Tender For Srw To Bdy Wall, Drain And Staff Toilet & Bathroom At Sm-103 At Vikram Path Under Ge (Mcte) Mhow
Tender Value
48.53 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
1 days left
EMD
97060
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Srw To Bdy Wall, Drain And Staff Toilet & Bathroom At Sm-103 At Vikram Path Under Ge (Mcte) Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-Sep-2026 |
| 2 | 30-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 2 | Demolition of store slabs and tiles of any discription or thickness in floors/ walls laid bedded and pointed in any mortar complete all as specified and directed. |
| 3 | Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone work etc. complete all as specified and directed. |
| 4 | Dismantling polycarbonate sheet (transparent/ plain or corrugated) any thick in roof covering including Nainital or similar pattern Roof covering complete all as specified and directed. |
| 5 | S&F Poly carbonate sheet (transparent/ plain/ coloured or corrugated sheeting 10mm thick as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 6 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 7 | S&F Steel work in tubular trusses including special shaped washer etc. as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee,channel pipes, tubes, and flat sections etc) including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar S&F Steel work in tubular trusses including special shaped washer etc. as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee,channel pipes , tubes, and flat sections etc) including distances pieces, cleats etc cutting half brick thick wall and fixing with cement mortar of grade FE-410, (gde-E-250 quality complete all as speified and directed. |
| 8 | S&F for rolled section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters (beam, tee, angle, channel pipes, tubes, plates and flat sections etc) including distances pieces, cleats etc. cutting half brick thick wall and fixing with cement mortar of grade FE-410, (gde-E-250) quality complete all as specified and directed. |
| 9 | S&F MS plates (plain or chequred) channels square cut to or notched forming holes with riveted bolted or welded attachment for FE-410 W, complete all as specified and directed. |
| 10 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5 cm & n.exc. 30 cm long dia of shank 16 to 20mm complete all as specified and directed. |
| 11 | M&L for providing stainless steel for railing/ cladding for balcony consisting stainless steel pipes of different dia including socket, reducer, knobs balls and cups of matt finish, type and size as approved, complete all as specified and directed. |
| 12 | M&L for toughened glass 12mm thick for railing/ cladding for balcony or wall including all necessary fiiong complete all as specified and directed. |
| 13 | Taking down Shutters of any description exc. 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed. |
| 14 | Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and directed. |
| 15 | Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each complete all as specified and directed. |
| 16 | S&F Pressed steel frame for door, size 165 x 60 x 1mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 17 | S&F Pressed steel frame for door, size 105 x 60 x 1mm with one rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 18 | S&F Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/ gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8.20 (a), complete all as specified and directed. |
| 19 | S&F 35mm thick second class hardwood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both side (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers moulded on solid (for each side) supplied and fittrd to chowkhat complete all as specified and directed. |
| 20 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. tube, complete all as specified and directed. |
| 21 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge, Paneling of 2mm thick prelam PVC sheet on bothfaces i.e front face & back face with particle board core to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, and including all hardware necessary for a door supplying & fixing in the frame at site as per specification & drawing. given SSR 2010 complete all as specified and directed. |
| 22 | S&F Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 of size 100mm complete all as specified and directed. |
| 23 | S&F Aluminium handle cast type anodised size 150mm long complete all as specified and directed. |
| 24 | S&F aluminium anodised barrel tower bolts of extruded section with 150mm long bolt, complete all as specified and directed. |
| 25 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed |
| 26 | M&L for stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 27 | S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate, Helical spring complete all as specified and directed. |
| 28 | S&F double legged door stopper of aluminium alloy with rubber complete all as specified and directed. |
| 29 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 30 | M&L for preparation of old wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 31 | M&L for Providing cement concrete type B-0 1:2:4 (using 12.5mm graded stone aggregate) for filling of pressed steel frame etc. rounded or chamfered on edges complete all as specified and directed. |
| 32 | M&L for Vitrified (double charged) tiles 7 to 8mm thick of any shade (square/ rectangular) area of each tiles as in floors exc. 0.42 and not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed. |
| 33 | All as per Srl item No. 24.00 above but, on vetical surface such as skirting including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed |
| 34 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile as in floor exceeding 0.11 and not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed. |
| 35 | M&L for glazed ceramic coloured wall tiles, (textured and design as required) in vartical surface 450 x 300 x 7mm thick, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 36 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 37 | M&L for machine cut mirror polished kota stone slab flooring with rounded edge 20-25mm thick over cement screed bed in CM 1:6 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab complete all as specified and directed. |
| 38 | M&L for machine cut kota stone 18-20mm thick in skirting, riser of steps skirting, dado and pillar over 10mm thick backing coat in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including grinding and mirror polishing complete all as specified and directed. |
| 39 | Mirror polish of old kota stone (seven polished) complete all as specified and directed. |
| 40 | M&L for Brick work built in cement mortar 1:6 usin sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius complete all as specified and directed. |
| 41 | M&L for Brick work with modular size kiln well burnt sub-class 'B' bricks, straight or curved on plan to any radius, in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 42 | Demolition of cement concrete (un-reinforced) in ground floor & paving n. exc 15 cm thickness and removal of debris from site comlplete all as specified and directed. |
| 43 | M&L for hardcore of broken stone or bounders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a floor/ true surface, complete all as specified and directed. |
| 44 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass concrete as in foundation filling and mass concrete complete all as specified and directed |
| 45 | M&L for cement concrete type B-1, 1:2:4 mix using 20mm graded stone aggrgates as in benching including necessary fromwork, complete all as specified and directed. |
| 46 | M&L for cement concrete type B-1, 1:2:4 mix using 20mm graded stone aggrgates in bed blocks, coping etc. including necessary fromwork, complete all as specified and directed. |
| 47 | Extra for forming fair finished to channel or drain 30 cm inner girth in cement concrete using extra cement including mitred/ stopped ends, frames mould etc; complete all as specified and directed. |
| 48 | Providing pre cast reinforced concrete type B-1, 1:2:4 mix using 20mm graded stone aggrgates for cover slab, set in CM 1:4 including necessary fromwork, complete all as specified and directed. |
| 49 | M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-40 grade laid dry in floor/ path with and including 50mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified and directed. |
| 50 | M&L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair including cutting joints and filling with bitumen and sand mixture complete all as specified and directed. |
| 51 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 52 | M&L for RCC Nominal mix type A-1 1: 1.5: 3 (20mm graded aggregate) as in lintels, plinth beams, bands, coping etc. including necessary fromwork complete all as specified and directed. |
| 53 | Formwork to sides of pillars, posts, struts, columns etc. rough finished surfaces of concrete complete all as specified and directed. |
| 54 | M&L for RCC Nominal mix type A-1; 1.5;3 (using 20mm graded stone aggregate) as in column pillars post and strts etc. complete all as specified and directed. |
| 55 | Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 56 | M&L for RCC type A-1, 1:1.5:3 (20mm graded aggregate) in chajja, roofs, landing, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 57 | M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 58 | M&L for Mild steel TMT bars 6mm dia to 10mm dia length bend to shape required, including cranking bending spirally for column, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securing with chip), complete all as specified and directed. |
| 59 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 60 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 61 | M&L for prepration of new wall surfaces & applying birla/ JK wall care white putty 2mm thick for levelling the surfaces and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls etc. complete all as specified and directed. |
| 62 | M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed. |
| 63 | M&L for Prepration of new surfaces and applying two coats exterior weather coat over one coat of exterior primer over and including 2mm thick wall putty etc complete all as specified and directed. |
| 64 | M&L for complete removal of existing treatment from wall by scrapping of surfaces of old decorated walls etc, and applying Birla/ JK wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed. |
| 65 | M&L for complete removal of existing treatment from walls by scrapping & washing etc and applying Birla/ J.K. wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 66 | M&L for Rendering 05mm thick on fair faces of concrete surface of ceiling, chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and directed. |
| 67 | M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and directed. |
| 68 | M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 69 | Supply only integral water proofing compound complete all as specified and directed. |
| 70 | M&L for preparation of old plastered surfaces and applying two coats of cement base paint on wall complete all as specified and directed. |
| 71 | Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized steel colour coated/powder coated (base steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams/ Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primere of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws conforms to IS - 513:2008 complete all as specified and directed. |
| 72 | Providing and fixing pre painted steel sliding window 3-track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized steel colour coated/ powder coated (Base Steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 GM/Sqm) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 507 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107 x 44mm, Section for shutter should be of 35 x 49mm. Section of mesh should be of 35 x 49mm. The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine monomer (EPDM). The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws conforms to IS-513:2008 complete all as specified and directed. |
| 73 | S&F mild steel framed work such as grills, gratings, gates etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed. |
| 74 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed. |
| 75 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed. |
| 76 | S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification. |
| 77 | S&F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. complete all as specified and directed. |
| 78 | M&L for providing PVC WALL PANELLING of 5mm thick consisting of panel of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelaminated PVC sheet. The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company. The strips should have in their centre a gove of 6mm widht and 1mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement complete all as specified and directed. |
| 79 | S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc. complete all as specified and directed. |
| 80 | S&F self closing stainless steel hinges 75mm size for PVC door shutter complete all as specified and directed. |
| 81 | S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed. |
| 82 | S&F 100mm size, MS mat/ glossy finish handle complete all as specified and directed |
| 83 | S&F door spring 150mm, mild steel rat tail rod pattern of standard quality including roller and roller plate complete all as specified and directed. |
| 84 | S&F modular type stainless steel cutlery basket size 20 x 19 x 4 inches 9 dia of wire not less than 3.0mm of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed. |
| 85 | All as per Srl item No. 81.00 as above but plain basket size 20 x 19 x 6 inches complete all as specified and directed. |
| 86 | All as per Srl item No. 81.00 as above but thali basket size 20 x 19 x 8 inches complete all as specified and directed. |
| 87 | All as per Srl item No. 81.00 as above but cup & saucer basket size 20 x 19 x 4 inches complete all as specified and directed. |
| 88 | All as per Srl item No. 81.00 as above but grain basket size 20 x 19 x 6 inches complete all as specified and directed. |
| 89 | All as per Srl item No. 81.00 as above but plain basket size 20 x 19 x 8 inches complete all as specified and directed. |
| 90 | S&F in repairs Vitreous China Thin Rim Table Top Basin. Shape -Round, Size 360 x 360 x 120mm complete all as specified and directed. |
| 91 | S & F in repair Vitreous China wash down water closet pan pedestal pattern, white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoging pipe) and flushing pipe, antisiphonage pipe etc. complete all as specified and directed. |
| 92 | S&F in repair vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed. |
| 93 | S&F in repair Vitreous china water closet rimless one piece EWC with slim sofit close seat cover 660 x 350 x 745mm concelled S trap for better aesthetic snow white - whiter than whitest complete all as specified and directed. |
| 94 | S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe complete all as specified and directed. |
| 95 | S&F in repair Looking mirror 6.3mm thick exc. 5.50 each pane, Grinding, polishing and rounding edge of glass, drilling holes in glass any type fixed on wall with chorminum plated screws complete all as specified and directed. |
| 96 | S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 97 | S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 98 | S&F in repair chromium plated brass Sink mixer waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 99 | S & F in repairs Bib tab swan neck 15mm bore cast copper fancy type chromium plated with crutch or butter fly handle serwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 100 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 101 | S&F in repair kitchen plate rack with and including shelves and hanging arrangement for utensi for kitchen, made of stainless steel sheet 0.63mm thick size 30\\" x 36\\" x 10\\" complete all as specifed and directed. |
| 102 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed. |
| 103 | S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed. |
| 104 | S&F Grating 100mm dia of CP with or without hole complete all as specified and ditrected. |
| 105 | S & F in repairs Bib tab 15mm bore cast copper fancy type chromium plated with crutch or butter fly handle serwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 106 | S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 107 | S&F in repairs Stop/ angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 108 | S&F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 109 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. |
| 110 | S&F in repair Brass Butter Fly Jet Spray with 1.2 meter Long Flexible Tube of premium quality fittled to vitreous china, wash down water closet pan (pedestal pattern), Stop cock/ angle cock complete all as specified and ditrected. |
| 111 | S&F in repair 8mm Corner Glass Shelf of size 320 x 320mm with silver chromium finished border Over Range premium quality complete all as specified and ditrected. |
| 112 | S&F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall complete all as specified and directed. |
| 113 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed. |
| 114 | Supply, laying and testing for 16mm bore of CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings in wall all fittings such as union, reducer, sockets, reducing bends elbows tee, FTA, MTA, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 115 | Taking up or down steel tubing and connections, tube 20mm bore complete all as specifed and directed. |
| 116 | Supply, laying and testing for 25mm bore of CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings in wall all fittings such as union, reducer, sockets, reducing bends elbows tee, FTA, MTA, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 117 | Cutting chases, pinning in making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, subshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting n.exc 10cm girth in stone complete all as specified and directed. |
| 118 | Taking down old PVC or AC rainwater/ wastes/ vent pipes (any size or pattern) including all fitting, heads, shoes, bends, swan-necks etc. complete all as specified and directed. |
| 119 | S & F in repairs 75mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 120 | S & F in repairs 110mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 121 | S&F PVC (SWR) Bends/ door bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as specified and directed. |
| 122 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed. |
| 123 | S&F PVC (SWR) Bends/ door bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as specified and directed. |
| 124 | S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as specified and directed. |
| 125 | S&F PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete all as specified and directed. |
| 126 | S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as specified and directed. |
| 127 | Dismantling PVC water tanks 500 & 1000 litres capacity complete all as specified and directed. |
| 128 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I, complete all as specified and directed. |
| 129 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15 to 25mm to 142 - 455 gms). |
| 130 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 131 | Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs, complete all as specified and directed. |
| 132 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) etc. complete all as specified and directed. |
| 133 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 134 | M&L for Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 135 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 136 | Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed. |
| 137 | M&L for 10mm thick screed bed on concrete surfaces in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed. |
| 138 | M&L for PCC 40mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/50Kg cemet of DR fixit of pidilite industries Ltd or STP No.1 (Liquid) of STP Ltd in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/ chhaja and roof kerbs/ benching complete all as specified and directed. |
| 139 | M&L for water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/Sqm. The height of the roof may upto 9 m comprising with following items complete all as specified and directed:- (i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.(ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.(iii) Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.(v) Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3mm thick composed of woven polyster center core, which is sandwitched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps as per manufacture instruction etc. |
| 140 | Taking down carefully copper/ aluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendens, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed. |
| 141 | Taking down ceiling fan/ exhaust fan of any sweep after disconnection all necessary electric connection from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M-III, Mhow complete all as specified and directed. |
| 142 | Taking down carefully copper/ aluminium sub-main wiring any size from surfaces/ concealed/ existing conduit of any height and removing materials at site and making good the disturbed surface of walls, floors and roofs etc. complete all as specified and directed. |
| 143 | M & L for Point wiring for One light/ bell controlled by one, one way switch 5/6 Amps with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc., complete all as specified and directed. |
| 144 | All as per Srl item No. 126.00 above but One 3 pin, 5/6 Amps switch, socket outlet point on same board controlled by one, one way 5/6 Amps switch |
| 145 | All as per Srl item No. 126.00 above but One 3 pin, 5/6 Amps switch socket outlet point on independent board controlled by one, one way 5/6 Amps switch |
| 146 | All as per Srl item No. 4.00 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 2.5 Sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed.Note:- Make of modular GI box should be same with switch/ socket. |
| 147 | S&F Modular Switch flush type 5/6 Amps single pole, one way complete all as specified and directed. |
| 148 | S&F Modular Switch flush type 15/16 Amps single pole, one way complete all as specified and directed. |
| 149 | S&F Modular Socket outlet, multi purpose having provision, 3 pin, 5/6 Amps and 2 pin, 5/6 Amp, 2 Modular piano flush type complete all as specified and directed. |
| 150 | S&F Modular Socket outlet, multi purpose having provision, 3 pin, 15/16 Amps and 3 pin, 5/6 Amp, 2 Modular piano flush type complete all as specified and directed. |
| 151 | S&F for Ceiling rose, surface bakelite with three terminals ISI marked, AC, 50 HZ, 230V, complete all as specified and directed. |
| 152 | M&L for Sub main wiring with approval colour coding as per IS with two single core PVC insulated FRLSH cable multistranded copper conductor if size 4 Sqmm nomonal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories heavy duty ISI marked of suitable size including concealed in wall etc. one runs of PVC insulated with 4.0 Sqmm (nomonal area) multistranded copper conductor FRLSH cable as earth wire complete all as specified and directed.Note:- Two runs of 4.0 Sqmm for P and N and one run of same size earth and one run of PVC conduit will be measured as one unit length. |
| 153 | S&F lamp holder PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings, complete all as specified and directed. |
| 154 | S&F LED bulb of 10 watt, of base B-22, 6500 K suitable for fixing in lamp holder, complete all as specified and directed. |
| 155 | Supply and fixing Inverter LED batten 4 feet 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 3 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed. |
| 156 | S&F in repair 10W LED 6500K lights fitting Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories, complete all as specified and directed. |
| 157 | S&F for energy saving recess/ surface mounted luminaire 36/ 40/ 42W, high efficiency PMMA diffuser gives soft glare free light, suitable for 600 x 600 ceiling cut out, recess mounted 36W LED luminaire in MS housing (2' x 2') incl Provn of three core cable of copper conductor of size 1.5 sqmm, making necessary electric connetion from ceiling rose to fitting terminal, fixing the fitting on ceiling including cutting, grooving with proper finish and making good, disturbed surface with all fixing arrangement including taking down old unsv complete all as specified and directed. |
| 158 | S&F of MCB DB SPN 8 way dounle door with 200 Amp rated bus bar, 230 volts 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc including taking down old unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. |
| 159 | S&F MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 160 | Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 161 | S&F in replacement of exhaust fan, steel body, AC single phase 230/ 240 V of size 300mm sweep complete with blade, frame including making/ alteration of hole wherever necessary making good disturbed surfaces painting to match with existing surfaces and deposite and exhaust fan to MES E/M store complete all as specified and directed. |
| 162 | Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. |
| 163 | S&F of ceiling fans complete with blades, down rods 15mm/ 12mm upto two mtr, run with electronic regulator or remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and winding material super enameled copper wire rated power 28W (+10%) and rate speed 350 RPM (+10%) power factor 0.90 Min air delivery 220 CFM with service value shall not be less than 7.85 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including taking down old unsv fans and deposit the same in the MES store yard of AGE E/M-III, complete all as specified and directed. |
| 164 | Supply, installation, testing and commissioning of 3.5 to 4 mtr dia GI ring 40 to 80mm bore size of pipe with socket, stands support, nut bolt and and suitable size of gate valve etc. complete all as specified and directed. |
| 165 | Supply, installation, testing and commissioning of crown Nozzle complete all as specified and directed. |
| 166 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of size 40/50mm bore, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 05, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender