Tender For Special Repair/Replacement To Water Supply Pipeline Of Various Size And Service Tanks Alongwith Related Works At Certain Locations At Afac Coimbatore.
Tender Value
26.15 Lakhs
Estimated cost
Bid Submission
08 Oct 2026
4 days left
EMD
52310
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair/Replacement To Water Supply Pipeline Of Various Size And Service Tanks Alongwith Related Works At Certain Locations At Afac Coimbatore.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 15mm bore complete all as specified and directed. |
| 2 | Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 20 mm bore complete all as specified and directed. |
| 3 | Taking up or down steel tubing and connections, and removing to store for taking in account of credit for 40 mm bore complete all as specified and directed. |
| 4 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)40/50mm complete all as specified and directed. |
| 5 | Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorscomplete all as specified and directed. |
| 6 | Supplying and laying of CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 7 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.CPVC PIPE OUTER DIAMETER 40 MM complete all as specified and directed. |
| 8 | Disconnecting existings PVC water tank capacity exc 500 ltr and n exc 1000 ltr, setting a side (or lowering if required) for repairs, claening, etc. and hoisting if required reconnecting and refixing in position complete all as specified and directed. (Cleaning repairings, etc. measured sepaeately). |
| 9 | Dismantling water tanks and removing to store capacity in litres exc 500 but nexc 1000 complete all as specified and directed. |
| 10 | Supply & Fixing for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity in ltrs 500 complete all as specified and directed. |
| 11 | Supply & Fixing for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity in ltrs 1000 complete all as specified and directed. |
| 12 | Supply & Fixing for Tank Adaptor for CPVC pipe outer dia 25 mm complete all as specified and directed. |
| 13 | Supply & Fixing for 25mm Nipple suitable for HDPE water tank.(Minimum weight 25mm- 65gms) complete all as specified and directed. |
| 14 | Supply & Fixing for union for CPVC pipe outer dia 20 mm complete all as specified and directed. |
| 15 | Supply & Fixing for union for CPVC pipe outer dia 25 mm complete all as specified and directed. |
| 16 | Supply & Fixing for Stop valves25mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 17 | Supply & Fixing for Gun-metal 20 mm, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed V |
| 18 | Supply & Fixing for Gun-metal 25 mm, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 19 | Supply & Fixing for Gun-metal 40 mm, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 20 | Supply & Fixing for Ball brass valves 20mm , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 21 | Supply & Fixing for Ball brass valves 25mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 22 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 23 | Material & Labour for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 24 | Material and labour for complete removal of existing treatment from old wall surfaces and finishing walls with Acrylic Smooth exterior paint of required shade over priming coat of exterior primer all as specified and directed. (Height of bldg upto 15 mtrs) |
| 25 | Supply & Fixing in repairs Bib taps, brass chromium plated fancy type with wall flange screwed down, fixed for 20mm bore. Make : Parryware . Model No :T7204A1 or equivalent in Soma/Leader/JAQUAR & CO. PVT.LTD (JAQUAR) all as per specified. |
| 26 | Removal of Plants/ Shrubs grown on walls/ slabs/beams by making holes or demolition of concrete etc and including applying suitable chemical for killing the roots of Plants, filling of holes with concrete and making good complete all as specified and directed. |
| 27 | Chipping/removing loose concrete in cloumns/beams/ chajjas/roof slab etc. up to reinforcement bars without damaging the reinforcement, removing all the loose material and to make all the exposed surface free from dust and all impurities etc complete all specified and directed. |
| 28 | Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution Reebaklens RR of Fosroc / Sika Rust off 100 / equivalent in bostic India Ltd by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying anti corrosive coating to reinforcement Nitozinc primer of Fosroc/Sika Friazinc R / equivalent in Bostic india Ltd , all as recommended by product manufacturer. |
| 29 | Providing and applying one coat of structural grade epoxy coat by brush of approved make . Mixing of two components will be as directed by manufacturer .Application shall be provided not more than 5 hours before application of micro concrete/polymer mortar etc complete all as specified by the manufacturer. Make :- Nitobond EP of FOSROCK/ Sikdur 32LP/ equivalent in Bostic India Ltd |
| 30 | Providing and applying n exc 40 mm thick (In layers of each 10mm thick) Shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar Renderoc SP 40 of Fosroc / Sika plastocrete plus/ equivalent in bostic India ltd, mixed with water in a water & powder ratio 0.18 in ceiling of roof slab/Chajjas/Beams/Parapet walls etcNote:- Quoted tate is deemed to be inclusive of provideing scaffolding for working in patches upto a height of 15 Mtr complete all as specified and directed. |
| 31 | Supply and application of single component, seamless, spray applied, hybrid elastomeric PU based material i.e Nitoproof 725 of Fosroc chemicals (or) sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE over a coat of primer i.e Nitoproof WB primer of Fosroc chemicals (or) diluted sikalastic 590 of Sika India Pvt Ltd (or) equivalent in any approved make as approved by GE, work in patches of min 1 Sqm all as specified and directed by Engr-in Charge |
| 32 | Material & Labour for precast cement concrete block masonry with solid blocks exc 10 cm in width in PCC 1:2:4 type B-1 and setting in cement mortar 1:4 complete all as specified and directed. |
| 33 | Material & Labour for providing cement concrete type B1 (1:2:4) 20mm graded aggregate in bed plates for water tank base etc and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 34 | Mild steel TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 35 | Material & Labour for flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 36 | Material & Labour for Rendering with WPC in CM 1:4, 15mm thick on other than fair faces of brick work or concrete surfaces all as specified and directed. Note : WPC shall be measured and paid separately |
| 37 | Supply & Fixing for Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 40 or 50 mm complete all as specified and directed. |
| 38 | Supply & Fixing for 110 mm radius PVC (SWR) bends complete all as specified and directed. |
| 39 | Supply & Fixing in repairs 110 mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed. |
| 40 | Supply & Fixing for 75 mm radius PVC (SWR) bends complete all as specified and directed. |
| 41 | Supply & Fixing in repairs 75mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed. |
| 42 | Surface excavation not exc 30 cm and averaging 15 cm deep and getting out in Hard/Dense soil, all as specified. |
| 43 | Material & Labour for 100mm thick broken stone or boulder,Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. |
| 44 | Material & Labour for Cement concrete in foundations, filling and mass concrete type D2 (1:4:8) 40 mm graded aggregate complete all as specified and directed. |
| 45 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 46 | Removal of debris/building material out side the campus including loading and unloading, etc to a distance exc 5Km but n exc 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement. |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysOct 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender