Tender For Repair/Replacemet Transformer, Ht Cable And Overhead Line And E/M Installation At ,South C , North And Mutaga C At Ats Belagavi
Tender Value
25.98 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
18 days left
EMD
52000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Belagavi → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacemet Transformer, Ht Cable And Overhead Line And E/M Installation At ,South C , North And Mutaga C At Ats Belagavi
BOQ
| Sl. No. | Item Description |
| 1 | Dehydration & filtration of old/ existing transformer oil including topping up of transformer oil with portable filtration cum dehydration machine to improve the dielectric strength minimium 60 KV within 1 minute with 4 mm Gap at site of any installation in GE(AF) SAMBRA area of any capacity/make of transformer installed on pole mounted, indoor/outdoor type plinth mounted complete all as specified and as directed.Notes : (i) All necessary T&P / testing equipment/dis connection /re-connection of electric supply and shall be provided by the contractor at his own cost. No extra payment shall be made to the contractor. (ii) Contractor shall ensure that there shall be no wastage of transformer oil. (iii) Contractor shall ensure that conservator tank is full to its level before starting the dehydration.(iv) New Transformer Oil required for topping up shall be measured and paid for separately under relevant item of this Schedule. (v) Testing of dielectric strength of dehydrated transformer oil of each transformer shall be carried out in the presence of Engineer-in-Charge and cost there of shall be borne by the contractor. |
| 2 | Supply and filling in replacement new mineral grade transformer oil EHV type conforming to IS-335 of 1993 test requirement for corrosive sulpher of BDV not less than 60 KVA for topping up of reduced level of distribution/ power transformer due to evaporation / leakage / losses due to dehydration in transformer oil duly filtered with filtration plant to obtain high dielectric strength not less than 60 KV (gap 4mm) complete all as specified and as directed. Note : Transformer oil shall be supplied in sealed barrels with test certificate. Cost of barrel shall be deemed to be included in the unit rate quoted by the contractor and empty barrel will be the property of the Department and same shall be deposited to the AGE E/M Store Yard. Nothing extra shall be paid on this account. |
| 3 | Inspecting, servicing, testing and calibration of 33 KV SF 6 / VCB Breaker with control relay Panel as recommended by OEM by deploying expert inspector cum engineer and helper of authorised associates of M/s Crompton Greaves Company for followings :-(a) Properly clean the VCB with a CRC-226 & ensure proper lubrication in VCB (Electrical contact cleaner).(b) Removal of old grease & regreasing the same eith recommened frease.(c) Check condition of SIC contacts, alignment jaw contacts, proper tightening of hardware, proper closing of all poles together.(d) Check & adjust gap between hyleum sheet and side plate.(e) Check pressure of all circlips.(f) (i) Check IR between Phase-Phase (VCB closed condition) (ii) Phase-Earth (VCB closed condition) (iii) Phase-Earth (VCB in open condition)(g) Any faulty spares / parts to be replaced with new one. |
| 4 | Inspecting, servicing, testing and calibration of 33 KV SF 6 / VCB Breaker with control relay Panel as recommended by OEM by deploying expert inspector cum engineer and helper of authorised associates of M/s Crompton Greaves Company for followings :-(a) Properly clean the VCB with a CRC-226 & ensure proper lubrication in VCB (Electrical contact cleaner).(b) Removal of old grease & regreasing the same eith recommened frease.(c) Check condition of SIC contacts, alignment jaw contacts, proper tightening of hardware, proper closing of all poles together.(d) Check & adjust gap between hyleum sheet and side plate.(e) Check pressure of all circlips.(f) (i) Check IR between Phase-Phase (VCB closed condition) (ii) Phase-Earth (VCB closed condition) (iii) Phase-Earth (VCB in open condition)(g) Any faulty spares / parts to be replaced with new one. |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender