Tender For Construction Of Gr Anchayat Office Building At Warthan Tq Sygaon
Tender Value
25 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
4 days left
EMD
25000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Gr Anchayat Office Building At Warthan Tq Sygaon
BOQ
| Sl. No. | Item Description |
| 1 | EXCAVATION FOR FOUNDATION IN EARTH, SOIL OF ALL TYPES, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.) BY MECHANICAL Means [SSR 2022-23, It. No.21.02, P. No.153, Spec. No.: Bd.A.1 P.259] |
| 2 | Providing SOLING USING 80 MM SIZE TRAP METAL IN 15 CM. LAYER including filling voids with Crushed sand/grit, ramming, watering etc. complete. [SSR 2022-23, It. No.21.4, P. No.157, Spec. No.: As directed by Engineer in charge] |
| 3 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M-10 of trap/ granite/quartzite/ gneiss metal FOR FOUNDATION AND BEDDING including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) [SSR 2022-23, It. No.24.01, P. No.175, Spec. No.: Bd.E.1 P.287] |
| 4 | Providing and laying in situ /Ready Mix CEMENT CONCRETE M-20 of trap / granite /quartzite/ gneiss metal FOR R.C.C. WORK IN FOUNDATIONS LIKE RAFT, STRIP FOUNDATIONS, GRILLAGE AND FOOTINGS of R.C.C. columns and steel stanchions etc. complete (Excluding reinforcement and structural steel) with SCADA enabled mixer plant. [SSR 2022-23, It. No.25.11, P. No.178, Spec. Bd.F.3 P.298 & B.7 P.38] |
| 5 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap / granite/quartzite/ gneiss metal FOR R.C.C. COLUMNS as per detailed designs and drawing including steel centering, formwork, cover blocks, laying/pumping, compaction finishing with CM 1:3 curing etc. complete. [SSR 2022-23, It. No.25.31, P. No.179, Spec. Bd.F.5 P.300 & B.7 P.38] |
| 6 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap / granite/quartzite/ gneiss metal FOR R.C.C. BEAMS AND LINTELS as per detailed designs and drawings including centering, formwork, cover blocks, compaction, roughening and curing complete. [SSR 2022-23, It. No.25.5, P. No.181, Spec. Bd.F.6 P.300 & B.7 P.38] |
| 7 | Providing SECOND CLASS BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 IN FOUNDATIONS AND PLINTH of inner walls/ in plinth external walls including bailing out water manually, striking joints, raking out joints, watering etc. complete. [SSR 2022-23, It. No.27.01, P. No.197, Spec. Bd.G.1 P.313] |
| 8 | Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:4 IN HALF BRICK THICK WALL including mild steel longitudinal reinforcement of 2 bars of 6 mm dia / hoop iron strips, scaffolding, watering etc. complete. [SSR 2022-23, It. No.27.06, P. No.197, Spec. Bd.G.7 P.316] |
| 9 | FILLING IN PLINTH AND FLOORS WITH CONTRACTORS MATERIAL/ brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. [SSR 2022-23, It. No.21.37, P. No.157, Spec. Bd.A.11 P.263] |
| 10 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 FOR R.C.C. SLABS AND LANDINGS as per detailed designs and drawings including formwork, cover blocks, compaction, finishing with CM 1:3, curing etc. complete. [SSR 2022-23, It. No.25.7, P. No.182, Spec. Bd.F.8 P.302 & B.7 P.38] |
| 11 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 FOR R.C.C. CHAJJA as per detailed design and drawings including formwork, compaction, curing etc. complete. [SSR 2022-23, It. No.26.05, P. No.184, Spec. Bd.F.9 P.303 & B.7 P.38] |
| 12 | Providing and fixing in position TMT FE 500 BAR REINFORCEMENT OF VARIOUS DIAMETERS for R.C.C. pile caps, footings, slabs, beams, columns, chajjas, lintels etc. including cutting, bending, hooking, binding with wires or tack welding complete. [SSR 2022-23, It. No.26.33, P. No.188, Spec. Bd.F.17 P.306] |
| 13 | Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 IN SUPERSTRUCTURE including striking joints, raking out joints, watering and scaffolding etc. Complete. [SSR 2022-23, It. No.27.05, P. No.197, Spec. Bd.G.5 P.315] |
| 14 | Providing and FIXING FRAME with / without ventilator of size as specified WITH COUNTRY NON TEAK WOOD for doors and windows including chamfering, rounding, rebating, iron holdfast 300x40x5mm with oil painting complete. [SSR 2022-23, It. No.39.02, P. No.245] |
| 15 | Providing and fixing M40 GRADE THICK VIBRATED PULL CAST OR SIMILAR TYPE CONCRETE FRAME with chamfer conforming to I.S. 6524-1983 (6mm dia bars 3 Nos, stirrups @250mm c/c, holdfasts) FRAME SIZE 60 MM X 100 MM. [SSR 2022-23, It. No.39.56, P. No.258] |
| 16 | Providing and fixing COUNTRY CUT TEAK WOOD DOUBLE OR SINGLE LEAF PANELLED SHUTTERS, 35 mm thick style top and freeze rail 95x35mm with lock and bottom rail 195x25mm and panels without ventilator including oil painting 3 coats complete. [SSR 2022-23, It. No.39.08, P. No.246, Spec. BD-T-11/12 P.482] |
| 17 | Providing and fixing SOLID CORE FLUSH DOOR SHUTTER IN SINGLE LEAF 32 MM THICK decorative exterior grade with face veneers 3mm thk, beads, mouldings, CP fixtures, brass mortise lock, French Polish complete. [SSR 2022-23, It. No.39.09, P. No.246, Spec. BD-T-34 P.499] |
| 18 | Providing and fixing FIBER GLASS REINFORCED POLYESTER (FRP) DOOR SHUTTER 30 MM THICK as per IS 14856 (2000) without ventilator with CP fixtures & handles complete. [SSR 2022-23, It. No.39.58, P. No.258] |
| 19 | Providing and fixing STEEL VENTILATOR FULLY GLAZED PARTLY FIXED with 5mm plain/obscured glass, iron oxidized fixtures, 2 coats oil paint complete. [SSR 2022-23, It. No.39.29, P. No.249, Spec. BD-T-53 P.509] |
| 20 | Providing and fixing MILD STEEL GRILL WORK FOR WINDOWS, VENTILATORS ETC. 20 kg/sqm as per drawing including fixtures, welding, primer & 2 coats oil paint complete. [SSR 2022-23, It. No.40.01, P. No.264, Spec. Bd.U.1 P.537] |
| 21 | Providing and fixing in position ALUMINIUM SLIDING WINDOW OF TWO TRACKS with powder coating without box, 5mm plain glass, roller bearings, self locking catch complete. [SSR 2022-23, It. No.39.4, P. No.252] |
| 22 | Providing internal CEMENT PLASTER 12MM THICK in single coat in cement mortar 1:4 without neeru finish to concrete/brick surfaces including scaffolding & curing complete. [SSR 2022-23, It. No.32.04, P. No.209, Spec. Bd.L.2 P.368] |
| 23 | Providing and applying TWO COATS OF WALL CARE PUTTY ON PLASTERED SURFACE AND CEILING AND WALLS to prepare surface even and smooth complete. [SSR 2022-23, It. No.32.34, P. No.212] |
| 24 | Providing internal/external CEMENT PLASTER 20MM THICK in single coat in cement mortar 1:4 without neeru finish including scaffolding and curing complete. [SSR 2022-23, It. No.32.07, P. No.209, Spec. Bd.L.4 P.368] |
| 25 | Providing FINE CEMENT FINISH 1.5 MM THICK OVER GREEN PLASTER SURFACE including scaffolding and curing complete. [SSR 2022-23, It. No.32.21, P. No.210] |
| 26 | Providing and laying VITRIFIED MIRROR / GLOSSY FINISH TILES (590-605mm x 590-605mm, 8-10mm thk, IS 15622-2006 Gr Bla) FOR FLOORING on 1:4 mortar bed complete. [SSR 2022-23, It. No.33.4, P. No.217, Spec. Bd.M.12 P.385] |
| 27 | Providing and laying VITRIFIED MIRROR / GLOSSY FINISH TILES FOR DADO AND SKIRTING (590-605mm) fixed in 1:4 mortar bed complete. [SSR 2022-23, It. No.33.41, P. No.217, Spec. Bd.M.12 P.385] |
| 28 | Providing and laying ANTISKID CERAMIC TILES of 30 cm x 30 cm for antiskid flooring on 1:4 mortar bed complete. [SSR 2022-23, It. No.33.67, P. No.220, Spec. Bd.M.12 P.385] |
| 29 | Providing and laying CERAMIC TILES size 30cm x 45cm FOR DADO AND SKIRTING with readymade adhesive on 1:2 CM plaster complete. [SSR 2022-23, It. No.33.26, P. No.215, Spec. Bd.M.13 P.386] |
| 30 | Providing and laying CHEQUERED TILES of size 30 cm x 30 cm for flooring on 1:4 mortar bed complete. [SSR 2022-23, It. No.33.66, P. No.220, Spec. Bd.M.12 P.385] |
| 31 | Providing and fixing H.D.P CONTAINER ONE PIECE MOULDED WATER TANK (Syntex or alike) CAPACITY BETWEEN 200 TO 1000 LITERS complete with fittings. [SSR 2022-23, It. No.42.53, P. No.280] |
| 32 | Providing, laying and fixing P.V.C. PIPE OF 25MM DIA with fittings, excavation, trench filling complete. [SSR 2022-23, It. No.42.23, P. No.276] |
| 33 | Providing, laying and fixing P.V.C. PIPE OF 15MM DIA with fittings, excavation, trench filling complete. [SSR 2022-23, It. No.42.21, P. No.276] |
| 34 | Providing and fixing SCREW DOWN FOR 20 MM DIA WHEELED STOP TAP OF BRASS complete. [SSR 2022-23, It. No.41.44, P. No.270, Spec. Bd.V.9 P.555] |
| 35 | Providing and fixing 15 MM DIA SCREW DOWN BIB/ STOP TAP OF BRASS complete. [SSR 2022-23, It. No.41.4, P. No.270, Spec. Bd.V.8 P.554] |
| 36 | Providing and fixing ORISSA TYPE WHITE GLAZED EARTHENWARE 575 MM WATER CLOSET (WC) PAN with S-trap, foot rests, vent pipe, 1:2:4 concrete bedding complete. [SSR 2022-23, It. No.42.3, P. No.277] |
| 37 | Providing and fixing 10 CM PVC NAHANI TRAP WITH GRATING complete. [SSR 2022-23, It. No.42.67, P. No.281, Spec. BD.V 32A P.551] |
| 38 | Providing and constructing BRICK MASONRY INSPECTION CHAMBER 60CM X 45CM X 90CM with CC foundation, channels, plaster, RCC Cover medium duty 140kg complete. [SSR 2022-23, It. No.42.12, P. No.275, Spec. Bd.V.43 P.574] |
| 39 | Providing and fixing 100 MM DIA STABILISER PIPE/ P.V.C. SOIL VENT/WASTE PIPE with fittings complete. [SSR 2022-23, It. No.42.52, P. No.279] |
| 40 | Providing and fixing white glazed earthenware WASH HAND BASIN OF 45CM X 30CM SIZE with pillar tap, brackets, plug, chain, waste pipe complete. [SSR 2022-23, It. No.41.64, P. No.272, Spec. Bd.V.30 P.565] |
| 41 | Providing SOAK PIT OF SIZE 120CM X 120CM X 120CM including excavating and filling with brick-bats complete. [SSR 2022-23, It. No.42.19, P. No.275, Spec. Bd.V.46 P.576] |
| 42 | Providing and applying WASHABLE OIL-BOUND DISTEMPER in two coats including scaffolding, surface preparation complete. [SSR 2022-23, It. No.36.11, P. No.227, Spec. Bd.P.5 P.413] |
| 43 | Providing and applying TWO COATS OF WATER PROOF CEMENT PAINT of approved make and colour complete. [SSR 2022-23, It. No.35.13, P. No.224, Spec. Bd.O.8 P.406] |
| 44 | Providing and fixing BOARD DISPLAYING INFORMATION (Name of work, Tender cost, Contractor etc.) size 1.20m x 0.90m with MS angles, concrete block 60x60x75cm complete. [SSR 2022-23, It. No.6.36, P. No.60, Spec. MORTH 801] Please Enable Macros to View BoQ information Tender Inviting Authority: Addl. Chief Executive Officer, Zilla Parishad, Chhatrapati Sambhajinagar. Name of Work :- CONSTRUCTION OF FIVE ROOM Z.P. PSB & ALLIED WORKS, AT VILLAGE PIMPALGAON WALAN, TQ. PHULAMBRI. Contract No: ZPA/Works/e-Tender/Civil Works/ SPECIFICATION OF WORKS Sr. No. Description Specifications Page No. Additional Remark. |
| 45 | EXCAVATION FOR FOUNDATION IN EARTH, SOIL OF ALL TYPES, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (LIFT UPTO 1.5 M.) BY MECHANICAL Means |
| 46 | Providing SOLING USING 80 MM SIZE TRAP METAL IN 15 CM. LAYER including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 47 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M-10 of trap/ granite/ quartzite/ gneiss metal FOR FOUNDATION AND BEDDING including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 48 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE IN M15 of trap/ granite/quartzite/gneiss metal FOR FOUNDATION AND BEDDING / STEPS including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 49 | Providing and laying in situ /Ready Mix CEMENT CONCRETE M-20 of trap / granite /quartzite/ gneiss metal FOR R.C.C. WORK IN FOUNDATIONS LIKE RAFT, STRIP FOUNDATIONS, GRILLAGE AND FOOTINGS of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 50 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap / granite /quartzite/ gneiss metal FOR R.C.C. COLUMNS as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 51 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap / granite/quartzite/ gneiss metal FOR R.C.C. BEAMS AND LINTELS as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 52 | Providing SECOND CLASS BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 IN FOUNDATIONS AND PLINTH of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 53 | FILLING IN PLINTH AND FLOORS WITH CONTRACTORS MATERIAL/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 54 | Providing and laying Cast in situ/Ready Mix CEMENT CONCRETE M-20 of trap/ granite / quartzite/ gneiss metal FOR R.C.C. SLABS AND LANDINGS as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 55 | Providing and laying Cast in situ/Ready Mixcement CONCRETE M-20 of trap/ granite/ quartzite/ gneiss metal FOR R.C.C. CHAJJA as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 56 | Providing and fixing in position TMT - FE - 500 BAR REINFORCEMENT OF VARIOUS DIAMETERS for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 57 | PROVIDING AND APPLYING WATER PROOFING TREATMENT USING ACRYLIC POLYMER MODIFIED CEMENT BASED WATER PROOFING coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 58 | Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 IN SUPERSTRUCTURE including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 59 | Providing and laying TELEPHONE BLACK / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick FOR DOOR FRAME/ DADO/ WINDOW BOXING ETC. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. |
| 60 | Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer in charge and manufacturers specification and drawing etc. complete. |
| 61 | Providing and fixing MILD STEEL GRILL WORK FOR WINDOWS, VENTILATORS ETC. 20 KILOGRAM/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 62 | Providing and fixing in position. (as per I.S.1868 / 1982) ALUMINIUM SLIDING WINDOW OF TWO TRACKS with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. WITH POWDER COATING WITHOUT BOX |
| 63 | Providing and fixing WELDED MESH OF 11 GAUGE WIRES HAVING MESH SIZE 50 MM X 25 MM INCLUDING M.S ANGLE FRAME of size 35 mm x 35 mm x5 mm in position with oil painting 3 coats etc. complete |
| 64 | Providing internal CEMENT PLASTER 12MM THICK in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 65 | Providing and applying TWO COATS OF WALL CARE PUTTY ON PLASTERED SURFACE AND CEILING AND WALLS to prepare surface even and smooth of approved make, etc complete. |
| 66 | Providing internal CEMENT PLASTER 20MM THICK in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. |
| 67 | Providing and laying VITRIFIED MATT FININSH TILES having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern FOR FLOORING in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 68 | Providing and laying VITRIFIED MATT FINISH TILES having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern FOR DADO AND SKIRTING in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 69 | Providing and laying machine cut machine POLISHED MACHINE CUT KOTA STONE SLABS 20 to 25 mm thick FOR TREADS AND RISERS of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 70 | Providing and laying CHEQUERED TILES of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. |
| 71 | Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 72 | Providing and constructing 75 MM. THICK MODIFIED PENETRATION MACADAM (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% CRUSHER BROKEN METAL + 70% HAND BROKEN (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. INCLUDING PICKING OF EXISTING WBM SURFACE. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 73 | Providing and applying TACK COAT on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 74 | OPEN GRADED PREMIX SURFACING- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( OVER MPM SURFACE) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 75 | PROVIDING BITUMINOUS TYPE A LIQUID SEAL COAT ON BITUMINOUS SURFACE including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 76 | Providing and applying PRIMING COAT ON CONCRETE/ MASONARY/ ASBESTOS CEMENT PLASTERED SURFACES including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 77 | Providing and applying PLASTIC EMULSION PAINT of approved quality, colour and shade to old and new surfaces IN TWO COATS including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. |
| 78 | Providing and applying TWO COATS OF EXTERIOR ACRAYLIC EMULSION PAINT confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 79 | Providing and fixing BOARD DISPLAYING INFORMATION, SUCH AS 'NAME OF WORK, TENDER COST, NAME OF CONTRACTOR, WORK COMPLETION AND LIABILITY PERIOD ETC', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender