Tender For A/R&M/O Lwss Kathwari In Gp Bari Gumanoo In Tehsil Sadar Distt.Mandi (Hp)(Sh Repair & Maintenance Of Rising Main By Cutting Welding And Testing Of Old Gi Pipe 80 Mm Dia At Various Rds 1St & 2Nd Stage Unde Jal Shakti Section Dhanyari ).
Tender Value
1.95 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
7 days left
EMD
4000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for A/R&M/O Lwss Kathwari In Gp Bari Gumanoo In Tehsil Sadar Distt.Mandi (Hp)(Sh Repair & Maintenance Of Rising Main By Cutting Welding And Testing Of Old Gi Pipe 80 Mm Dia At Various Rds 1St & 2Nd Stage Unde Jal Shakti Section Dhanyari ).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. |
| 2 | Repair of gravity main by Cutting and Welding of GI Pipe diameter mentiond below i.e. by Butt Welding with gas welding two layers including cost of cutting of GI Pipe and carriage of welding set / DG Set by mechanical transport and head load up and down side of pipe line complete job in all respect and to the entire satisfaction of the Engineer-in-Charge in all leads and lifts.80 mm diameter |
| 3 | Manufacturing laying and jointing of GI bends of following dia (MC) of required degree conforming to relevant specifictions upto date ammendments having wall thickness mentioned below. The joint shall be jointes circumferencial butt welded joint wah croumferencial butt welded joints by electric arc welding in requisite what of weld rune so as to achive the ma the minimum effective thorat thickness and electrodes of 250 mm to 6.30 mm of Advani Gedikion (Ador) CITOUET / Faab length of weld conforming to 15816100 specification by using welding make conforming to 158141001. af site of work complete in all respects and to the entire satisfication of Engineerin Charge. 80mm dia Please Enable Macros to View BoQ information Terms and conditions |
| 4 | The work shall be executed as per HPPWD/JSV/ ISI specifications and to the entire satisfaction of the Engineer-in-charge. |
| 5 | The GI pipes shall be supplied by the department free of cost from JS Divisional store Raghu Nath Ka Padhar on proper indent. |
| 6 | The GI fittings shall be provided by the contractor at their own cost. |
| 7 | The contractor shall be fully responsble for watch and ward of the material at site of work. |
| 8 | Nothing shall be paid for rejected material/work. |
| 9 | 1% labour cess will be deducted from the bill of the contractor. |
| 10 | GST as applicable will be borne by the contractor. |
| 11 | The rates should be inclusive with GST and carriage |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender