Tender For special Repair To Certain Buildings, Provn Of Security Wall And Elevated Post At Tangdhar Under The Aor Of Ge 874 Ews.
Tender Value
49.56 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
11 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Certain Buildings, Provn Of Security Wall And Elevated Post At Tangdhar Under The Aor Of Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed. |
| 2 | Add to item No 1 for each additional 1.5m or part thereof in depth beyond the first 1.5m. |
| 3 | M & L for PCC (1:4:8) type D-2 using40mm graded stone aggregate in foundation/filling and mass concrete complete all as specified and directed. |
| 4 | M&L for RCC M-30 Design Mix (20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 5 | M&L for RCC M-30 Design Mix (20mm graded aggregate) as in columns, piers, posts and struts complete all as specified and directed. |
| 6 | M&L for RCC M-30 as in Beams, cantilevers, bressummers lintel over 1.5 m span complete all as specified and directed. |
| 7 | M&L for RCC M-30 Design Mix (20mm graded aggregate) as in slabs supported on walls, beams, columns in floor, roof, landings and the like complete all as specified and directed. |
| 8 | M&L for form work to sides of concrete foundation ,footings, bases of columns, raft foundation ,sides and soffits of foundation and plinth beam and similar work ,vertical or to batter, complete all as specified and directed. |
| 9 | M&L for form work to square, rectangular or polygonal fair finished surfaces of , pillars ,piers, post, and struts column complete all as specified and directed. |
| 10 | M&L for form work to flat fair finished surfaces to sides and soffits of floor or roof beam, beam haunching, girders, bressummers lintel, cantilever ,shelves including supports, over head, etc also splays between floors and beams, complete all as specified and directed. |
| 11 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work , not exceeding 20cm thick (Horizontal or sloping) complete all as specified and directed. |
| 12 | M & L for mild steel TMT bars 10mm dia & over cut to length bent to shape as required, including cranking bending spirally for hoping for columns hooking ends & binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | M & L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape as required, including cranking bending spirally for hoping for columns hooking ends & binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 14 | M&L for brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L for rendering 10mm thick on fair faces of brick work or surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | Rendering 15mm thick on fair faces of brick work or surfaces in cement mortar 1:4 on external surfaces of wall etc finished even and smooth without using extra cement and mixed with integral water proofing compound @ 3% complete all as specified. |
| 17 | Supply only integral water proofing compound complete all as specified and directed. |
| 18 | M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 complete all as specified and directed. |
| 19 | M&L preparation of new plaster surfaces and applying two coat of distemper oil emulsion white tinted complete all as specified and directed. |
| 20 | M&L preparation of new plaster surfaces or un plastered surfaces and applying two coat of cement base paint complete all as specified and directed. |
| 21 | M&L for mild steel Fe -410-W(gde-E-250) Quality A as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 22 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws complete all as specified and directed. |
| 23 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in ridge etc, fixed with tapping screws complete all as specified and directed. |
| 24 | S&F 6mm thick Non asbestos fibre cement building boards fixed or laid/inserted to aluminium frame work with screws of minimum size 605x605mm as in ceiling complete all as specified and directed. |
| 25 | S&F GI frame work of size 605mm x 605mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel fasteners with and including ceiling section(not exc 1.2m length) of 0.5mm thickness having kurled web of 50mm and flange of 25mm each with lips of 10.5mm fixed to the intermediate channel with connecting with connecting clips across the intermediate channel at 457mm centre to centre Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and extension hold fastener 12.5mm dia 40mm long complete all as specified and as directed. |
| 26 | M&L preparation of new plaster surfaces and Non asbestos fibre cement building boards of ceiling and applying three coats of white wash complete all as specified and directed. |
| 27 | M&L hardcore (broken stone or boulders) of gauge exc 63mm but n exc 100 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled / rammed to a true surface all as specified and directed |
| 28 | M&L PCC 75mm thick type D2, 1:4:8(using 40mm graded aggregate) as in floor surface and finishing even and smooth complete all as specified and directed. |
| 29 | M&L PCC 40mm thick type B1, 1:2:4(using 20mm graded aggregate) as in floor surface and finishing even and smooth complete all as specified and directed. |
| 30 | M&L PCC 75mm thick type C2, 1:3:6(using 20mm graded aggregate) as in plinth protection, path etc and finishing even and smooth complete all as specified and directed. |
| 31 | S&F mild steel work as in Stairs (framed) including stringers, tread, landing, balusters, hand rails etc including cleats brackets etc complete of Fe -410-W(gde-E-250) Quality A complete all as specified and directed. |
| 32 | M&L for preparation of steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 33 | M&L for preparation of steel and iron surfaces not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 34 | S&F for 2nd class hard wood, plain, solid, straight chowkats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with flue pinned at joints complete all as specified and directed. |
| 35 | S&F 35mm thick 2nd class HW plain, framed, factory made panelled shutter (any number of panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. etc complete all as specified and directed. |
| 36 | S&F mild steel works band, straps, holdfasts and similar small articles conforming to Fe290 Gde165 complete all as specified and directed. |
| 37 | S&F aluminium anodise barrel tower bolt of extruded sec of 150mm length complete all as specified and directed. |
| 38 | S&F aluminium handle of 150mm length complete all as specified and complete all as specified and directed. |
| 39 | S&F for 100mm long stainless steel butt hinges medium weight cold rolled complete all as specified and directed. |
| 40 | S&F 300mm long Aluminium alloy, anodised sliding door bolt with complete fittings etc complete all as specified |
| 41 | M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink wooden primer over 10cm width or girth complete all as specified and directed. |
| 42 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed. |
| 43 | Removing excavated material to be a distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point, complete all as specified and directed. |
| 44 | S&F mild steel framed work such as grills, gratings, etc..with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 45 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as specified and directed. |
| 46 | M& L for 100mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed. |
| 47 | M&L Chequered cement concrete tiles 20cm X 20cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 48 | M & L 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, finished even and fair complete all as specified. |
| 49 | M&L PCC 1:2:4 type B-1 in kerb or mud stops rounded or chamfered on edges all as specified (20mm graded aggregate) for copping, including weathering slightly rounded or chamfered using form work (Straight or curved) complete all as specified and directed. |
| 50 | M&L 10mm thick rendering on fair face of brick or concrete surface in cm (1:4) complete all as specified and directed. |
| 51 | S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete. GDE-E-250 complete all as specified and directed. |
| 52 | M&L excavating in all kind of soil earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed. |
| 53 | All as per item No 934 above but excavation each additional 1.5 m or part thereof in depth beyond the first 1.5 m. |
| 54 | S&F Galvanised 2 stand steel barbed wire 2.24 dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staple or steel pins complete all as specified and directed. |
| 55 | S&F Punched tape concertina coil (including spike and handle) with 56 loops and dia 600mm, max covered length 8.0RM, and weight not less than 8.0 Kg (approx.) each coil, spreading length not more than 8.0RM in position complete all as specified and directed. |
| 56 | S& F Hallow PVC wall and ceiling lining consisting of 5 to 6 mm thick plain colour PVC sheet with fillets of width 20mm like L and U inclusive to make PVC frame for walls and ceilings including dismantling of old unserviceable panelling, boardings of any description complete all as specified and directed. |
| 57 | M&L weather boarding of second class soft wood, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm lap in repair to replace old or decayed boarding and removing from site complete all as specified and directed. |
| 58 | M&L for plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 13 sqcm & n exc 25 sqcm, second class soft wood (Kail) clean sawn complete all as specified and directed. |
| 59 | Description all as per item 6 above but except bricks. |
| 60 | M&L for Rendering 15mm thick on stone/brick masonry surfaces or other than fair faces in cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 61 | M&L for preparation of old/new plastered surfaces and applying two coats of Oil bound distemper over a coat of primer applied over 3mm thick super fine wall care putty finish including preparing the surfaces even and smooth complete all as specified and directed. |
| 62 | M &L for second class soft wood as in scantling clean sawn fixed in position including dismantling of timber scantlings 40 sq cm and over in sec, in any position, in unframed/framed work complete all as specified and directed. |
| 63 | Description all as per item 6 above but except wood. |
| 64 | Demolition of cement concrete (Un-reinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level complete all as specified and directed. |
| 65 | M&L for 25mm thick cement concrete type B-1, 1:2:4 as in sub base under floor and finished rough surface complete all as specified and directed. |
| 66 | M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 67 | Taking down chowkhats or frame exc. 1.5sqm and n. exc. 4 sqm each with shutter (without taking out shutters from the frame) complete all as specified and directed. |
| 68 | Taking down chowkhats or frame n. exc. 1.5sqm each with Shutter(without taking out shutters from the frame) complete all as specified and directed. |
| 69 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 70 | Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds etc, glazed with putty or fixed with beads complete all as specified and directed |
| 71 | S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed. |
| 72 | M&L for IInd class hard wood Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut M&L for and mitred beads for securing glass etc supplied and fixed to chowkhat, 30mm thick shutter for window and ventilator as specified in SSR Part-I,Section-8,clause 8.24 (b) complete all as specified and directed. |
| 73 | S&F 200mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 74 | S&F 200 mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and directed. |
| 75 | M&L for Aluminium handles cast type anodised 100mm long complete all as specified and directed. |
| 76 | S&F 100mm long aluminium alloy, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 77 | M&L for galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, fixed in repairs, complete all as specified and directed. |
| 78 | S&F vitreous china wash basin, white, flat back, size 550x400mm including waste chain & plug and porcelain stopper and including brackets, waste pipe, etc complete all as specified. |
| 79 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 80 | S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. |
| 81 | S&F Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked). |
| 82 | Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 83 | S&F pillar tap 15mm bore cast copper alloy, with capstan head chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 84 | Supply and fixing in repairs PVC (SWR) 110mm bore as soil waste and vent pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 85 | All as per srl item No 84 above but 75mm bore. |
| 86 | Supply and fixing PVC (SWR) bends, T any radius for 110mm pipe complete all as specified and as directed. |
| 87 | All as per item No.86 above but for 75mm bore pipe. |
| 88 | Taking up or down steel tubing and connections, complete all as specified and directed. |
| 89 | S&F GI steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm complete all as specified and directed. |
| 90 | Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering/wall, complete all as specified. |
| 91 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, |
| 92 | S&F for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 93 | M&L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5sqmm 1100 volts grade cable for phase and neutral, FRLSH drawn through PVC casing caping including accessories and provision of flused mounted PVC boxes for mounting switches, switch socket, fan regulator and junction boxes as required on site or as directed by Engineer-in- charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly, cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified. |
| 94 | All as per item No 93 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board. |
| 95 | All as per item No 93 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board. |
| 96 | All as per item No 93 herein before but wiring with 4 sqmm copper wire (FR-LS-H) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board. |
| 97 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 98 | S& F of Socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed. |
| 99 | S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed. |
| 100 | S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed. |
| 101 | Supply and fix ceiling rose with earth terminal 2/3 connection, PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 102 | S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection/ PVC/ polycarbonate, isolated body. complete all as specified and directed. |
| 103 | M & L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. |
| 104 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 105 | S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 106 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300msweep with, blades, and frame and louvers complete all as specified and directed. |
| 107 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 108 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender