Tender For Shifting And Special Repair To Conversion Of Lt O/H Line Into Ug Cable With Connected Accessories At Entire Area Near P-269 At Bb Cantt, Srinagar.
Tender Value
18.44 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
18 days left
EMD
37000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Shifting And Special Repair To Conversion Of Lt O/H Line Into Ug Cable With Connected Accessories At Entire Area Near P-269 At Bb Cantt, Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismaintling existing tubular Pole from site with complete finishing existing surface, complete all as specified and directed |
| 2 | Dismantling existing cross arms of any capacity/size of MS channel or angle sections etc., complete all as specified and directed. |
| 3 | Dismantling existing insulators of any type and any size from pole including pins , completeall as specified and directed. |
| 4 | Dismantling stay assembly of any type embedded in cement concrete etc., complete all as specified and directed. |
| 5 | Taking out existing LED fitting of any sizes and refixing on new pole, complete all as specified and directed. Note: New pole shall be errected and measured separately in relevant items of this BOQ. |
| 6 | Dismantling and taking down the existing LT over head ACSR or AAC conductor of any description, complete all as specified and directed. |
| 7 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for laying of cables, pipes etc. and getting out all excavated material in any type of soil, complete all as specified and directed. |
| 8 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and as directed. |
| 9 | Removing of excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed. |
| 10 | M&L for locally available river sand in trenches 15 cm below cable and 8cm above / around UG cable for cable protection, in duct under and above the cables including punning around cable, complete all as specified and directed.Note: - Punned thickness shall only be measured and paid. |
| 11 | Supply and laying GI pipe 'light grade' 40 mm bore in trenches, under floors, roads, along poles for protection of cables with all necessary fittings and sealing ends, complete all as specified and directed. |
| 12 | Supply and laying GI pipe 'light grade' 50 mm bore in trenches, under floors, roads, along poles for protection of cables with all necessary fittings and sealing ends, complete all as specified and directed. |
| 13 | Supply and laying GI pipe 'light grade' 80 mm bore in trenches, under floors, roads, along poles for protection of cables with all necessary fittings and sealing ends, complete all as specified and directed. |
| 14 | Supply and laying unreinforced PCC Cable protection cover, class LV, type-1 flat with size 250 x 150 x 40 mm laid flat width wise, complete all as specified and directed. |
| 15 | Supply, laying and testing cable XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross- sectional area 150 sq mm, 3.5 core, complete all as specified and directed. |
| 16 | Supply, laying and testing cable XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross- sectional area 120 sq mm , 3.5 core, complete all as specified and directed. |
| 17 | Supply, laying and testing cable XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross- sectional area 70 sq mm, 3.5 core, complete all as specified and directed. |
| 18 | Supply, laying and testing cable XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross- sectional area 50 sq mm, 3.5 core, complete all as specified and directed. |
| 19 | Supply, laying and testing cable XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross- sectional area 25 sq mm, 4 core, complete all as specified and directed. |
| 20 | Supply, laying and testing cable XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross- sectional area 16 sq mm, 2 core, complete all as specified and directed. |
| 21 | Supply, laying and testing cable XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross- sectional area 10 sq mm, 2 core, complete all as specified and directed. |
| 22 | M & L for Copper busbar, weather proof, vermin proof, fully ventilated and fabricated out of MS CRCA sheet of 3.15mm thick with ingress protection of IP-54 grade having copper bus bar of rating 250 Amp capacity, 415 volt colour code with neutral including 160 Amp MCCB three phase and netural with encloser including indication lamp, Angle iron leg and PCC foundation, complete all as specified and directed. |
| 23 | Material and labour for road cutting of minimum sizes 30cm x 30cm for laying cables etc and making good the disturbed surface to match existing surface using plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate), complete all as specified and as derected. |
| 24 | Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 32x6mm size GI strip as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and directed. |
| 25 | Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 25x4mm size GI strip as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and directed. |
| 26 | Supply, installation, testing and commissioning of LT Panel board suitable for 415 Volts, 3 Phase 4 wire, 50 Hz AC supply system outdoor type floor mounted along with factory made type panel weather proof, vermin proof, fully ventilated and fabricated out of MS CRCA sheet of 3.15mm thick with ingress protection of IP-54 grade having copper bus bar of rating 450 Amps, three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The panel shall be front openable and having inner & outer shells. The inner shell dully compartmented for each control gear, including powder coating internally and externally the entire steel surfaces. All the cover shall be provided with suitable locking arrangements. The size of the outer shell should not be less than 1200mm x 1200mm x 450mm, mounted on angle iron stand made out of angle size 50 x 50 x 6mm grouted in PCC foundation in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), including accomodating the following control gears and accessories:- |
| 27 | (a) MCCB 250 Amps 4 pole ,36 KA 415 Volts (Incomer ) -01 No(b) MCCB 200 Amps 4 pole ,36 KA 415 Volts (Outgoing) -02 Nos(c) MCCB 160 Amps 4 pole ,25 KA 415 Volts (Outgoing) -02 Nos(d) copper Bus bar of capacity 450 Amps 3 phase and neutral -1 set.(e) Digital type voltmeer 0-500 volts.(f) Digital type Ammeter with CT of suitable ratio for reading upto 400 amps load-01 No |
| 28 | Supply and fixing steel tubular rmild steel swaged poles type 410 SP-31(9.0 meter long), fancy type Swan NeckType suitable for street lighting complete with CI base plate and finial with complete fixing accessories with Single swan neck arm with having terminal plate suitable for 3 phase 4 wire and earth connection for cable termination on DMC terminals alongwith MCB SP 6 Amp cable entry/exit space as per direction by engineer in charge Including foundation and copping, complete all as specified and directed |
| 29 | Supply and fix steel tubular rmild steel swaged poles type 410 SP-31(9.0 meter long), fancy type Swan NeckType suitable for street lighting complete with CI base plate and finial with complete fixing accessories with double swan neck arm with having terminal plate suitable for 3 phase 4 wire and earth connection for cable termination on DMC terminals alongwith MCB SP 6 Amp cable entry/exit space as per direction by engineer in charge Including foundation and copping, complete all as specified and directed |
| 30 | Supply and fixing of LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including taking down & thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed. |
| 31 | Supply and fixing, cable route marker for LT cable duly engraved (LT 1.1 KV cable) on 150 mm dia MS round plate 10mm thik duly painted with yellow colour paint and fix on MS angle of 40mmx40mmx5mm with nuts and bolts and embedded in PCC (1:2:4) concrete block of size 230mmx230mmx150mm, including necessary excavation & eathed work, complete as specified and directed. |
| 32 | Supplying, fixing, jointing and testing LT Service cable PVC insulated, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm x 2 Core, with electric connection lugs, laid in trenches/under floor or fixed naked with walls / on poles/ in ducts / in GI pipes etc., complete all as specified and directed. |
| 33 | Supply and laying HDPE DWC Pipe outer dia 90/76 mm. for protection and covering the XLPE cable, complete all as specified and directed. |
| 34 | S&F MCCB 4 pole 250 Amps breaking capacity 36 kA, fixed in existing panel including spreader link, complete all as specified and directed. |
| 35 | Supplying and fixing flexible type round PVC bedded with PVC insulated and sheathed with multi FRLS cable of 1100 volt grade with multistranded copper conductor wire of size 1.5 Sq.mm 3 core type (Nominal area) ISI Marked complete,all as specified and as directed by Engr-in-Charge . |
| 36 | Notes :-An amount of Rs.88,700.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender