessories, with frame and sash mitre cut and fusion welded, including fixing in position complete, for two-track four-panel sliding window. Glazing shall be measured and paid separately.Two track four panels sliding windows with aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS-304 body. Using R4 series with frame (64 mm & above) × (45 mm & above) and sash (44 mm & above) × (55 mm & above) (Height above 1.8 m). |
| 61 | Providing and fixing 6mm Toughened glass of standard design, quality & make as approved by Engineer in charge. |
| 62 | Supply of Skilled (i.e. Fitter/Mason /plumber/ carpenter etc. all grade-1) and Unskilled (i.e. Beldar/Coolie etc.) labour on daily basis for attending to repairs and maintenance of the FCI's quarters at all locations in Mumbai. :Skilled labour (Plumber / Carpentar) |
| 63 | Supply of Skilled (i.e. Fitter/Mason /plumber/ carpenter etc. all grade-1) and Unskilled (i.e. Beldar/Coolie etc.) labour on daily basis for attending to repairs and maintenance of the FCI's quarters at all locations in Mumbai.: Unskilled labour |
| 64 | Credit for taking away dismantled un/ser. Material on As is WHERE basis :PVC flushing cistern |
| 65 | Credit for taking away dismantled un/ser. Material on As is WHERE basis: Door/window shutter |
| 66 | Credit for taking away dismantled un/ser. Material on As is WHERE basis: Wash basin |
| 67 | Credit for taking away dismantled un/ser. Material on As is WHERE basis: Brass Bib/stop/Angle/Night latch/door bolt etc |
| 68 | Credit for taking away dismantled un/ser. Material on As is WHERE basis: Aluminium Scrap |
| 69 | Credit for taking away dismantled un/ser. Material on As is WHERE basis:G.I .pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender