Tender For Construction Of Compound Wall To The Park At Abirami Nagar In Ward No:21 North Zone. Roc.No. 6847/2026/D3(N)
Tender Value
9.98 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
9 days left
EMD
9980
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Compound Wall To The Park At Abirami Nagar In Ward No:21 North Zone. Roc.No. 6847/2026/D3(N)
BOQ
| Sl. No. | Item Description |
| 1 | Providing Pile foundation of size 300 mm dia using augur including labour charges and all other tools and plants charges etc. , as per direction of dept officers |
| 2 | Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrams, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification. |
| 3 | Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken / Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layer so not more than 15cm thick and compacted etc., complete complying with standard specification. |
| 4 | Supplying and erecting centering for soffits of RCC slabs, plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with M.S angles of size 25mm x 25mm x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced of 75cm c/c) etc., complete complying with standard specification. |
| 5 | Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification |
| 6 | Supplying, fabricating and placing in position of Steel Reinforcement using Mild Steel or Ribbed Tor steel bars for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification. |
| 7 | Reinforced cement concrete 1:1½:3 [one cement, one and half M-sand and three course aggregates] using 20mm size Hard Broken / Machine crushed Granite Stone Jelly for all RCC items of works excluding centering, shuttering and cost of reinforcement, including curing, fixing fan clamp and fixtures if necessary etc., complete complying with standard specification. |
| 8 | Fly Ash Brick work In CM 1:5 mix (one cement and five M-sand) using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing, curing etc., complete complying with standard specification. |
| 9 | Plastering with cement mortar 1:5 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification. |
| 10 | Supply, fabricating & fixing in position of M.S Doors / Windows / Ventilators / Gates / Grills of required of size suitable to site condition using necessary 'L' Angles, flats, I sections covered with 18 gauge M.S.Sheet with one coat red oxide primer including cost and conveyance of materials, all labour charges for fabrication, fixing with all furnitures fittings etc., complete as directed by departmental officer. |
| 11 | Supplying, Fabricating and Fixing of Main GATE and Wicket Gate required of size suitable to site condition using necessary 'L' Angles, flats, I sections covered with 18 gauge M.S.Sheet with one coat red oxide primer including cost and conveyance of materials, all labour charges for fabrication, fixing with all furnitures fittings with Nural Design etc., Complete |
| 12 | Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification |
| 13 | Painting two coats for New iron work surface using best quality synthetic enamel paint etc complete complying with standard specification. |
| 14 | Plain Cement concrete 1:2:4 (one cement, two sand and four aggregate ) using 20mm gauge hard broken granite stone jelly for All RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing etc., complete fixtures in CC works wherever necessary as directed by departmental officer etc., complete. |
| 15 | Supply & fixing of 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length |
| 16 | Add :- GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender