Tender For Day To Day Civil Maintenance Works Such As Plumbing, Carpentry Sanitary And Sewerage Works Etc. For Hostel,Admin Buildings & Staff Quarters In The Jurisdiction Of Rttc Jaipur ( For 3 Months ).
Tender Value
2.38 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
4 days left
EMD
4773
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Civil Maintenance Works Such As Plumbing, Carpentry Sanitary And Sewerage Works Etc. For Hostel,Admin Buildings & Staff Quarters In The Jurisdiction Of Rttc Jaipur ( For 3 Months ).
BOQ
| Sl. No. | Item Description |
| 1 | Providing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 2 | Twin rubber stopper |
| 3 | Providing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 4 | 250x16 mm |
| 5 | Providing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 6 | 250x10 mm |
| 7 | Providing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 8 | 125 mm |
| 9 | Providing Stainless Steel sliding door bolts of approved make with 16 mm rod and 5 mm Patta with nuts and screws etc as per manufacturer specification complete : |
| 10 | 250x16 mm |
| 11 | Providing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete. |
| 12 | Providing and fixing on wall face / for external work unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. |
| 13 | 75 mm diameter |
| 14 | 110 mm diameter |
| 15 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. (a)Bend 87.5° |
| 16 | Bend 87.5° |
| 17 | 75 mm bend |
| 18 | 110 mm bend |
| 19 | Shoe (Plain) |
| 20 | 110 mm Shoe |
| 21 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 22 | 75 mm |
| 23 | 110 mm |
| 24 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : |
| 25 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 26 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 27 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 28 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm). |
| 29 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 30 | White solid plastic seat with lid |
| 31 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, including all leads & lifts including all lifts involved(Nothing extra will be paid on account of leads and lifts).Measurement shall be done in trolley size (3.05x1.83x0.61) m size |
| 32 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 33 | 10 litre capacity - White |
| 34 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 35 | Flat back wash basin of size 550x400 mm |
| 36 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(a) Semi rigid pipe |
| 37 | 32 mm dia |
| 38 | ProvidingPTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60gms. |
| 39 | Providing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
| 40 | 20 mm nominal outer dia Pipes |
| 41 | 25 mm nominal outer dia Pipes |
| 42 | Providing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work |
| 43 | 20 mm nominal outer dia Pipes |
| 44 | 25 mm nominal outer dia Pipes |
| 45 | 40 mm nominal outer dia Pipes |
| 46 | 50 mm nominal outer dia Pipes |
| 47 | Providing G.I./CPVC Union in G.I./CPVC pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 48 | 15 mm nominal bore. |
| 49 | 20 mm nominal bore. |
| 50 | 25 mm nominal bore. |
| 51 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 52 | Providing PTMT bib cock of approved quality and colour. |
| 53 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 54 | Providing PTMT stop cock of approved quality and colour. |
| 55 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 56 | Providing PTMT pillar cock of approved quality and colour . |
| 57 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 58 | Providing PTMT grating of approved quality and colour. |
| 59 | Circular type. |
| 60 | 100 mm nominal dia. |
| 61 | Providing PTMT Ball cock of approved quality, colour and make ( Supreme,Astral &Ashirwad ) or equivalent make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 62 | 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. |
| 63 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 64 | 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms. |
| 65 | Providing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 66 | 15 mm nominal bore with 45 cm to 60 cm length. |
| 67 | Providing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 68 | 15 mm nominal bore. |
| 69 | Providing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 70 | 15 mm nominal bore. |
| 71 | Providing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 72 | 15 mm nominal bore |
| 73 | Providing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 74 | 15 mm nominal bore. |
| 75 | Providing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 76 | 15mm nominal bore |
| 77 | Providing PTMT, push cock of approved quality and colour. |
| 78 | 15 mm nominal bore, 98 mm long. Weighing not less than 75 gms. |
| 79 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 80 | Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. |
| 81 | Providing and placing 40 mm thick fine dressed stone for Manhole Cover /Water Tank cover. : |
| 82 | Red sand stone |
| 83 | Providing Plumber as and when required for attending day to day complaints of plumbing, sanitary installations, water supply fittings and related works complete excluding the cost of material except washers,nails,clamps,screws, M- seal, taplon tap , drill machine , bit etc. as per direction of Engineer-in-Charge. The material required for attending the complaints shall be arranged by the contractor at site and paid under sub head of 'supply of material' of the agreement. |
| 84 | Providing carpenter as and when required for attending all day to day complaints of carpentry works such as repair of doors , windows , cupboard shutters as per requriment on need basis for all jobs in one working day i/c cost of screws ,nails, fevicol clamps etc. (The material required for attending the complaints shall be arranged by the contractor at site and will be paid under sub head 'supply of material' of the agreement except cost of all T&P for attending the work shall be arranged by the contractor and nothing extra shall be paid. |
| 85 | Providing Beldar /Helper/sewerman as and when required for attending day to day maintenance job for carpentry,plumbing and Sewerman job and for other miscellaneous works such as cleaning the colonies compound, roof etc. including the cost of ledder, tagari, phawra etc.for all jobs in one working day. |
| 86 | Providing and replacement of unservicable floor trap for making leakproof including cutting and making good floors/walls etc. by replacing PVC/ china vitreous trap with cement mortar 1:3 with neat cement after taking out grating from floor including demolishing of C.C. work and stacking of useful materials near the site and disposal of unserviceable materials to municipal dumps. |
| 87 | Repairing of kota stone/stainless steel kitchen sink at joints,around waste coupling , bottom and sides with cement paste ,aralite etc.all complete as per direction of engineer in charge. |
| 88 | For making leakproof repair of traps/floors/walls etc.with cement mortar 1:3 (1 cement : 3 coarse sand mixed with ISI mark water proofing compound as proportion as specified by manufacture finished with neat cement after taking out grating from floor including demolishing of CC work and stacking of useful material near the site and disposal of unserviceable material into municipal dump. |
| 89 | Providing Brass Spindle for Pillar Taps/ C.P. Brass mixer.-15 mm nominal bore. |
| 90 | Providing and fixing C PVC Ball valve with knob or handle or Equivalent |
| 91 | 20mm dia. nominal bore. |
| 92 | 25mm dia. nominal bore. |
| 93 | Providing internal fitting kit i/c lever and handle etc for the PVC cistern of approved make as per direction of engineer-in-charge. |
| 94 | Repairing of Aluminium doors and windows size upto 3 sqm at site by dismembering the members and refixing members with cleats etc. as required for smooth functioning etc as directed by Engineer-in-charge. Any material required for repairing such as cleats and screws and pivots shall be arranged by agency. |
| 95 | Providing and fixing C.P. brass health faucet for europian type WC,approved make |
| 96 | Providing M.S. plug/ cap on existing open ended 15 mm /20 mm/25mm dia G.I.pipe line / fittings etc. all complete as per direction of engineer-in-charge. |
| 97 | Providing G.I.socket / Elbow of 15mm dia in existing G.I.pipe line for accessories fittings etc. all complete as per direction of engineer-in-charge. |
| 98 | Providing G.I. neeple of 15mm dia in existing G.I.pipe line of length 50mm/ 75mm/100mm etc. all complete as per direction of engineer-in-charge. |
| 99 | Providing G.I. neeple of 15mm dia in existing G.I.pipe line of length 150mm/ 200mm/225 mm etc. all complete as per direction of engineer-in-charge. |
| 100 | CREDIT of materials / items obtained from dismanteling being unserviceable.Brass bib cock / stop cock./ball cock |
| 101 | ( a ) 15 mm nominal size. |
| 102 | Brass spindle of Pillar cock-15 mm nominal bore. |
| 103 | Brass wheel or handle valve. |
| 104 | ( a ) 15 mm |
| 105 | ( b ) 20 mm |
| 106 | ( c ) 25 mm |
| 107 | G.I. pipe. |
| 108 | ( a ) 15 mm |
| 109 | (b) 20 mm |
| 110 | (c ) 25mm |
| 111 | (d ) 50mm |
| 112 | C.P. Brass Pillar/mixer tap 15 mm. |
| 113 | P.V.C./M.S.flushing Cistern up to 10.00 Litre capacity. |
| 114 | Unservicable/Broken SCI/CI Rain water,Sanitary pipes and fittings of different diameter |
| 115 | Credit of Unservicable PVC Water tank |
| 116 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 117 | 20 mm cement plaster |
| 118 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 119 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 120 | Deduct for not providing hinges in doors, windows or clerestory window shutters with : |
| 121 | ISI marked Stainless steel butt hinges with stainless steel screws : |
| 122 | For 2nd class teak wood and other class of wood shutters |
| 123 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender