Tender For Construction Of Dog Kennels In Dog Hospitals, Repairing Of Dog Hospitals And Laying Of Paver Block Nearby Under Ward 46
Tender Value
10.30 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
10 days left
EMD
20608
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Dog Kennels In Dog Hospitals, Repairing Of Dog Hospitals And Laying Of Paver Block Nearby Under Ward 46
BOQ
| Sl. No. | Item Description |
| 1 | Labour for cleaning the work site before and after work etc. |
| 2 | Labour for clearning the work site before and after work etc. |
| 3 | Dismantling plain cement or lime concrete work including stacking serviceable materials -do- |
| 4 | Dismantling r. c. c. work including stacking serviceable materials -do- |
| 5 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 ( 9\\"*4.5\\" *3\\") C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 6 | Providing 12mm Thick cement plaster(1:4)-do- |
| 7 | providing two coats of plastic emulsion paints of approved shade and make over a coat of cement primer over new surfaces including prepared plastered surface by rubbing smoth with pumice stone or fine sand paper, applying putty wherever required scaffolding -do- |
| 8 | Supplying, fitting and fixing 20 gauge G.C.I. sheet gate filled on M.S. angle frame do ---do--- all complete as per building specification and direction of El. |
| 9 | Supplying, fitting and fixing M.S. grill made of 20x6 mm M.S. flat or 16mm M.S. square bar fitted on 25x25x6mm M.S. angle frame--do--- all complete as per building specification and direction of El. |
| 10 | Providing stone cruster dust finer than 3mmwith not more than 10% passing 0.075 sieve at quarry in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of materials , labour , royalty and taxes all complete as per specification and direction of E/I. ( Mode of measurement compacted volume. ) |
| 11 | Providing and laying 80mm thick factory made concrete interlocking pavour block of M-40 grade made by block making machine with strong vibratory compaction of approved size, design and shaped, laid in required colour and pattern over bed as per relevant IRC code filling the joints with fine sand etc all complete as per the direction of E/I |
| 12 | Supplying and laying (properly as per design and drawing) rip-rap with good quality of Boulders duly packed including the cost of materials, royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I. |
| 13 | Reinforced cement concrete work in walls (any Thickness), including attached pilasters, buttresses, abutments, posts and structs etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size) |
| 14 | Reinforced cement concrete work in beams, suspended floors, foors having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staicases and spiral stair cases above plinth level up to floor five lvevel, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20mm nominal size). |
| 15 | Providing Tor steel reinforcement of 8mm & 10mm dia bars as per approved design and drawing excluding carriage of Rods (straight or in coils) to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 16 | Providing Tor steel reinforcement of 8mm & 10mm dia bars as per approved design and drawing excluding carriage of Rods (straight or in coils) to work site, cutting, bending, and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 17 | providing and laying 6mm white glazed tiles in walls --do-- |
| 18 | water proofing for old and new slab , providing and laying water treatment on roof slab by two component --do--- |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:1.5:3 (1 Cement : 1.5 coarse sand zone(III): 3 graded stone aggregate 20mm nominal size) |
| 20 | Supplying and drawing 2X 1.5 sq.mm sizes FR PVC insulated,single core cable in the existing /recessed steel/PVC conduit as required |
| 21 | Supplying and drawing 2X 4sq.mm sizes FR PVC insulated,single core cable in the existing /recessed steel/PVC conduit as required JSR 1.16 |
| 22 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, \\"C\\" curve,miniature circuit breaker suitable for.inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required6/32 amps, Single Pole |
| 23 | S/F S.P. MCB DB :-Supplying and fixing following way, single pole and neutral, sheet steel,MCB distribution board, 240 volts, on surface/ recess, compiete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way, Double door |
| 24 | S/F DP MCB isolator:-Supplying and fixing following rating double pole,240 volts, isolator in theexisting MCB DB complete with connections, testing and commissioning etc. as required.80/100 amps |
| 25 | S/F Piaoo type switch/ socket :-lSupptyrng and fxing of following piano type switch / socket on the existinglswitch box / cover including connections etc. as requted.15/16 amps,6 pin S.S. combined |
| 26 | S/F Modular boxes, base & cover plate :- Supplying and fixing following size / modules , GI box along with modularbase & cover plate for modular switches in recess etc as required.8/9 module (78mm x 230mm x 60mm) |
| 27 | S/F Modular type switch/ socket :-Supplying and fixing of following modular switch / soket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps, one way switch |
| 28 | S/F Modular type switch/ socket :-Supplying and fixing of following modular switch / soket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps, one way switch.5/6 amps, 3 pin socket outlet |
| 29 | Supplying and fixing of 20 mm sizes of PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required |
| 30 | S.I.T.C of 20W LED Tubelight rating surface mounted LED tube light fitting suitable for 230V 50Hz, single phase supply etc. complete as required. JSR 9.5 |
| 31 | S/F ceiling rose :-supplying and fxing 2 pn 5 amp. Ceiling rose on the existing junction box wooen block including connection etc. as required . |
| 32 | Supply Installation, testing and commissioning of follwing size ceiling fan 3 Blades confirming to13:374,.2019 including wiring the down rods of standard length (upto 30cm) with 1.5sq.mm. FR PVC insulated, copper wire suitable for 230V 50Hz, single phase supply etc. complete as required.1400mm (56\\") Ceiling Fan |
| 33 | (i) Sand (Lead Upto 42 km) |
| 34 | (iv) Stone Chips (Lead 15KM) |
| 35 | Good & Service Tax (GST) |
| 36 | Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender