Tender For Renovation Of Aee/ Sdo Type Kothi At Kotla Power House For Providing Chargeable Base Residential/ Support Accommodation To M/S Maclec In Connection With Surface Hydro Kinetic Turbine (Shkt) Project.
Tender Value
9.62 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
9 days left
EMD
19240
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rupnagar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Aee/ Sdo Type Kothi At Kotla Power House For Providing Chargeable Base Residential/ Support Accommodation To M/S Maclec In Connection With Surface Hydro Kinetic Turbine (Shkt) Project.
BOQ
| Sl. No. | Item Description |
| 1 | Removing, resizing and re-fixing of doors shutters.(As per AOR-I) |
| 2 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. |
| 3 | Doors of area 3 sqm and below(As per CSR-2020 item No. 8.26-a) |
| 4 | Windows of area 3 sqm and below(As per CSR-2020 item No.8.26-b) |
| 5 | Nicking cement concrete surface (Over 28 days old including preparation and laying slurry).(As per CSR-2020 item No.10.31) |
| 6 | Dismantling cement conglomerate floors 25mm to 50mm thick without concrete base(As per CSR-2020 item No.8.17) |
| 7 | Dismantling wooden chajjas and sun shades(As per CSR-2020 item No.8.37) |
| 8 | Scraping of cement plaster(As per CSR-2020 item No.8.31-C) |
| 9 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.(As per CSR-2020 item No.10.20) |
| 10 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc (@ 18.50 Sqm/Cum As per Item No. 9 Notes -iv-f)(As per CSR-2020 item No.9.8) |
| 11 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete.(As per CSR-2020 item No.18.18) |
| 12 | 12.5 mm thick cement plaster 1:5(As per CSR-2020 item No.15.10) |
| 13 | Plastering on underside of ceiling 10mm thick cement plaster 1:3.(As per CSR-2020 item No.15.43) |
| 14 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish.(As per CSR-2020 item No.16.65) |
| 15 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface.(As per CSR-2020 item No.16.11 & A&C Slip 1) |
| 16 | Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade(As per CSR-2020 item No.16.13) |
| 17 | Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks removing mud plaster preparing the surface of mud plaster to proper, slope relaying of mud plaster gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 Cement and 3 fine sand) including replacing the unserviceable tiles or bricks with new over and disposal of unserviceable material to the dumping ground with in 50 m lead (the Cost of new tiles or brick excluded).(As per CSR-2020 item No.31.11) |
| 18 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.(As per CSR-2020 item No.13.55) |
| 19 | Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16.(As per CSR-2020 item No.13.45) |
| 20 | Providing and fixing on wall face unplasticized Rigid PVC Rain water pipe single socket (Working pressure 4Kgf/cm2) conforming to IS: 4985, including fixing with MS clamps. (i) UPVC Rain water pipe (Working pressure 4Kgf/cm2) pipe 110 mm Dia.(As per CSR-2020 item No.13.74-a-I & AC Slip 1) |
| 21 | Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.(a) 110 mm bend.(As per CSR-2020 item No.13.75-i-a) |
| 22 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a)Size 600x600 mm.(As per CSR-2020 item No.14.113-a) |
| 23 | Providing and laying Anti-skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.(As per CSR-2020 item No.14.72) |
| 24 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi att/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(As per CSR-2020 item No.14.127) |
| 25 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete (c) Doors and windows frame of size 151mm x 60mm with 35 mm wide double rebateweighing 3.95 kg per meter.(As per CSR-2020 item No.18.24-c) |
| 26 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.(b) Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter.(Based on CSR 18.24-b) |
| 27 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.(a) panelled, glazed or glazed and panelled.(ii) 35mm thick.(As per CSR-2020 item No.17.10-xvii-a-ii) |
| 28 | Steel work fixed independently without connecting plates including cutting hoisting and fixing in position.(b) FLATS 25x5 mm.(As per CSR-2020 item No.18.1-b) |
| 29 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii)For shutter area above 0.50 sqm.(As per CSR-2020 item No.17.23-ii) |
| 30 | Welding by gas or by electric plant, including carriage to and from workshop etc.(As per CSR-2020 item No.18.28) |
| 31 | Aluminum catcher with Chain.(M.R.) |
| 32 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.(As per CSR-2020 item No.16.16) |
| 33 | Painting two or more coats with synthetic enamel paint sinall shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.(As per CSR-2020 item No.16.18) |
| 34 | Applying priming coat with metal primer on new steel or iron work including preparation of surface.(As per CSR-2020 item No.16.20) |
| 35 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect(b) Glazing area above 0.09 sqm(i) 3mm thick or 8.44 Kg/ sqm.(As per CSR-2020 item No.17.26-b-i) |
| 36 | Cement concrete 1:3:6(a) with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type.(As per CSR-2020 item No.10.12-a-ii) |
| 37 | Cement concrete 1:2:4 (a) with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type.(As per CSR-2020 item No.10.13-a-ii) |
| 38 | Providing and laying LDPE (Low Density Polyethylene sheets) over roofing before laying of roof tiles, having thickness of 200 micron including cutting, jointing ( heat seal jointing with hot iron ) and overlapping of minimum 150mm and CC gola 75 mm wide, complete in all respect to the satisfaction/approval of Engineer-in-charge.(As per AOR-II) |
| 39 | Dismantling sanitary Fixtures such as Europeon/Indian/ Orissa W.C PVC/China ware cistern, wash hand basin, Urinal Port, Sinks and CP fitting and Disposal of dismantled material with in distance of 100 mtr complete in all respect as required by Engineer-in-charge. |
| 40 | (a) Europeon/Indian/Orissa W.C(As per CSR-2020 item No.30.88-a) |
| 41 | (b) PVC/ china ware cistern(As per CSR-2020 item No.30.88-b) |
| 42 | (c) Wash hand basin/ urinal pot(As per CSR-2020 item No.30.88-c) |
| 43 | Providing and laying, jointing, fixing, and testing ISI Marked G.I Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hissar) including cost of specials (Such as tees, bends, socket elbow etc.) painting with anticorrosive bitumastic paint, testing, cutting, threading inside building complete.(a) 15mm i/d.(As per CSR-2020 item No.28.35-a & A/C Slip-4) |
| 44 | Providing and laying, jointing, fixing, and testing ISI Marked G.I Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hissar) including cost of specials (Such as tees, bends, socket elbow etc.) painting with anticorrosive bitumastic paint, testing, cutting, threading inside building complete.(b) 20 mm i/d.(As per CSR-2020 item No.28.35-b & A/C Slip-4) |
| 45 | Providing and fixing in position Chinware Europeon type water Closet with P trap or S trap of approved make (to the approval of Engineer-in-charge) with 10 Litr PVC flushing cistern PVC short bend 32mm dia including seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.(As per CSR-2020 item No.30.4) |
| 46 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. a. With C.P Brass nut.(As per CSR-2020 item No.30.8-a) |
| 47 | Providing and fixing in position Vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-incharge) including brass studs without CP fitting complete in all respect.(iii) Size 630 mm x 450 mm x 830 mm.(As per CSR-2020 item No.30.31-iii) |
| 48 | Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. (i) Vitreous chinaware standard white pedestal for wash hand basin.(As per CSR-2020 item No.30.43-i) |
| 49 | Providing & fixing in position 5 mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge).(a) Size 600mm x 450mm(As per CSR-2020 item No.30.61-a) |
| 50 | Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)(As per CSR-2020 item No.30.33) |
| 51 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect. (A) CP Brass fitting(ii) C.P. brass Bib cock with Wall flange.(As per CSR-2020 item No.30.69-A-ii) |
| 52 | Providing & fixing in position 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. Brass Bib cock/Stop cock 15mm x 400gm.(As per CSR-2020 item No.30.65-A-iv) |
| 53 | Providing and fixing in position premium range C.P brass fitting and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect).(B) C.P Brass accessories. |
| 54 | (i) C.P. brass towel rail 600 mm long(As per CSR-2020 item No.30.69-B-i) |
| 55 | (iii) C.P. brass soap dish holder with glass dish(As per CSR-2020 item No.30.69-B-iii) |
| 56 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect.(b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut.(As per CSR-2020 item No.30.72-b) |
| 57 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors, etc.(b) With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg)(As per CSR-2020 item No.30.79-b) |
| 58 | Cutting chase in brick walls in cement or in floor for embedding G.I or C.I pipes line and making good the same to its original condition.(a) Size 75 mm x 75 mm(As per CSR-2020 item No.30.85-a) |
| 59 | Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.(As per CSR-2020 item No.30.20) |
| 60 | Providing and fixing and jointing brass ball valves screwed with SS/Brass ball/Spindle and Teflon seats on G.I Pipes lines including all carriages complete (a) 15mm i/d Brass Ball valves.(As per CSR-2020 item No.28.44-a) |
| 61 | Providing & placing in position on terrace (at all floor level) HDPE Water Storage Tank of approved make (to the approval of Engineer-in-Charge) with cover with suitable looking arrangement and making necessary holes for inlet, outlet ant over flow pipe but without fitting and support for tank.(i)Triple layer tank.(As per CSR-2020 item No.30.97-A-i) |
| 62 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition (a)Size 225 mm x 225mm](As per CSR-2020 item No.30.85-d & A/C Slip No.4) |
| 63 | Providing and fixing SWR UPVC soil waste vent or antisyphonage pipe as per IS: 13592 of approved make (to the approval of Engineer-in-Charge) including cutting, jointing, wastage but excluding the cost of lead jointing.iii- (B) B-type - (b) 110mm o/d SWR UPVC pipe line laid complete.(As per CSR-2020 item No.30.74-iii-B-b) |
| 64 | Providing and fixing SWR UPVC soil waste vent or antisyphonage pipe as per IS: 13592 of approved make (to the approval of Engineer-in-Charge) including cutting, jointing, wastage but excluding the cost of lead jointing.iii- (B) B-type - (b) 75mm o/d SWR UPVC pipe line laid complete.(As per CSR-2020 item No.30.74-iii-B-d) |
| 65 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 66 | a) 15mm i/d G.I. Union(As per CSR-2020 item No.28.40-a) |
| 67 | a) 20mm i/d G.I. Union(As per CSR-2020 item No.28.40-b) |
| 68 | Providing & fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect.(b) C.P.brass 15mm Concealed stop cock with flange(As per CSR-2020 item No.30.66-b) |
| 69 | RECESSED PVC CONDUCT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½\\" deep for walls and CI 3\\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface): -[A/C Slip No 34.02 (i) (a), (ii), (iii), (iv), (vi) |
| 70 | (i) Wiring fan point (Without fan box)(As per CSR-2020 items No.34.02-i-A) |
| 71 | (ii) Wiring light point(As per CSR-2020 items No.34.02-ii) |
| 72 | (iv) Wiring 6Amp. wall socket point(As per CSR-2020 items No.34.02-iv) |
| 73 | (vi) Wiring 16/20Amp. power plug control point(As per CSR-2020 items No.34.02-vi) |
| 74 | MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs: - |
| 75 | MCB Single Pole 0.5-4amp. (10kA, Curve C)(As per CSR-2020 item No.34.16 A(i) with A& C Slip 10) |
| 76 | MCB Single Pole 40amp. (10kA, Curve-C)(As per CSR-2020 item No. 34.16A (iii) with A& C Slip 10) |
| 77 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc: |
| 78 | SP&N Double Door Distribution Board 8 way each(As per CSR-2020 item No. 34.17-ii) & A/C Slip No.3) |
| 79 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge: - |
| 80 | Overall size 2.5sq.mm (Un-sheathed)(As per CSR-2020 item No. 34.09 (iii) with A&C Slip 10) |
| 81 | PVC, HDPE PIPES & PVC FLEXIBLEPIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537: Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General specifications.(As per CSR-2020 item No. 34.12-i) |
| 82 | Dismantling Wiring points |
| 83 | (i) Fan, Light or call bell point(As per CSR-2020 item No.34.39-i) |
| 84 | (ii) Wall Socket, power plug point(As per CSR-2020 item No.34.39-ii) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender