Tender For Repair/Resurfacing Of Roads,Road Marking Paint And Replacement Of Damged Road Furniture Etc To Roads In Otm /Md Accn Of Hq Meg & Centre , Banaswadi Area & Aor Of Age B/R (Meg) Under Ge(North) Bangalore.
Tender Value
76.80 Lakhs
Estimated cost
Bid Submission
09 Oct 2026
25 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Resurfacing Of Roads,Road Marking Paint And Replacement Of Damged Road Furniture Etc To Roads In Otm /Md Accn Of Hq Meg & Centre , Banaswadi Area & Aor Of Age B/R (Meg) Under Ge(North) Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for repairs to pot holes of any depth not exc 1.00 sqm each in area including sweeping free from dust and mud or water, scoring the sunken surfaces in roads etc cutting around edges to at least 25 mm in depth , making good by applying tack coat @ 5 kg per 10 Sqm (using paving bitumen of VG-10 grade), putting in premixed bituminous macadam, well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and as directed. |
| 2 | M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and as directed. |
| 3 | M & L for Applying evenly a priming/ tack coat with bituminous primer using paving bitumen of VG-10 grade @ 5 Kg. Per 10 Sq. Metres.complete all as specified and as directed. |
| 4 | M&L for Bituminous premix semi dense asphaltic concrete, 30 mm consolidated thickness with 5.5% binder content by weight of total mix by using Paving bitumen (VG-30 grade) as in semi dense asphaltik concrete mixed in hot mix plant, rolled with 8 to 10tonne power roller and compacted to required camber and gradient complete all as specified and as directed. |
| 5 | Material and Labour for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n. exc 400 sqm and depth exc 50mm and not exc 100mm etc complete all as specified and as directed. |
| 6 | M & L for premix dense bituminous macadam(Design Mix) 50mm consolidated thickness with minimum 40-60 TPH bach type HMP using crushed stone aggregates of specified grading, premixed with VG-30 bituminous binder @ 4.00% by weight of total mix and cement as a filler, transporting the hot mix to work site, laying with a hydrostatic paver finished to the required grade, level and alighnment, rolling with smooth wheeled, vibratory and tindem roller to achieve the dezire compaction as per MORTH specification clause no 505 complete in all respects, etc, complete all as specified and as directed. |
| 7 | M& L for preparing bituminous surface of road and marking 2.5mm thick including reflectorizing glass beads centre line,stop lines,dashes,arrows etc. and the like exceeding 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS-3262-1989 with special applicator machine fitted with pufill shoe glass beads dispenser pupane tank heater and profile shoe heater with heating arrangement upto 160 degree C driven by experienced operator all as per manufacturer instruction complete all as specified and as directed.Note:- 1. Unit rate quoted by the contractor include for provision of red signals to keep off trafic from work. cleaning road surface and working during odd hours when trafic is light. 2. The line marking shall stand out boldly and solidly without showing any signs of scrach marks or suefaces underneath, if necessary the surface shall be remarked after removal of existing treatment untill the desired result is obtained. |
| 8 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 9 | Dismantling of stone slabs and tiles laid dry, or laid dry bedded and pointed of any description or thickness in floors, aprons etc. complete all as specified and as directed. |
| 10 | M&L for Plain cement concrete (1:4:8) Type D-2 with using 40 mm graded crushed stone aggregates as in foundations and mass concrete etc complete all as specified and as directed. |
| 11 | M& L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3(1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specfied and as directed. |
| 12 | M & L for 75 mm thick PCC (1:4:8) type D-2 using (40mm graded crushed stone aggregates) as in sub base of flooring etc complete all as specified and as directed. |
| 13 | Supply and spreading of M-sand as cushioning to interlocking tiles including watering and consolidation complete all as specified and directed |
| 14 | M&L for machine presssd Pre-Cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed. |
| 15 | M&L for cement concrete (1:2:4) type B0 using 12.5mm graded crushed stone aggregates as in copings, Chajja /kerbs stone, roof padding/staging of water tank etc, including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 16 | M&L for preparing new concrete surface (Kerb Stone) and applying two coats of synthetic enamel paint over a coat of primer etc complete all as specified and as directed. |
| 17 | M & L for 100 mm thick Moorum/red bajri filling as in road berms or paving’s as in berms, spread, levelled and rammed including watering etc complete all as specified and as directed. |
| 18 | Supply and fixing in repairs metal tubular delineator in repair made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) (200x200x300mm) type B1 using 20 mm graded crushed stone aggregates complete all as specified and as directed. |
| 19 | S & F in repairs cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector of model no DA 972 fixed with and including MS stud of suitable size all as per manufacturers instructions and as directed. |
| 20 | S & F in repairs Solar Cat eye aluminium alloy shall(100% water proofing design according to 65) of size 125 mm x125 mm x 25 mm(Shank 65 mm) of high efficiency Mono rystafie solar panel 2.4 v/0.3 watt one NI-ed rechargeable battery(1.2v/1600MA) consisting of super bright LED with 10000 to 18000 mcd completed as per manufacturers instructions etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 32 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender