Tender For Restoration And Preservation Of Old Nizam Ud Din Masjid At Poonch Aaa:- Director Directorate Of Archives, Archaeology & Museums, J&K Order No:-Daa&M-274 Of 2026 Dated:- 02-06-2026
Tender Value
51.54 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
2 days left
EMD
1.03 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration And Preservation Of Old Nizam Ud Din Masjid At Poonch Aaa:- Director Directorate Of Archives, Archaeology & Museums, J&K Order No:-Daa&M-274 Of 2026 Dated:- 02-06-2026
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Sep-2026 | Corrigendum | Other | 28-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 2 | Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth including curing complete in:Lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 fine sand) |
| 3 | Extra for tile bricks masonry with common burnt clay tile bricks in superstructure above plinth level upto floor five level. |
| 4 | Extra for tile brick masonry with common burnt clay tile bricks curved on plan upto a mean radius not exceeding 6 meters. |
| 5 | Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete with:Cement mortar Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand).1st Sort |
| 6 | Extra for coursed rubble masonry with hard stone (First or second sort) in : Circular pillars |
| 7 | Taking out existing wooden door shutter, repair by cutting, painting etc.and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class deodar wood |
| 9 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First Class deodar wood |
| 10 | Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.First class deodar wood |
| 11 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second Class deodar wood. |
| 12 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 13 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 14 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :150x10 mm |
| 15 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm |
| 16 | Providing and laying in situ five course water proofing treatment with APP (Atactic Poly Propylene) modified Polymeric membrane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as100micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20micron HMHDPE film, 5th top most layer shall be finished with brick tiles of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 Fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). |
| 17 | Providing and laying common burnt clay (non modular) brick tiles of class designation 10 over mumty roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compoundby weight of cement, over a 12 mm layer of cement mortar 1:3 (1 cement :3 fine sand) and finished neat. |
| 18 | Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 19 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 20 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 21 | Lime plaster 15 to 40 MM thickness on flat wall/vertical surfaces Providing and application of lime - surkhi Plaster 1:1 (1 slaked Lime: 1 surkhi) on wall surfaces of thickness between 15 to 40 MM including organic additives like sugarcane molasses, extracts of beil,maithi, etc. as per traditional practices. The preparation of mortar is to be done following traditional practice includes using chakki/garat (wet grinding of lime and sand by heavy stone mill / chakki/garat), application of mortar in 3 layers with last layer of 6 MM thick, with a gap of minimum 3 days and not more than 10 days from previous layer. The item rate includes application of Loi, tampering, beating, reworking of plaster till the shrinkage cracks disappear and desired finish achieved and curing for 10 days. Item also includes all lead and lift, establishing work yard / chakki etc. tools implements etc. as required on site. |
| 22 | Lime plaster 5 to 10 MM thickness on ceiling and curved surfaces. Providing and application of Lime - surkhi Plaster 1:1 (1 slaked Lime: 1 surkhi) on wall surfaces of thickness between 5 to 10 MM including organic additives like sugarcane molasses,extracts of beil, maithi, ete as per traditional practices. The preparation of mortar is to be done following traditional practice includes using chakki/garat (wet grinding of lime and sand by heavy stone mill / chakki/garat), application of mortar in single layers, with a gap of minimum 3 days and not more than 10 days from previous layer. The item rate includes application ofLoi, tampering, beating, reworking of plaster till the shrinkage cracks disappear and desired finish achieved and curing for 10 days. Item also includes all lead and lift, establishing work yard / chakki, scaffolding, formwork tools and implements etc. |
| 23 | Decorative/ Ornamental plaster plaster work in lime surkhi mortar (1:2) as per traditional practice and design,The preparation of mortar is to be done following traditional practice includes using chakki/garat (wet grinding of lime and sand by heavy stone mill / chakki/garat). The thickness varying from 10mm to 100mm as per design, as directed by Engineer incharge/ Consultants, and including all leads, lifts; and carriage. All complete. |
| 24 | Providing and applying lime Kara 1:1 (1 lime : 1 zikka powder ) grinding or with grinding mill/ mannually on lime base on flat surface in two coats , first coat applying 3mm to 4mm thick and curing properly at least 7 days and finishing coat done after 7 days of previous coat as per traditional Practise (thickness not more than 6mm.) Notes: -Zikki powder shall be free of any impurities, lumps, etc.-The preparation is to be done following traditional practice includes using chakki/ garat (wet grinding of lime and Zikki powder by heavy stone mill / chakki/garat)-Only Fat Lime / non hydraulic shall be used and should be free of any impurities.-Final layer of Kara shall be cured and traditional process of rubbing & polishing shall be done by expert craftsman till desired finish is not achieved on the surface.-Post application, surface shall be free from any kind of hairline cracks, undulations, patchy finish.-Finished surface shall be free from any powder / chalk on the surface. |
| 25 | Providing and applying lime Kara 1:1 (1 lime : 1 zikka powder ) grinding or with grinding mill/ mannually on lime base on ceilling and all curved surface in two coats , first coat applying 3mm to 4mm thick and curing properly at least 7 days and finishing coat done after 7 days of previous coat as per traditional Practise (thickness not more than 6mm.). Notes: -Zikki powder shall be free of any impurities, lumps, etc.-The preparation is to be done following traditional practice includes using chakki/ garat (wet grinding of lime and Zikki powder by heavy stone mill / chakki/garat)-Only Fat Lime / non hydraulic shall be used and should be free of any impurities.-Final layer of Kara shall be cured and traditional process of rubbing & polishing shall be done by expert craftsman till desired finish is not achieved on the surface.-Post application, surface shall be free from any kind of hairline cracks, undulations, patchy finish.-Finished surface shall be free from any powder / chalk on the surface. |
| 26 | Providing lime kara on decorative/ornamental surfaces/stucco or embellishments as per decorative /ornamental designs as per old existing carving on surface highly precise. Providing and applying lime Kara 1:1 (1 lime : 1 zikka powder ) grinding or with grinding mill/ mannually on lime base in two coats on decorative ornamental surfaces , first coat applying 3mm to 4mm thick and curing properly at least 7 days and finishing coat done after 7 days of previous coat as per traditional Practise thickness not more than 6mm. |
| 27 | Raking out joints of stone masonry surface to the required width and depth, with due care and precaution by mechanical/manual means including preparing and cleaning the surface for re-pointing / refilling of joints, including disposal of rubbish to the dumping ground within 50 mtrs lead. |
| 28 | Ruled/ Flush pointing on Red sand stone masonry surface with lime,surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate isinclusive of all materials and labours involved except scaffolding) |
| 29 | Stone tile work for wall lining upto 10m height with special adhesive like araldite or equivalent over 12mm thick bed of cement mortar 1: 3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade.Granite stone of any colour and shade |
| 30 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade.(Area of slab over 0.5 sqm) |
| 31 | Flooring with 16mm thick marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed withgrey cement slurry including rubbing, polishing and curing completewith:Pink plain marble |
| 32 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 33 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall bestiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.NOTE:- To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done |
| 34 | Making Cornice band with ornamental design as per the existing design with lime plaster 1:3(1 lime putty:3 fine sand) size 150mm wide and 50mm average thickness for repair of existing cornice,where ever required |
| 35 | Carriage of material by M.T incl loading/unloading & stacking complete |
| 36 | Lime avg. lead 233 Km by MT |
| 37 | Sand/Stone agg. below 40 mm nominal size avg. lead 233 Km by MT |
| 38 | Brick Tile avg. lead 233 Km by MT |
| 39 | Stone Rubble Masonary avg. lead 233 Km by MT |
| 40 | Dismanttelled Material and Debris/Plaster avg. lead 05 Km by MT |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 42 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 43 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing |
| 44 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 45 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 46 | PN-16 pipe , 40mm OD(SDR-7.4) |
| 47 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm |
| 48 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. Of quality and make as approved by Engineer - in - charge. |
| 49 | Providing and fixing following PVC fitting of appeoved quality as vectus or price |
| 50 | PVC Pipe 100mm dia |
| 51 | PVC Pipe 65mm dia |
| 52 | Floor Trap 65mm x100mm dia |
| 53 | P Trap 100mm |
| 54 | Floor Trap 65mm dia |
| 55 | PVC Plane band 100mm |
| 56 | Providing and fixing following C.P fitting of approved quality |
| 57 | Supply and fixing of Sink Mixer |
| 58 | Supply and fixing Toilet Paper Holder CP Brass |
| 59 | Supply and fixing Soap Dish |
| 60 | Supply and fixing Greting Lock Plane |
| 61 | Supply and fixing of grating lock Hole |
| 62 | Supply and fixing angel valve |
| 63 | Supply and fixing Towel Ring |
| 64 | Supply and fixing Towel Rod 24\\" |
| 65 | supply and fixing CP nipple 1/2\\" |
| 66 | Supply and fixing CP pple 1\\" |
| 67 | Supply and fixing PVC connection |
| 68 | Supply and fixing waste pipe |
| 69 | Supply and fixing BAL Bal 40mm |
| 70 | Providing and fixing 35 Ltr Water Gryser |
| 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 12, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender