Tender For Periodically Repair And Maintenance To Different Govt. Building (Kalna Sub Divisional Hospital Building Including Nurses Hostel And Superintendent Office, A.C.M.O.H. Office Building & Sub-Divisional Office Building, P.W.D.) Under Section-I (Non
Tender Value
3.95 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
7919
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Periodically Repair And Maintenance To Different Govt. Building (Kalna Sub Divisional Hospital Building Including Nurses Hostel And Superintendent Office, A.C.M.O.H. Office Building & Sub-Divisional Office Building, P.W.D.) Under Section-I (Non-Residential) Under Kalna Sub-Division P.W.D (Structural) & (Sanitary & Plumbing)
BOQ
| Sl. No. | Item Description |
| 1 | Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). (b) Medium size plant of girth of exposed stem above 75 mm.but not exceeding 150 mm. lift upto 6 mtr |
| 2 | (c) Medium size plant of girth of exposed stem upto 75 mm.but not exceeding 150 mm. lift upto 6 mtr |
| 3 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor ncluding removing rubbish within a ead of 75 m as directed. |
| 4 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar, (b) 20 mm thick plaster |
| 5 | (c) 15 mm thick plaster |
| 6 | (c) 10 mm thick plaster, 1.:4 cement morter |
| 7 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and einforcement,if any, in gound floor as per relevant IS codes |
| 8 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for nternal wall & upto 6m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m) |
| 9 | Extra for fixing glass panes in steel window. |
| 10 | Supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per IS:12866-1989. (In all floors for internal wall & upto 6 m height for external wall) (a) 1.2 mm thick (1.85 Kg/Sq.m) |
| 11 | Renewing worn out putty of glass panes :(b) Panes exceeding 0.2 Sq.m but not exceeding 0.5 Sq.m (a) 1.2 mm thick (1.85 Kg/Sq.m) |
| 12 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fittingand fixing with necessary coir, nails etc. as per direction of the Engineer-incharge (a) upto 5.50 m height |
| 13 | Shifting = 78.00 times ( Rs 524.00 @ 10 % ) |
| 14 | Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure, ground floo |
| 15 | Supply of G. I. pipes of TATA make including necessary sockets (e) 40 mm dia. i) Light quality |
| 16 | Supply of galvanised iron socket with I.S.I. mark (v) 40 mm dia. |
| 17 | (A) Labour for fitting and fixing G.I. pipes above ground (exposed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. complete in all respect with two coats of painting with approved paint any height. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of paintingwill be paid seperately) (v) 40 mm dia. |
| 18 | Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good alldamages excluding the cost of masonry or concrete work, if necessary, butincluding the cost and fitting and fixing holder bat clamps(any floor) orfor underground work including cutting trenches upto 1.5 metre andrefilling the same complete as per direction of the Engineer-in-charge.(Payment will be made on centre line measurement of the total pipelineincluding specials. (A)Above Ground (ix) 100 mm dia. / 110 mm dia. |
| 19 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting B) UPVC Fittings:ii)110 mm |
| 20 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length |
| 21 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. vi) 100mm. X 50mm. X 1.25mm |
| 22 | Renewing 125mm long wooden buffer block ii) With Sal : Malayasian |
| 23 | Renewing hinged cleat with old hinge and new screws.iii) Local Sal |
| 24 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (c) 300mm long. |
| 25 | Iron socket bolt of approved quality fitted and fixed complete. (e) 300mm long x 10mm dia bolt. |
| 26 | i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.b) Medium (I.S.I. size 2) |
| 27 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixedcomplete: railing etc. fitted and fixed with necessary screws and lugs in ground floor.(a) With continuous plate base (Hexagonal/ Round rod) (vii) 150 mm grip x 12 mm dia rod. |
| 28 | Styles and rails of wooden shutters fitted and fixed complete. (Payment to be made on area of new work only). In Ground Floor:(ii) 35mm Thick shutter.(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 29 | Panel (made of single plank) of door and window shutters to design as directed:In Ground Floor (Payment to be made on area of exposed new work). (In case of non-supply of single plank penal rate of reduction to a maximum of 30% will be made).(ii) 19mm thick panel of 30cm to 45cm width (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 30 | Supplying fitting and fixing I.R.C. fabric mesh with covering battens including cost of screws etc complete (excluding the cost of battens).In ground floor.(i) 25mm x 25mm x 2.7mm x 2.7mm. |
| 31 | Easing, oiling and adjusting the steel shutters including scraping all members and fitting so as to make the shutters easily operable (no extra payment will be made for taking out and fixing glass, if necessary) |
| 32 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as perdirection of Engineer in charge |
| 33 | Labour for dismantling G.I. pipe with fittings.(i) 15 mm |
| 34 | (ii) 20 mm |
| 35 | (iii) 25 mm |
| 36 | Refixing G.I. pipe with fittings after cleaning where necessary. (i) 15 mm |
| 37 | (ii) 20 mm |
| 38 | (iii) 25 mm |
| 39 | Removing chokage in G.I. pipe including cleaning pipe.(i) 15 mm |
| 40 | (ii) 20 mm |
| 41 | (iii) 25 mm |
| 42 | Dismantling and refixing bib cock or stop cock.(i) 15 mm |
| 43 | Supply of G.I. pipes of TATA make including necessary sockets.(a) 15 mm dia. (i) light quality |
| 44 | (b) 20 mm dia. (i) light quality |
| 45 | (c) 25 mm dia. (i) light quality |
| 46 | Supply of G.I. plain equal elow of approved brand and make. (i) 15 mm |
| 47 | (ii) 20 mm |
| 48 | Supply of G.I. plain plain tee of approved brand and make. (i) 15 mm |
| 49 | (ii) 20 mm |
| 50 | Supply of G.I. union.(i) 15 mm |
| 51 | (ii) 20 mm |
| 52 | (A) Labour for fitting and fixing G.I. pipes above ground (exposed) in structures with holder bat clamps including cost of jointing materials, holder bat clamps etc.,as necessary, including cutting pipe, making threads etc. (i) 15 mm |
| 53 | (ii) 20 mm |
| 54 | (iii) 25 mm |
| 55 | Labour for fitting and fixing G.I. specials including cost of jointing materials.(b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow, Nipple, Short piece.(i) Upto 25 mm dia. |
| 56 | (c) Plain tee, Reducing tee, Pendent tee, Jamnut, Socket and Nipple. (i) Upto 25 mm dia. |
| 57 | (d) Cross, Union, Long screw. |
| 58 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union etc.(A) For Exposed Work(a) (i) 15 mm dia. light quality |
| 59 | (b) (i) 20 mm dia. light quality |
| 60 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 etc.(a) For Exposed Work PVC Pipes (Dia) 50 mm |
| 61 | Supplying, fitting and fixing Peet’s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm) (viii) 20 mm |
| 62 | Supplying, fitting and fixing bib cock or stop cock (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model – Tropical / Sumthing Special of ESSCO or similar brand) |
| 63 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513 (A) & 513 (B) & Model –Tropical / Sumthing Special of ESSCO of similar brand) |
| 64 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent Equivalent to Code No. 5053 & Model- Florentine of Jaquar or similar brand) |
| 65 | (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm |
| 66 | (g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 mm |
| 67 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coates of painting to bracket etc. |
| 68 | Supplying, fitting and fixing low-down cistern parts.(i) Internal fittings for cistern complete of approved make. |
| 69 | (iv) Rubber Kid |
| 70 | Dismantling wash basin with brackets with or without waste fittings. |
| 71 | white vitreous china best quality approved make (without fittings) supplied, fitted and fixed in position on 75 mm x 75 mm wooden blocks and C.I. brackeys including two coats of painting of C.I. brackets.(ii) 550 mm x 400 mm size |
| 72 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia(iii) 600 mm long |
| 73 | Supplying, fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (ii) 750 mm long |
| 74 | Dismantling and re-fixing Swan Neck Piller Cock after necessaryrepairing, packing, washering complete |
| 75 | Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand). |
| 76 | b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent). |
| 77 | f) CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand). |
| 78 | Renewing cromium plating of(a) bib cock/ stop cock/ pillar cock/ waste fittings. |
| 79 | Supplying, fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. (i) Polythene Flush Pipe |
| 80 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering etc.any colour, frame size 550 mm X 400 mm |
| 81 | Dismantling H.C.I. pipe with fittings including etc.(iii) 100 mm |
| 82 | Refixing H.C.I. pipe with fittings including etc.(iii) 100 mm |
| 83 | Removing chokage of H.C.I. or S.W. pipe with splite bamboo. (a) Underground. |
| 84 | Dismantling & Refixing pit cover. |
| 85 | Cleaning silt of inspection pit. |
| 86 | Cleaning silt of master trap pit. |
| 87 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) etc.(i) with Pakur Variety ( JSW/JSPL/SHYAM etc. |
| 88 | GST-18% (SGST=9% & CGST=9%) ADD |
| 89 | LABOUR WELFARE CESS = 1% ADD Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender