Tender For Block : Tn04-02-16 -(Csc Model Ii) Type-6A -Aip - Sbm(G) - 2026-27 - Nall Alli Block - P16name Of Work: Construction Of Mini Community Sanitary Complex (Csc Model Ii ) Type-6A - Punitha Arulappar High School Kovilor Head Of Nall Alli.
Tender Value
8.67 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
10 days left
EMD
8670
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dharmapuri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Block : Tn04-02-16 -(Csc Model Ii) Type-6A -Aip - Sbm(G) - 2026-27 - Nall Alli Block - P16name Of Work: Construction Of Mini Community Sanitary Complex (Csc Model Ii ) Type-6A - Punitha Arulappar High School Kovilor Head Of Nall Alli.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Mini Community Sanitary Complex (CSC Model II ) Type-6A - Punitha Arulappar High school Kovilor H/O Nallampalli. |
| 2 | Earth work excavation and depositing on bank with initial lead and list in all clauses as soil as per SS 20 B |
| 3 | Cement concrete 1:4:8 mix using 40mm metal including cost and Conveyance of all site etc. Complete. |
| 4 | Brick work in cm 1:5 Mix using new country bricks including cost and Conveyance of all site etc. complete. |
| 5 | Supplying erecting steel centering for lintel, sunshade and Roof slab etc complete |
| 6 | Supplying erecting steel centering for lintel, sunshade and Roof slab etc completeRoof slab |
| 7 | Reinforced Cement concerete 1:1.5:3 using 20mm.H.B.G.jelly for all R .c.c. items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing but providing fixtures |
| 8 | Supply and fabrication of steel including , cutting, bending and binding wires etc. complete. |
| 9 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 10 | Providing granolethic floor finishsed ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum |
| 11 | Plastering in CM 1:5 mix using 12mm thick including cost conveyance of all site etc. complete. |
| 12 | Supplying and Fixing of Tubular Pipe including cost and conveyance of all materials and all labour charges etc. |
| 13 | Roofing with Galvanised Iron Corrugated Sheet of Thickness 0.8mm including cost of J Bolts,washer etc |
| 14 | Paving the Floor with scratch proof Anti Skid tiles of size 305x305x6mm including cost and conveyance of all materials and all labour charges etc. |
| 15 | Dadooing of walls with colour glazed tiles of size 150x150x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc |
| 16 | Distembering two coats including priming coat with best approved distember and primer including costand conveyance of all materials to site and all labour charges etc |
| 17 | EXTERIER EMULSION two coats including priming coat with best approvedEMULSION and primer including costand conveyance of all materials to site and all labour charges |
| 18 | Painting two coats for Door & Ventilator including cost and Conveyance of all site etc. Complete. |
| 19 | Supply and Cost of Steel door , Window, VentilatorDoor (0.75 x 2.10m)Door (1.10 x 2.10m)Jolly (0.60x0.45m) |
| 20 | Supply and Cost of Steel door , Window, VentilatorDoor (1.10 x 2.10m) |
| 21 | Supply and Cost of Steel door , Window, VentilatorJolly (0.60x0.45m) |
| 22 | Provision of Water Supply arangment110 mm PVC Pipe |
| 23 | 110 mm PVC Elbow |
| 24 | 25 mm PVC Pipe |
| 25 | 25 mm PVC Elbow |
| 26 | 25 mm PVC Tee |
| 27 | 32 mm GI Pipe |
| 28 | Electrifaction ArrangementsLight/Fan Point SD 20 |
| 29 | Tube Light SD 88 |
| 30 | CFL Light SD 80 |
| 31 | Provision of Hand Rail GI Pipe32 mm GI Pipe |
| 32 | Provision of IWC |
| 33 | Provision of EWC |
| 34 | Provision of Squatting Urinal |
| 35 | Provision of Name Board |
| 36 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender