Tender For Comprehensive Maintenance In Trauma Center, Dialysis Center, Ot, Icu, Nalanda Hall, Cardio Opd And Certain Bldgs In Aor Of Age B/R Bhdc Under Ge (East) Delhi Cantt-10
Tender Value
45 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
8 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance In Trauma Center, Dialysis Center, Ot, Icu, Nalanda Hall, Cardio Opd And Certain Bldgs In Aor Of Age B/R Bhdc Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work etc complete all as specified and as directed. |
| 2 | Supply and fixing PVC fluted wall panels of approved make, design and shade, manufactured from rigid Polyvinyl Chloride (PVC), extruded with vertical /ribbed /fluted profile, having panel width 128 mm x thickness 18 mm with 2 mm groove at 14 mm pitch, and length as required at site, fixed over prepared surface using approved adhesive, screws or concealed clip fixing system as per manufacturer’s specifications. Panels shall be moisture resistant, termite proof. All joints, corners and terminations shall be neatly finished with matching PVC trims, corner profiles, end caps and accessories. The item includes surface preparation, cutting, edge finishing, scaffolding, cleaning after installation and all incidental works, complete in all respects as per drawing and direction of the Engineer-in-Charge. |
| 3 | M&L false ceiling using powder coated grid system of GI modular grid size 600 x 600 mm with runner 38x24x07mm cross tee 25x24x0.7mm and wall angle 24x24x7-8 mm thick PVC laminated Gypsum tiles of size 600 x 600 mm of different designs with rear side MPL film fitted in the grid, grid system hanges by 6 mm dia GI wire to purlin, trusses; RCC slab of the roof etc. with hold down clips, butterfly clips, height fixtures etc, complete all as specified and directed. |
| 4 | S&F GRG (Glass fibre reinforced Gypsum) semi perforated 12 mm thick tiles of size 595 x 595 mm white colour of approved texture,design (Tegular) and patterns having moisture content less than 2%, humidity ressitance of 99% NRC 0.60 to 0.85 as per IS 8225:1987, Non combustible as per BS 476 Sub Head : 26.0 New Technologies and materials reflectance of 85% (Min) to be laid in true horizontal level suspended on interlocking metal 'T' grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120grams per sqm including both sides) comprising of main 'T' runners of size 15 x 32 mm of length 3000mm,cross Tof size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm ) i e 50mm long, 8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x2 mm. Galvanised iron perimeter wall angle of size 24 x 24 x0.40mm thick of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and as directed. (Make- Dimond/ Armstrong/ Gyproc or Shera) Note: Contractor has to submit the drawing to the Engr-in-Charge and get the same approved before execution of GRG work. |
| 5 | S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 6 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 7 | S&F 4 mm thick ECO building board fixed or laid/inserted to GI/ Aluminium framework with screws complete all as specified and directed. |
| 8 | S & F in repairs of 4mm th ACP( Al composite panel) cladding of approved quality and colours as approved by GE, Fixing in MS frame at any ht and incl MS frame of size n.exc 0.36 Sqm ( used in rectangular tubes of size 50.8mmx25.4mmx2.9mm th or square tubes 38mmx 38mm x2.9mm th are used in frame) and filling the joints with all weather silicon sealant incl all mouldings,cutting,etc complete all as specified and directed. |
| 9 | Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. of any description complete all as specified and as directed. |
| 10 | M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of walls, finished the surface fair and even without using extra cement complete all as specified and as directed. |
| 11 | M & L 15 mm thick rendering in cement mortar (1:4), on brick or concrete wall surface, mixed with water proofing compound @ 3% by weight of cement, finished fair & even without using extra cement complete all as specified and as directed. |
| 12 | M & L 5 mm thick rendering in cement mortar (1:3) on ceiling surface, finished even & smooth without using extra cement complete all as specified and as directed. |
| 13 | M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings includind forming groove of uniform size 15mm wide and 15mm deep as per approved pattern complete all as specified and as directed. |
| 14 | M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including a coat of alkali resistant primer and 3 mm thick cement based wall care putty complete all as specified and as directed. |
| 15 | M&L preparation of new plastered wall surfaces and applying two coats of weather proof Exterior emulsion paint of colour & shade as approved (Colour scheme shall be as approved by the GE & user) over and including a coat of priming paint and 3 mm thick cement based wall care putty complete all as specified and as directed. |
| 16 | M&L preparation of new plastered ceiling and applying three coats of white wash complete all as specified and as directed. |
| 17 | M & L for Preparation of old decorated wall surface by scrapping by electrically operated grinder machine/ electric regmal machine and applying one coat of wall care putty on patches work then scrubbing by sand paper to prepare a even surface and applying one coat of OBD of any colour washing down with water complete all as directed. (Make: Asian Paints/ Berger) Please Enable Macros to View BoQ information |
| 18 | M & L for Preparation of old decorated wall surface by scrapping by electrically operated grinder machine/ electric regmal machine and applying one coat of wall care putty on patches work then scrubbing by sand paper to prepare a even surface and applying one coat of OBD of any colour washing down with water complete all as directed. (Make: Asian Paints/ Berger) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender