Tender For Supply And Installation Of Audio System At Sadbhawana Sabhagruha Collectorate Building Jagatsinghpur For The Year 2025-26
Tender Value
7.12 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
7121
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jagatsinghapur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Installation Of Audio System At Sadbhawana Sabhagruha Collectorate Building Jagatsinghpur For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | SITC of pre-polarized condenser gooseneck microphone with overall length of 450mm or better have an integratedlight ring,with XLR5M-type connector with , shall offer radio frequency interference (RFI)shielding against intermodulation fromwireless equipment or devices,cardioidmicrophonecapsulewithuniform120°angleofacceptance(-3dB)orbetter, frequency response of 50Hz to 20,000Hz or better and sound input levels handling capability of minimum 130dBspl or better,nominal equivalent noise level of 26Dba or better and output shall be low impedance balanced (<100ohms)with current consumption shall be 3mA or better. table stand with Microphone modes Toggle on/off, Push to mute,Push to talk,permanent on for connecting and operating XLR gooseneck microphones with XLR-5F microphone input and an XLR-3Mmicrophone output operating on 48V phantom power and current consumption of 3.7mA or better. Make: Sennheiser, Clock Audio, Rode |
| 2 | SITC of Podium Microphone of gooseneck stem with overall length of 550-600mm with a pre-amp along with its XLR-3connector.For set-up as table mount or shock mount.Hyper cardoid capsule, 12 to 48V phantompower, frequency response of 40Hz to 20kHz or better, equivalent noise level maximum 23dB weighted A or better. Impedance 50 Ohm or better, Minimal terminating impedance 1k Ohm or better,Maximum sound pressure level 130 dB SPL or better with gold plated electrical contact points.Tablestand with Microphone modes Toggle on/off,Push to mute, Push to talk, permanent on for connecting and operating XLR goose neck microphones with XLR-3F microphone input and an XLR-3M microphone output operating on 48V phantom power and current consumption of 3.7 mA or better. Make: Sennheiser, Clock Audio, Rode |
| 3 | SITCof 32 Channel Mixer with 32 monochannels,2dual stereo inputs with 4-band EQ, 4-band EQ with 2 swept mids and in/out switch, 4 sub groups fed from each channel, 12 bar meters, Individual channel 48Vphantom power,Configurable USB stereoaudio in/out.Make: Yamaha, Allen & Health, Behringer |
| 4 | Supply and installation of 10 m extension cable for Conference/Discussion System, suitable for interconnection of Chairman/Delegate Units with the Control Unit or system bus, shielded multi-core cable with compatible factory-terminated system connectors, low-loss and noise-resistant construction, complete with all required connectors, couplers and accessories. Make: BOSCH / Sennheiser or equivalent |
| 5 | Supply and installation of 2 m extension cable for Bosch LBB Conference/Discussion System, suitable for interconnection of Chairman/Delegate Units with the Control Unit or system bus, shielded multi-core cable with compatible factory-terminated system connectors, low-loss and noise-resistant construction, complete with all required connectors, couplers and accessories. Make: BOSCH / Sennheiser or equivalent |
| 6 | Microphone cable Make: Krystal/Liberty/Finolex |
| 7 | SITC of Snake Cable:Supply and Laying of 8 pair Analog Audio Snake Cable, 24.AWG stranded(7x32)TC conductor,Polyolefin insulation, individually shielded,number or color-coded PVC jackets and shields bonded to strip simultaneously over all shield and 24 AWG TC drain wire. Make: Krystals/ Kramer/ Belden |
| 8 | Stage Box |
| 9 | SITC of XLR MALE |
| 10 | SITC of XLR Female Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender