Tender for Tender for Hariparvat Zone Road Construction Work Involving The Laying Of Interlocking Tiles And Drains, And Hot-Mix Surfacing On The Side Berms Along The Stretch From Amar Ujala Press To K.R. Nagar T-Junction, From Dr. Sahab Place To Devi
Tender Value
1.35 Crore
Estimated cost
Bid Submission
16 Sep 2026
4 days left
EMD
8.79 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Hariparvat Zone Road Construction Work Involving The Laying Of Interlocking Tiles And Drains, And Hot-Mix Surfacing On The Side Berms Along The Stretch From Amar Ujala Press To K.R. Nagar T-Junction, From Dr. Sahab Place To Deviram Ji Place, The
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Old Interlocking Tiles pavement including staking of serviceable material and disposal of unserviceable material within lead of 50m as per direction of Engineer in charge. (NS) |
| 2 | Cartage of Malva, Silt, sludge kankar and other disposable organic material etc. all complete with labour T&P including cartage of 8 km. (Chapter No.3 Si.No.8) |
| 3 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (22.40-53mm) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. |
| 4 | Supply & Laying of I shaped (Zigzag) precast lnterlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50k9) lncluding 0.30mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work.80 mm (Rubber molded Grey) |
| 5 | Supply & Laying of I shaped (Zigzag) precast lnterlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50k9) lncluding 0.30mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work.80 mm (Rubber molded Coloured) |
| 6 | Class-150 Brick Work in 1:4 Cement and Coarse Sand, mortar in foundation and plinth including supply of all materials, labor and tools and plants, etc. Required for proper completion of the work. ( Chapter No. 06 Sr.No. 2) |
| 7 | 12mm thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not excluding 80mm in girth and finished even and smooth. No extra for mixing any additive. (c) 1 Cement : 4 Coarse sand. (Chapter No.13 Si.No.2) |
| 8 | Providing and laying Cement Concrete in 1:2:4 of not less than strength of M-15 stone grit (20 mm nominal size) approved coarse sand and cement. Curing complete including of cost of form work in foundation and floors.(5-Chapter Sr.No.6 Si.No..4.1.3) |
| 9 | Providing and applying Primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. (As per Attached Analysis) |
| 10 | Providing, laying and rolling dense graded bituminous macadam with batch type HMP using crushed aggregates, premixed with bituminous binder @ 4.5% by weight of mix, transporting hot mix, laying with hydrostatic paver finisher, and compaction with smooth, vibratory & tandem rollers |
| 11 | Providing and applying tack coat with bitumen emulsion using pressure distributor at the of 0.20 kg per sqm an the prepared bituminous/granular surface cleaned with mechanical broom. |
| 12 | Providing and laying bituminous concrete with batch type HMP using crushed aggregates premixed with bituminous binder @ 5.4 percent by weight of total mix, transporting hot mix, laying with hydrostatic paver finisher, and compaction with smooth steel wheeled tandem and pneumatic tyre rollers.Bituminous Concrete (Grading - II, 13.2 mm Nominal Size) |
| 13 | Road Marking with Hot Applied Thermoplastic Compound with Reflectrosing Glass Beads on Bituminous Surface. Providing & Laying of hot applied thermoplastic compound 2.5mm thick including reflecto rising glass beads @ 250gm/Sqm. Area, thickness of 2.5mm is exclusive of surface applied glass, beads as per I.R.C. 35. The finish surface to be level uniform and free form steaks and holes composition of thermoplastic material shall be as per table 800-3 of clause 803 of MORTH including cost of work as per direction E/IC. (Chapter-28 Si.No.2) |
| 14 | Supply and Fixing Cat EYE including supply of all material, loabour, T&P etc. all complete. (Chapter No.28 Si.No.5b) |
| 15 | Supply & Fixing Granite Stone Work Display Board (Size 2.50ft x 4.00ft) including Painting, Lettering etc. all complete. (None Schedule) |
| 16 | Sub Total (A) |
| 17 | Deduction Cost of Material Old Interlocking tiles etc. all complete. |
| 18 | Sub Total (B) |
| 19 | Sub Total (A-B) = (C) |
| 20 | Add / Deduction For Estimate Figure Amount Match |
| 21 | Grand Total Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender