Tender For Addn/Altn/Improvement To Certain Smqs At Air Force Stn Arjan Singh Under Ge (Af) Panagarh
Tender Value
43.66 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
18 days left
EMD
87500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bardhaman → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addn/Altn/Improvement To Certain Smqs At Air Force Stn Arjan Singh Under Ge (Af) Panagarh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed. |
| 2 | M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.16 sqm but n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 20 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 3 | M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.16 sqm but n. exc 0.36 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 10 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. |
| 4 | M&L for glazed ceramic coloured tiles of size 450x350x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 5 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. |
| 6 | M&L for 20mm thick granite stone slab (of any type) work (table rubbed and polished) in skirting/dado, steps, pillars, window sills, cooking platform laid over 20mm thick bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including rounding edges of granite slab as directed by Engineer-in-Charge as required at site complete all as specified and directed. |
| 7 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 8 | M&L for Brick work with fly ash bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 9 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | M&L for rendering(internal)15 mm thick in cement mortar (1:6) mixed with one percent Nano EHP powder by weight of cement as per manufacturer instruction on fair faces of brick work, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.(Note : Liquid Nano water proofing compound shall be measured and paid separately). |
| 11 | M&L for rendering ( external) 15 mm thick in cement mortar (1:4) in two layers (10mm +5mm) mixed with one percent Nano EHP powder by weight of cement as per manufacturer instruction on external fair faces of brick wall or concrete surfaces, finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed by Engineer-in-Charge.(Note : Liquid Nano water proofing compound shall be measured and paid separately). |
| 12 | M&L for rendering 5 mm thick in cement mortar (1:3) mixed with one percent Nano EHP powder by weight of cement as per manufacturer instruction on fair faces of concrete surface, as in ceiling and finished even and smooth without using extra cement after taking down old cement plaster complete all as specified and directed.(Note : Liquid Nano water proofing compound shall be measured and paid separately). |
| 13 | Supply only Nano water proofing compound.(Note:- Original purchase voucher of the item shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 14 | M&L for preparation of new plastered surfaces of ceilling and applying two coats of Nano high penetration and antibactrails oil bound distemper (premium quality) over a coat of Nano alkaline primer as per manufacturer instruction (@6.50 Sqm/ltr) with smooth roller finish complete all as specified and as directed by Engr-in-Charge.(Note:- (i) After painting works, cleaning of all floors, glass .etc by own arrangement .(ii) Original purchase voucher of the item shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 15 | S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in cement concrete (1:3:6) type C1, using 20mm stone aggregate and connecting to waste pipe complete as in repair all as specifed and directed.(Note: cost of cement concrete work included in this item.) |
| 16 | M&L for preparation of new plastered surfaces of walls and applying two coats of of Nano high penetration and antibactrails oil bound distemper (premium quality) over a coat of Nano alkaline primer over 1mm thick nano lime free putty as per manufacturer instruction (@6.50 Sqm/ltr) with smooth roller finish complete all as specified and directed specified and as directed by Engr-in-Charge. (Note:- (i) After painting works, cleaning of all floors, glass .etc by own arrangement .(ii) Original purchase voucher of the item shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 17 | M&L for two coats and above for applying Nano Water Base Elastomeric Finish over one coat of Nano Water Base Elastomeric Primer not containing toxic materials like Pb, Cr, Zn, biocides/organocides; having defect-free nano-particles with inhibiting characteristics having bacteria killing rate above 40% and high anti-fungal properties, with super-hydrophobic properties with contact angle of water more than 750 , with elongation (stretch ability) of more than 300%, in a nano-structured self assembled dispersion system with VOC level of less than 1% , 40 micron DFT of top coat, including scaffolding, surface preparation, cleaning etc. as per manufacturer instruction with smooth roller finishcomplete asr specified and as directed by the Engineer In-charge.((Note:- (i) After painting works, cleaning of all floors, glass .etc by own arrangement .(ii) Original purchase voucher of the item shall be submitted by the contractor to Engineer-in-Charge before taking any payment.) |
| 18 | M&L for 15mm dia angular stop cock with wall flange cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe complete as in repair all as specified and directed.(Make:-Jaquar, Cat No CON-059KN or equivalent of Hindware/ Kohler/Parryware) |
| 19 | S&F for 15mm bore pillar tap fancy type cast copper alloy with capstan heads chromium plated screwed down or high pressure with or without lettered hot or cold with long screwed shank and fly nuts for iron pipe fixed complete as in repair all as specified and directed.(Make:- Jaquar Cat No PRS-031 or equivalent of Hindware/ Kohler/Parryware) |
| 20 | M&L for 15mm dia bib tap long body with wall flange cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe complete as in repair all as specified and directed.(Make:-Jaquar, Cat No CON-107KN or equivalent of Hindware/ Kohler/Parryware) |
| 21 | S&F for 15mm bore fancy type chromium plated basin mixer hot and cold water screwed for wash basin, cast copper alloy with crutch or butterfly handle screwed for PVC Connection pipe or for brass ferrule and fixed complete as in repair all as specified and directed.(Make:-Jaquar, Cat No CON-167KNB or equivalent of Hindware/ Kohler/Parryware) |
| 22 | S&F for 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete as in repair all as specified and directed. |
| 23 | S&F for PVC low level flushing cistern 10 ltrs capacity white with inlet ball valve, float valve and handle including providing & fixing MS angle iron brackets, PVC flush pipe complete as in repair all as specified and as directed. |
| 24 | S&F for vitreous China water closet Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests with loose cast iron or vitreous china earthenware, 'P' or 'S' trap, connecting pipe to union of flushing cistern, inlet and overflow pipes connecting only to flushing cistern, including taking down old SWR pipe as required complete as in repair all as specified and directed.(Make:-Jaquar/ Hindware/ Kohler/Parryware) |
| 25 | S&F for EWC with wall hang cistern, drainage L bend pipe, gasket and installation kit with PP normal close seat cover, Hinges, fixing accessories and accessories set of size 350mm x 450mm x 395mm 'S' trap including to existing water supply ling and water closet pan complete as in repair all as speicified and directed.(Make:-Jaquar, Cat No CNS-WHT-551SNPP184LZ or equivalent of Hindware/ Kohler/Parryware) |
| 26 | S&F for flush tank low level cistern including connecting to existing water supply line and water closet pan complete as in repair. (Make : JAQUR Cat no-LYS-WHT-1309 or equivalent of Hindware/ Kohler/Parryware) |
| 27 | S&F for CP brass health faucet of 8mm dia, with 1.2 mtr long flexible tube and wall hook with back flow preventer including all fittings complete as in repair all as specified and directed.(Make:-Jaquar, Cat No ALD-573 or equivalent of Hindware/ Kohler/Parryware) |
| 28 | S&F for vitreous China wash basin, white, flat back, size 585mmx 450mm x 220mm with full pedestal including cutting for and pinning in ends of brackets or errecting stand, angle bracket bottle trap of size 32mm with 250mm & 190mm long wall connection pipes and wall flanges (but exclusive supply for waste pipe, tap) complete as in repair all as specified and directed.(Make:-Jaquar, Cat No FLS-WHT-5801 for wall hang basin, Cat No FLS-WHT-5301 for full pedestal, Cat No ALD-769L250X190 for bottle trap or equivalent of Hindware/ Kohler/Parryware) |
| 29 | S&F for Brass chromium plated towel ring with round flange complete as in repair all as specifed and directed.(Make:-Jaquar, Cat No ACN-1121N or equivalent of Hindware/ Kohler/Parryware) |
| 30 | M&L for 15mm dia two in one bib tap long body with wall flange cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe complete as in repair all as specified and directed.(Make:-Jaquar, Cat No CQT-23041 or equivalent of Hindware/ Kohler/Parryware) |
| 31 | S&F for towel rack 600mm long with lower hangers superior finished of stainless steel complete as in repair all as specifed and directed.(Make:-Jaquar, Cat No ACN-1181S or equivalent of Hindware/ Kohler/Parryware) |
| 32 | S&F for brass chromium plated wall mixer , 3 in 1 for system with provision for both Hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) complete as in repair all as specified and directed.(Make:-Jaquar, Cat No CON-217KN or equivalent of Hindware/ Kohler/Parryware) |
| 33 | S&F for PVC connection 15 mm dia with PTMT nuts of length 450mm at both ends screwed for iron pipe of 15 mm bore complete as in repair all as specified and directed. |
| 34 | S&F for 15 mm dia concealed stop valve with fitting sleeves, operating lever & adjustable wall flange with seal (comatible with ALD-083FT& ALD-089FT) valves cast copper chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe complete as in repair all as specified and directed.(Make:-Jaquar, Cat No CON-083FTK or equivalent of Hindware/ Kohler/Parryware) |
| 35 | S&F for bathroom cabinet with mirror made out of PVC moulded body and frame with shutter of size 550mm x 520mmx 100mm including necessary partition complete as approved by GE as in repairs all as specified and directed. (Make:Jaquar/Hindware/Parryware/Nilkamal) |
| 36 | S&F for sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as in repair all as specified and as directed. |
| 37 | Taking down PVC/CI pipe/Drain pipe jointed in cement mortar, taking out wall and eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 38 | S & F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor/trenches complete all as specified. |
| 39 | S & F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor/trenches complete all as specified. |
| 40 | S&F for 110mm bore PVC SWR bends with access door complete all as specified and directed. |
| 41 | S&F for 110mm bore PVC SWR vent cowl with access door complete all as specified and directed. |
| 42 | S&F for 110mm bore PVC SWR junction single (Single `T') equal or unequal with access door. complete all as specified and directed. |
| 43 | S&F for 110mm bore PVC SWR bends of any radius complete all as specified and directed. |
| 44 | S&F for 75mm bore PVC SWR bends of any radius complete all as specified and directed. |
| 45 | S&F for 75mm bore PVC SWR junction single (Single `T') equal or unequal with access door. complete all as specified and directed. |
| 46 | S&F for 75mm bore PVC SWR branch piece,double(double Y) equal or unequa complete all as specified and directed. |
| 47 | S&F for 75mm bore PVC SWR bends with access door complete all as specified and directed. |
| 48 | S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinned tacks, or stainless steel wire staples in steel windows/ wooden doors complete all as specified and directed. |
| 49 | S&F for 75mm bore PVC SWR reducers one end 110mm and another end reduced to 75mm complete all as specified and directed. |
| 50 | S & F for 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (i.e. CPVC bdass elbow, brass T, brass male threaded acaptor ( MTA/MBTA), brass female threaded acaptor ( FTA/FBTA), tank adaptor, union etc complete to walls and ceilings or laid in floors as in repair complete all as specified and directed.( Note: Cost of pipe and fittings (i.e. CPVC bdass elbow, brass T, brass male threaded acaptor ( MTA/MBTA), brass female threaded acaptor ( FTA/FBTA), tank adaptor, union and necessary cutting/cheesing in concrete/wall, pinning in, making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing etc. and making good, cutting not exceeding 10 cm girth are inclusive in the items ) |
| 51 | S & F for 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (i.e. CPVC bdass elbow, brass T, brass male threaded acaptor ( MTA/MBTA), brass female threaded acaptor ( FTA/FBTA), tank adaptor, union etc complete to walls and ceilings or laid in floors as in repair complete all as specified and directed.( Note: Cost of pipe and fittings (i.e. CPVC bdass elbow, brass T, brass male threaded acaptor ( MTA/MBTA), brass female threaded acaptor ( FTA/FBTA), tank adaptor, union and necessary cutting/cheesing in concrete/wall, pinning in, making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing etc. and making good, cutting not exceeding 10 cm girth are inclusive in the items ) |
| 52 | S & F for 16 mm outer dia CPVC Ball Valve as in repair complete all as specified and directed |
| 53 | Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed. |
| 54 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 55 | Taking down Shutters of any description area exc 1 sqm and n.exc 2.0 sqm for each leaf and refixing in same opening after cutting, adjusting and easing all as specified and directed |
| 56 | Taking down Shutters of any description area exc 1 sqm and n.exc 2.0 sqm for each leaf all as specified and directed |
| 57 | S&F for 28 to 30 mm thick (stiles) Factory Made Solid PVC Moulded Door Shutter, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 58 | S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ( Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made as per specification and drawing complete all as specified.) |
| 59 | S&F for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides of both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Engr-in-charge. |
| 60 | S&F for 30 mm thick glazed and skelton shutters of 2nd class hard wood open rebated and prepared to receive glass, gauge etc. edges of framing plain chamfered or rounded fitted without and mitred beads for securing glass etc., divided into squares sizes of members of shutters as specified in SSR Part-I, section 8Clause 8.20(a) with sash bars any numbers complete all as specified and directed by Engr-in-charge. |
| 61 | S&F for 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces 2nd class HW rail and style. The size ofrail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge. |
| 62 | S&F for factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified and directed by Engr-in-charge. |
| 63 | S&F for factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (including Glass/wire mesh ). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. complete all as specified and directed by Engr-in-charge. |
| 64 | S&F for 4.8 mm thick figured glass pin headed type and glazing with oil putty/beads and pins/spring pins in squares exc 0.50 sqm in each pane to be fixed in any position at any hight upto to two story building complete all as specified and directed. |
| 65 | M&L for 18/19mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work fixed with screws to timber frame work with external 6mm thick teak wood lipping after dismantling boarding of any description in any position with nailscomplete all as specified and directed. |
| 66 | M&L for 0.9mm thick decorative laminate type-1 of surface finished, colour and pattern as approved fixed with approved adeshive as per manufacturer instruction over plywood, other wood surface etc. after dismantling of old unservicable lamination complete all as specified and directed by the Engineer-in-Charge. |
| 67 | S&F for kitchen cabinet (colour) of depth 300mm made with 18mm thick PVC celluca plywood board (pre-laminated with 5mm thick PVC sheet), one side decorative lamination and other side balancing lamination sheet (white) consisting of carcass 18mm thick PVC sheet and provision of shutter made out of 18mm thick one side decorative lamination PVC sheet all required brackets, stainless steel screw, knobs, kinges, favi quick, solvent cement etc. fixed to wall with stainless steel screw and 18mm thick PVC shelves of density not less than 600 kg/cum by drilling holes complete. The panel shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish as per make and specification all as directed by Enigneer-in-Charge. (Note: colour, quality and make approved by GE and cost of all materials and labours including in this item) |
| 68 | S&F for kitchen cabinet (colour) of depth 600mm made with 18mm thick PVC celluca plywood board (pre-laminated with 5mm thick PVC sheet), one side decorative lamination and other side balancing lamination sheet (white) consisting of carcass 18mm thick PVC sheet and provision of shutter made out of 18mm thick one side decorative lamination PVC sheet all required brackets, stainless steel screw, knobs, kinges, favi quick, solvent cement etc. fixed to wall with stainless steel screw and 18mm thick PVC shelves of density not less than 600 kg/cum by drilling holes complete. The panel shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish as per make and specification all as directed by Enigneer-in-Charge. (Note: colour, quality and make approved by GE and cost of all materials and labours including in this item) |
| 69 | S&F for Rotational moulded polythylene water storage tank (ISI marked multilayer) with float valve, plastic lid cover, double layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball valve (minimum weigth of valve 210 gms) high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed complete all as specifed and directed. |
| 70 | S&F for Rotational moulded polythylene water storage tank (ISI marked multilayer) with float valve, plastic lid cover, double layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball valve (minimum weigth of valve 210 gms) high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed complete all as specifed and directed. Please Enable Macros to View BoQ information |
| 71 | S&F for Rotational moulded polythylene water storage tank (ISI marked multilayer) with float valve, plastic lid cover, double layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball valve (minimum weigth of valve 210 gms) high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed complete all as specifed and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender