Tender For Special Repairs Of Officers Accommodation (Bldg No.P/145) At installation Baaz Under Ge C Bell Bay
Tender Value
27 Lakhs
Estimated cost
Bid Submission
02 Oct 2026
16 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs Of Officers Accommodation (Bldg No.P/145) At installation Baaz Under Ge C Bell Bay
BOQ
| Sl. No. | Item Description |
| 1 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick laying floor finished in cement mortar 1:6 including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces,set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick over screed bed or bedding layer of motar for laying floor finished in cement mortar 1:6 including dismantling existing floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | M&L for rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment including 15 mm thick Screed bed or bedding layer of cement mortar 1:4, for laying floor finishes complete all as specified and directed. |
| 6 | S&F for aluminium anodised snap grid frame (with minimum 15 micron uniform anodic coating) size of 600 X 600 mm consisting of Tee/ Angle section of size 40x40x2 mm thick as approved make confirming to IS-733 in frames of false ceiling including aluminium cleats with necessary CP brass / stainless steel shunk screws, aluminium perimeter angles fixed to wall wooden frame at centre to centre and fixing frame to level adjusting anchors 6mm dia GI wire hook in Tee members at 1.5 m centre to centre fixed to steel truss of roof including dismantling of Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including hangers & cover fillets/frame work etc complete all as specified and directed. |
| 7 | M&L for fixing in position 4 mm thick Non asbestos designer ceiling board of size 595 X 595 mm as per manufacturer's specification complete all as specified and directed. |
| 8 | Taking down chowkat or frames with shutters exc 1.50 sqm and n.exc 4 sqm each and removing from site complete all as specified and directed. |
| 9 | S&F for Solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening complete all as specified and directed. |
| 10 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuckinside solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail; paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stieles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed. |
| 11 | S&F for butt hinges medium weight cold rolled mild steel 100mm complete all as specified and directed. |
| 12 | S&F for 150mm long anodised extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 13 | S&F \\"as in repair\\" 75mm dia of outer cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed. |
| 14 | S&F \\"as in repair\\" 75mm dia of outer cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and directed. |
| 15 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling existing plain corrugated steel sheeting any gauage thickness including Nainital and similar pattern complete all as specified and directed.complete all as specified and directed. |
| 16 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 17 | S&F \\"as in repair\\" swan neck pillar tap of including removing the existing unserviceable pillar tap etc complete all as specified and directed. |
| 18 | S&F \\"as in repair\\" Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets etc complete all as specified and directed by Engr-in-charge. |
| 19 | S&F \\"as in repair\\" Vitreous China wash down water closet pan (pedestal pattern), white complete all as specified and directed by Engr-in-charge. |
| 20 | S&F \\"as in repair\\" PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets etc complete all as specified and directed. |
| 21 | S&F \\"as in repair\\" PTMT waste coupling of 40 mm dia ( half or full threaded ) Minimum weight for 40 mm –60 gms including taking down old coupling of any description complete all as specified and directed. |
| 22 | M&L for CPVC pipes 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 23 | M&L for CPVC pipes 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 24 | S&F \\"as in repair\\" 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. |
| 25 | S&F \\"as in repair\\" 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. |
| 26 | S&F \\"as in repair\\" PVC (SWR) bends any radius 75 mm dia of bore, including taking down old bends complete all as specified and directed. |
| 27 | S&F \\"as in repair\\" PVC (SWR) bends any radius 110 mm dia of bore, including taking down old bends complete all as specified and directed. |
| 28 | M&L for pre-cast cement concrete block masonary 1:3:6 type C-1 (Using 20 mm graded crushed stone aggregate) with solid block exc 10 cm in width and setting in CM 1:6 etc including demolition of existing concrete block walling, RR masonary in cement mortar including all quoins archas pillars etc and pre-cast block walling etc complete all as specified and directed. |
| 29 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) etc including taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land complete all as specified and directed. |
| 30 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finish the surface even and smooth including and mixing of WPC as per manufacturing instruction including taking down existing cement plaster of any description including racking out joints, hacking for key and disposing of debris to a distance exc 1 Km out side MD land complete all as specified and directed. |
| 31 | Dismantling of aluminium partition / windows of any size and of any description complete all as specified and directed. |
| 32 | S&F powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and directed. |
| 33 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as per architectural drawings complete all as specified and directed. |
| 34 | M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work in cup board shutters / aluminium partions etc..complete all as specified and directed. |
| 35 | S&F for 5 mm thick figured glass, pin head type and glazing with oil putty / aluminium beading in square exc 0.50 Sqm each in each pane complete all as specified and directed. |
| 36 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples etc complete all as specified and directed. |
| 37 | Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) and removing debris to outside MD land complete all as specified and directed. |
| 38 | M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggregates) of 25 mm thick as in leveling course ,finished surfaces even and rough to receive floor finish complete all as specified and directed. |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 40 | S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161:1979 grade St.-240 etc complete all as specified and directed. |
| 41 | M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 42 | M&L for preparation of old painted steel or iron surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 43 | S&F \\"as in repair\\" 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer etccomplete all as specified and directed. |
| 44 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfacescomplete all as specified and directed. |
| 45 | M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over alkali resistant primer with 1 mm thick wall care putty complete all as specified and directed. |
| 46 | M&L for preparation of new plastered surfaces of ceilings (for false ceiling) and applying two coats of oil bound distemper over alkali resistant primer complete all as specified and directed. |
| 47 | S&F \\"as in repair\\", plug type 20 mm dia bib taps, cast iron, screwed for iron pipe and fixed complete all as specified and directed. |
| 48 | S&F \\"as in repair\\" PVC Connections 15mm dia size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 49 | Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 50 | M&L for 75mm thick plain cement concrete type C-2(using 20 mm graded crushed aggregate) 1:3:6 as in plinth protection/pavings including making joints and filling with sealing compound complete all as specified and directed. |
| 51 | S&F \\"as in repair\\" for door closer hydraulically regulated aluminum (Extruded typet) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg, fixed as in repairs, complete all as specified and directed. |
| 52 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed . |
| 53 | Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and directed. |
| 54 | M&L for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and directed. |
| 55 | One Light/Fan point controlled by one switch |
| 56 | One switch socket outlet modular type 3 pin 6 amp on same board. |
| 57 | One switch socket outlet modular type 3 pin 6 amp on independent board. |
| 58 | Description all as per item No 54 above but 2.5 sq mm cable size and 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 amps on Independent board. complete all as specified and directed. |
| 59 | Description all as per item No 54 above but 4.0 sq mm cable size and 4.0 sq mm earth continuity wire for one AC point on metal clad box. complete all as specified and directed. |
| 60 | S&F Switch modular type, single pole one way 6 Amps, 240 volts AC suitable for existing modular switch boxes without indicator, complete all as specified and directed. |
| 61 | S&F socket modular type single pole one way 6 Amps 240 volts AC suitable for existing modular switch boxes complete all as specified and directed. |
| 62 | S&F socket modular type 16 Amps, 3 pin combine multistandard, 2 module, 240 volts suitable for existing modular switch boxes complete all as specified and directed. |
| 63 | S&F switch modular type 16 Amps,one way with indicator, 1 module, 240 volts suitable for existing modular switch boxes complete all as specified and directed. |
| 64 | S&F \\"as in repair\\" 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 120 Watts humfree single pole, complete all as specified and directed. |
| 65 | S&F \\"as in repair\\" ceiling rose, surface bakelite, 65 x 50 mm, three terminals, ISI marked complete all as specified and directed. |
| 66 | S&F \\"as in repair\\" Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 amps complete all as specified and directed. |
| 67 | S&F \\"as in repair\\" wall mounted LED 18/20 watts 6500 K with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with integral LED tube 4' x 18 watts complete all as specified and directed. |
| 68 | S&F \\"as in repair\\" Surface mounting 10 Watt LED Luminaries with epoxy white powder coated CRCA sheet steel housing with reeded translucent acrylic diffuser and 1 x 10 Watt LED fitting complete all as specified and directed. |
| 69 | S&F \\"as in repair\\" LED building security lights 25 W IP 66 including 1.5mtr long GI bend pipe of suitable dia and all necessary accessories complete all as specified and directed. |
| 70 | S&F \\"as in repair\\" of Energy efficient 5 Star Rating, BLDC motor, dust proof, Ceiling Fan 1200 mm Sweep size, copper winding with minimum air delivery of 210 cu.mtr/min, A.C, single phase, 220 volt 50 Hz including canopy reel, flexible copper conductor fixing with necessary lugs drawn through flexible PVC conduit from ceiling rose,including necessary hook, rubber bush & safety pin all necessary accessories including removal of old ceiling fan and deposit to MES sub division storeyard complete all as specified and directed. |
| 71 | S&F \\"as in repair\\" exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades, frame and louver including making of holes if require for exhaust fan alongwith removal of old exhaust fan and deposit to MES E/M sub division storeyard complete all as specified and directed. |
| 72 | S&F \\"as in repair\\" sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 including taking down of existing DBs complete all as specified and directed. |
| 73 | S&F \\"as in repair\\" MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and directed. |
| 74 | S&F \\"as in repair\\" MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and directed. |
| 75 | M&L for Earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 3 of SSR PART 1 of 2009 to the earthing test point incl testing on completion including taking down complete all as specified and directed.Note :- The cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wiremesh, charcoal dust and common salt earth lead protection pipe upto 7.5 Rmt shall be deemed included in the unit rate quoted for earthing complete all as specified and directed. |
| 76 | S&F \\"as in repair\\" single phase electronic meter, temper proof, LCD display with polycarbonate cover, 230 V, 10-60Amp, accuracy class-I, 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender